Date   

Re: Zoom F6 recorder reviews and walk-through

Georgina Joyce
 

Hello Joe,

That is great, thank you.



On 27 Apr 2021, at 15:02, Joe Paton <joe@vi-ability.org.uk> wrote:

Hi,
Here's a link to the podcast you are interested in.

Joe

https://www.dropbox.com/s/x2gngih1kctbfmv/473_Mosen%20At%20Large%20Episode%2035%2C%20Gary%20ODonoghue%20reviews%20and%20demonstrates%20the%20Zoom%20F6%20multi-track%20field%20recorder%20and%20its%20iOS%20ap.mp3?dl=1




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Zoom F6 recorder reviews and walk-through

Joe Paton
 


Zoom F6 recorder reviews and walk-through

Georgina Joyce
 

Hello All,

Some time ago we discussed the Zoom F6. I am not sure if Neil did a review or if it was expressed that Neil will be doing a review. I know one of the Jonathon Mosen shows did a review but I can't remember if that was an at large show or not.

Any pointers to F6 reviews?

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Andy You don't need an adapter

frank cuta
 

I knew that there was a 3.5 mm jack somewhere?

Frank

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Georgina
Joyce
Sent: Saturday, April 24, 2021 9:13 AM
To: all-audio@groups.io
Subject: [all-audio] Andy You don't need an adapter


Hello Andy,

If you feel your X Y microphone on the right side. The face with the release
button. The top back corner is a 3.5mm socket. That is where you put your
binaural microphones. Of course you also need to turn it on in the menu
system. All this is described on page 88 of the manual.

Regards,



Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS









-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4855 / Virus Database: 4793/15883 - Release Date: 08/14/18
Internal Virus Database is out of date.


Re: Andy You don't need an adapter

Georgina Joyce
 

Hello Andy,

No you don't need fantom power it is called plug-in power it is on the same menu. Well we have "Be My Eyes" and AIRA who could provide assistance. However, as you know a lot of people here have the H6. Curtesy of Patrick here's a layout of the menu structure. The numbers represent how deep the level into the menus.

H6 Menu; press the menu button to go back a level

*1 PROJECT LIST
2 FOLDER1 to FOLDER10

*1 INPUT&OUTPUT; Menu is context sensitive, thus paired channels are grouped.
2 Lo Cut
3 Track L&R
3 Track1
3 Track2
3 Track3
3 Track4
3 All
2 Comp/Limiter
3 Track L&R
3 Track1
3 Track2
3 Track3
3 Track4
3 All
2 MS-RAW Monitor
3 Stereo
3 RAW
2 Phantom
3 On/Off
4 Track1
4 Track2
4 Track3
4 Track4
4 All
3 Voltage
4 +12V
4 +24V
4 +48V
2 Plugin Power
3 Off
3 On
2 Monitor Mixer
3 Tr L&R Pan
4 R100 to R1 Center L1 to L100
3 Tr L&R Level
4 Mute -48dB to 0.0dB to +12dB
3 Tr1 Pan
4 R100 to R1 Center L1 to L100
3 Tr1 Level
4 Mute -48dB to 0.0dB to +12dB
3 Tr2 Pan
4 R100 to R1 Center L1 to L100
3 Tr2 Level
4 Mute -48dB to 0.0dB to +12dB
3 Tr3 Pan
4 R100 to R1 Center L1 to L100
3 Tr3 Level
4 Mute -48dB to 0.0dB to +12dB
3 Tr4 Pan
4 R100 to R1 Center L1 to L100
3 Tr4 Level
4 Mute -48dB to 0.0dB to +12dB
2 VU Meter
4 There are 3 VU meters on LCD.
4 0VU= -10dBFS to -20dBFS
2 Line Out Level
-30dBu to 0dBu
2 MS Matrix
3 track 1/2
3 track 3/4
4 on/off
4 Mid Level
4 Side Level
4 Track Setting
5 tr1=Mid/tr2=Side
5 tr1=side/tr2=mid

*1 REC
2 Rec Format
3 WAV44.1kHz/16bit
3 WAV44.1kHz/24bit
3 WAV48kHz/16bit
3 WAV48kHz/24bit
3 WAV96kHz/16bit
3 WAV96kHz/24bit
3 MP3 48kbps
3 MP3 56kbps
3 MP3 64kbps
3 MP3 80kbps
3 MP3 96kbps
3 MP3 112kbps
3 MP3 128kbps
3 MP3 160kbps
3 MP3 192kbps
3 MP3 224kbps
3 MP3 256kbps
3 MP3 320kbps
2 Auto Rec
3 On/off
4 Off
4 On
3 Set Start & Stop Level
4 Start Level
5 -48dB to 0dB
5 Stop Level
6 -48dB to 0dB
3 Auto Stop
4 Off
4 0sec
4 1sec
4 2sec
4 3sec
4 4sec
2 Pre Rec
3 On
3 off
2 Backup Rec
3 On
3 Off
2 Project Name
3 Default
3 Date
2 Sound Marker
3 mode
4 Off
4 Rec Start
4 Rec Start and End
3 Sound
4 Sine
4 Slate
4 Hi Q
3 Level
4 (5 default)

*1 PLAY
2 AB Repeat
3 Use REW key and FF Key, and push the up/down key.
2 Play Mode
3 Play One
3 Play All
3 Repeat one
3 Repeat All

*1 PROJECT MENU
2 select project
3 Information
Displayed information of the recorded file on LCD.
3 Voice Memo
4 Add the voice memo for recorded files with Rec button and Stop Button.
3 Mark List
4 Displayed Mark list if you add the mark to recorded or recording file.
3 Project Mixer
4 Tr L&R Pan
5 R100 to R1 Center L1 to L100
4 Tr L&R Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr L&R Key
5 b6 to 0 to #6
4 Tr1 Pan
5 R100 to R1 Center L1 to L100
4 Tr1 Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr1 Key
5 b6 to 0 to #6
4 Tr2 Pan
5 R100 to R1 Center L1 to L100
4 Tr2 Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr2 Key
5 b6 to 0 to #6
4 Tr3 Pan
5 R100 to R1 Center L1 to L100
4 Tr3 Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr3 Key
5 b6 to 0 to #6
4 Tr4 Pan
5 R100 to R1 Center L1 to L100
4 Tr4 Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr4 Key
5 b6 to 0 to #6
3 Playback Speed
4 50% to 0% to 150%
3 Backup File
4 Off
4 On
3 Edit
4 Rename
5 Change the characters with up/down key and Rec key.
4 Normalize
5 Track L&R
5 Track1
5 Track2
5 Track3
5 Track4
4 Backup L&R
5 All
4 Divide
5 Use REW key and FF Key, and push the up/down key.
4 Trim
5 Use REW key and FF Key, and push the up/down key.
3 Overdub
4 Tr L&R Pan
5 R100 to R1 Center L1 to L100
4 Tr L&R Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr L&R Lo Cut
5 237Hz, 220Hz, 203Hz, 185Hz, 168Hz, 150Hz, 133Hz, 115Hz, 98Hz, 80Hz, Off
4 Tr L&R Comp
5 Off, Comp1, Comp2,Comp3, Limiter1, Limiter2, Limiter3
4 Tr L&R Plugin
5 On, Off
4 Tr 1 Pan
5 R100 to R1 Center L1 to L100
4 Tr 1 Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr 1 Lo Cut
5 237Hz, 220Hz, 203Hz, 185Hz, 168Hz, 150Hz, 133Hz, 115Hz, 98Hz, 80Hz, Off
4 Tr 1 Comp
5 Off, Comp1, Comp2,Comp3, Limiter1, Limiter2, Limiter3
4 Tr 1 Phantom
5 Off, +12V, +24V, +48V
4 Tr 2 Pan
5 R100 to R1 Center L1 to L100
4 Tr 2 Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr 2 Lo Cut
5 237Hz, 220Hz, 203Hz, 185Hz, 168Hz, 150Hz, 133Hz, 115Hz, 98Hz, 80Hz, Off
4 Tr 2 Comp
5 Off, Comp1, Comp2,Comp3, Limiter1, Limiter2, Limiter3
4 Tr 2 Phantom
5 Off, +12V, +24V, +48V
4 Tr 3 Pan
5 R100 to R1 Center L1 to L100
4 Tr 3 Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr 3 Lo Cut
5 237Hz, 220Hz, 203Hz, 185Hz, 168Hz, 150Hz, 133Hz, 115Hz, 98Hz, 80Hz, Off
4 Tr 3 Comp
5 Off, Comp1, Comp2,Comp3, Limiter1, Limiter2, Limiter3
4 Tr 3 Phantom
5 Off, +12V, +24V, +48V
4 Tr 4 Pan
5 R100 to R1 Center L1 to L100
4 Tr 4 Level
5 Mute -48dB to 0.0dB to +12dB
4 Tr 4 Lo Cut
5 237Hz, 220Hz, 203Hz, 185Hz, 168Hz, 150Hz, 133Hz, 115Hz, 98Hz, 80Hz, Off
4 Tr 4 Comp
5 Off, Comp1, Comp2,Comp3, Limiter1, Limiter2, Limiter3
4 Tr 4 Phantom
5 Off, +12V, +24V, +48V
3 Mixdown
4 Select Format
5 WAV44.1kHz/16bit
5 WAV44.1kHz/24bit
5 WAV48kHz/16bit
5 WAV48kHz/24bit
5 WAV96kHz/16bit
5 WAV96kHz/24bit
5 MP3 48kbps
5 MP3 56kbps
5 MP3 64kbps
5 MP3 80kbps
5 MP3 96kbps
5 MP3 112kbps
5 MP3 128kbps
5 MP3 160kbps
5 MP3 192kbps
5 MP3 224kbps
5 MP3 256kbps
5 MP3 320kbps
4 Execute
5 Do Mixdown when you push the up/down key.
3 Rebuild
4 Yes, No
3 Trash
3 Delete
3 Delete All Projects

*1 TOOL
2 Tuner
3 Chromatic
3 Guitar
3 Bass
3 Open A
3 Open D
3 Open E
3 Open G
3 DADGAD
2 Metronome
3 Click
4 Off, Rec and Play, Rec Only, Play Only
3 Pre Count
4 Off, 1, 2, 3, 4, 5, 6, 7, 8, Special
3 Tempo
4 40.0 to 120.0 to 250.0
3 Sound
4 Bell, Click, Stick, Cowbell, Hi-Q
3 Pattern
4 0/4, 1/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 8/4, 6/8,
3 Level
4 0 to 10

*1 SYSTEM
2 Date/Time
3 Year, Month, Day, H, M, S
2 Backlight
3 Power Saving
4 Off, On(Low-Backlight), On(Backlight-Off)
3 Brightness
4 Low, Mid, High
2 Battery
3 Alkaline
3 Ni-MH
2 Software Version
2 Displayed every system version on LCD.
System Version 1.10
Boot Version 1.00
Subsystem Version 1.00
2 factory Reset
3 Yes
3 No

*1 LANGUAGE
2 English
2 Japanese


*1 SD CARD
2 rename
2 Format
2 Performance Test
*1 USB
2 Card Reader
2 Audio Interface
3 Stereo Mix
4 PC/MAC
4 PC/MAC Using Battery Power
4 IPad Using Battery Power
3 Multitrack
4 PC/MAC
4 PC/MAC Using Battery Power

***USB Menus.
Once you've selected your interface type, input metering is displayed
*1 Input/output
2 Lo Cut
3 Track L&R
3 Track1
3 Track2
3 Track3
3 Track4
3 All
2 Comp/Limiter
3 Track L&R
3 Track1
3 Track2
3 Track3
3 Track4
3 All
2 direct monitor
3 on
3 off
2 MS-RAW Monitor
3 Stereo
3 RAW
2 Phantom
3 On/Off
4 Track1
4 Track2
4 Track3
4 Track4
4 All
3 Voltage
4 +12V
4 +24V
4 +48V
2 Plugin Power
3 Off
3 On
2 Loopback (listed, though unavailable in multitrack mode)
3 Off
3 On
2 Mixer
3 track pan
4 Track L Pan
4 track L Level
4 track R Pan
4 Track R level
same for the xlr/trs connecters
2 VU Meter
4 There are 3 VU meters on LCD.
4 0VU= -10dBFS to -20dBFS
2 Line Out Level
-30dBu to 0dBu
2 MS Matrix
3 track 1/2
3 track 3/4
4 on/off
4 Mid Level
4 Side Level
4 Track Setting
5 tr1=Mid/tr2=Side
5 tr1=side/tr2=mid

*1 Tool
2 Tuner
3 Chromatic
3 Guitar
3 Bass
3 Open A
3 Open D
3 Open E
3 Open G
3 DADGAD
*1 exit
2 No
2 Yes

On 25 Apr 2021, at 12:51, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi again Gena.

In Neil Ewars Review of the H6, he slightly mentions this socket and I was aware of it. But as you said, you need to go into Settings and selectPhantom and then how much power you require.

Incidentally once connected the X Y's are disarmed.

I quite hate the Settings menue. I know you get into them by pressing the settings button and out again by pressing the same button again, after makeing your changes and you do this via the joggle, pressing in to select, then menu again to get out.

. Most of the options in there probably don't concern me.

Once you have secured sighted assistance, for example, you could select 24 bit Wave at 192 Khz, so just like that, you can make other general settings, like setting up Phantom power,However because the menues don't speak, you really need sighted assistance to choose the general settings at the start.

So what do you do when you no longer need Phantom for a particular mic, Get sighted assistance again and and again so on.

This is why I'm buying 2 sets of BSM 9's. One set can go into this mini socket. And will not require Phantom, I think and the other mike is being converted to Twin XLR's, which may.

With this set up, I turn Phantom power on at the XLR side and off at the mini socket level.

Well, that's my theory! I can only try and if I'm right, then I'll have no need to frequently cry out for assistance from a sighted person.


Regarding the 1.5v pp9 battery/filter modules, I have been advised that Macro Madness have stopped making them, wonder why they would do that ???

They do suggest as an alternative:

Hi Andy,


The only problem is we discontinued our battery/filter modules. What we can do is wire them directly into phantom power converters or makeup an adapter cable with phantom. Your thoughts?


Thanks,
Mike

I'm getting this work done. I think but MM are very slow in responding to messages, so it will be a little bit of time yet.

Strange though Gena, why would they discontinu a product which they say is essential for another one of their products to work?

As I said at the start of this thread, I plugged the BSM 9's directly into my LS50 without the need of such a power pack?

Very best wishes.

Andy Logue.
----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Saturday, April 24, 2021 5:12 PM
Subject: [all-audio] Andy You don't need an adapter


Hello Andy,

If you feel your X Y microphone on the right side. The face with the release button. The top back corner is a 3.5mm socket. That is where you put your binaural microphones. Of course you also need to turn it on in the menu system. All this is described on page 88 of the manual.

Regards,



Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS








--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus





Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Andy You don't need an adapter

Andy
 

Hi again Gena.

In Neil Ewars Review of the H6, he slightly mentions this socket and I was aware of it. But as you said, you need to go into Settings and selectPhantom and then how much power you require.

Incidentally once connected the X Y's are disarmed.

I quite hate the Settings menue. I know you get into them by pressing the settings button and out again by pressing the same button again, after makeing your changes and you do this via the joggle, pressing in to select, then menu again to get out.

. Most of the options in there probably don't concern me.

Once you have secured sighted assistance, for example, you could select 24 bit Wave at 192 Khz, so just like that, you can make other general settings, like setting up Phantom power,However because the menues don't speak, you really need sighted assistance to choose the general settings at the start.

So what do you do when you no longer need Phantom for a particular mic, Get sighted assistance again and and again so on.

This is why I'm buying 2 sets of BSM 9's. One set can go into this mini socket. And will not require Phantom, I think and the other mike is being converted to Twin XLR's, which may.

With this set up, I turn Phantom power on at the XLR side and off at the mini socket level.

Well, that's my theory! I can only try and if I'm right, then I'll have no need to frequently cry out for assistance from a sighted person.


Regarding the 1.5v pp9 battery/filter modules, I have been advised that Macro Madness have stopped making them, wonder why they would do that ???

They do suggest as an alternative:

Hi Andy,


The only problem is we discontinued our battery/filter modules. What we can do is wire them directly into phantom power converters or makeup an adapter cable with phantom. Your thoughts?


Thanks,
Mike

I'm getting this work done. I think but MM are very slow in responding to messages, so it will be a little bit of time yet.

Strange though Gena, why would they discontinu a product which they say is essential for another one of their products to work?

As I said at the start of this thread, I plugged the BSM 9's directly into my LS50 without the need of such a power pack?

Very best wishes.

Andy Logue.

----- Original Message -----
From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Saturday, April 24, 2021 5:12 PM
Subject: [all-audio] Andy You don't need an adapter


Hello Andy,

If you feel your X Y microphone on the right side. The face with the release button. The top back corner is a 3.5mm socket. That is where you put your binaural microphones. Of course you also need to turn it on in the menu system. All this is described on page 88 of the manual.

Regards,



Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS








--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Andy You don't need an adapter

Georgina Joyce
 

Hello Andy,

If you feel your X Y microphone on the right side. The face with the release button. The top back corner is a 3.5mm socket. That is where you put your binaural microphones. Of course you also need to turn it on in the menu system. All this is described on page 88 of the manual.

Regards,



Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Tascam recorders accessible or not?

Anders Holmberg
 

Hi!
I really hope you’ll get an answer.
I think I will go for the entrance mixer face r4B which seems accessible out of the box.
However I will have to wait until I can afford it.
/A

23 apr. 2021 kl. 21:33 skrev Georgina Joyce <gena@gena-j.me.uk>:

Hello,

A youtube video review of the DR-22WL stated that there is more functionality with the IOS app. But that was some time ago. So both platforms are supported. I have sent an email to Tascam but I don't know how long I will have to wait for a reply.

Regards,
On 23 Apr 2021, at 19:22, Anders Holmberg <anders@pipkrokodil.se> wrote:

Hi Georgina.
Is this on the Iphone or Android phones?
I don’t know how they are as I thought that Tascam had such apps.
/A

23 apr. 2021 kl. 19:28 skrev Georgina Joyce <gena@gena-j.me.uk>:

Hello All,

I wondered if anyone has tried a Tascam that uses their app? Is there app accessible?

The 2 models I know of are the DR-22WL and the DR-44WL.

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS










Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS







Re: Tascam recorders accessible or not?

Georgina Joyce
 

Hello,

A youtube video review of the DR-22WL stated that there is more functionality with the IOS app. But that was some time ago. So both platforms are supported. I have sent an email to Tascam but I don't know how long I will have to wait for a reply.

Regards,
On 23 Apr 2021, at 19:22, Anders Holmberg <anders@pipkrokodil.se> wrote:

Hi Georgina.
Is this on the Iphone or Android phones?
I don’t know how they are as I thought that Tascam had such apps.
/A

23 apr. 2021 kl. 19:28 skrev Georgina Joyce <gena@gena-j.me.uk>:

Hello All,

I wondered if anyone has tried a Tascam that uses their app? Is there app accessible?

The 2 models I know of are the DR-22WL and the DR-44WL.

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS










Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Tascam recorders accessible or not?

Anders Holmberg
 

Hi Georgina.
Is this on the Iphone or Android phones?
I don’t know how they are as I thought that Tascam had such apps.
/A

23 apr. 2021 kl. 19:28 skrev Georgina Joyce <gena@gena-j.me.uk>:

Hello All,

I wondered if anyone has tried a Tascam that uses their app? Is there app accessible?

The 2 models I know of are the DR-22WL and the DR-44WL.

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS







Re: Plug converter

Georgina Joyce
 

Hello Andy,

You don't need any converter.

Here's an extract from the manual:

Names of parts
MIC/LINE input jack
(supports plug-in power)

Regards,


On 23 Apr 2021, at 17:39, Georgina Joyce <gena@gena-j.me.uk> wrote:

Hello Andy,

Here's a response from Gear 4 Music following my enquiry about connecting the Roland bionoral headset to my zoom. It's probably easier just to sell another recorder. Although I see this has an app to control it.

Dear Georgina Joyce,

Thank you for your email.

You would need a recorder that accepts the 3.5mm connection on both a mic input and headphone output such as the following:

https://www.gear4music.com/Recording-and-Computers/Tascam-DR-22WL-Hand-Held-Recorder-with-WiFi/141E

If you have any queries, please feel welcome to contact us.

Kind regards,

Jasmine / Sales and Customer Services




On 21 Apr 2021, at 23:47, Georgina Joyce <gena@gena-j.me.uk <mailto:gena@gena-j.me.uk>> wrote:

Hello Andy,

Just looking for some. I see that I can get these from the UK. Do you think they are the same as the BSM09? These do terminate in 2 3.5 jacks do the BSMs?

https://www.gear4music.com/PA-DJ-and-Lighting/Roland-CS-10EM-Binaural-Microphones-Earphones/DLV?origin=product-ads&gclid=CjwKCAjwmv-DBhAMEiwA7xYrd1-4A-s9C5ESD73lqLXLanxX2gvYYbsPMF1j-njlQ506pbgLQaDgshoC_MwQAvD_BwE

Gena
On 21 Apr 2021, at 21:11, Georgina Joyce <gena@gena-j.me.uk> wrote:

Hello Andy,

I recall us discussing this before. Don't you need to feed them 1.5V?

Could you remind me of the website for the microphones. Wasn't that American company going out of business?

Thanks,

On 21 Apr 2021, at 08:14, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi all.

I love my BSM 9 Binaural microphones but now I'd like to use them on my H6 and F8n to fully realise the potential and quality of these amazing mic's.

But I need to buy a converter from Mini plug to XLR.

I cannot search for "converter from Mini plug to XLR " in Google so I need either the converters name or model number to search for a sourse of purchase, perhaps on Amazon.

Any advice would be very welcome.

Very best wishes.

Andy Logue.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS






Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Tascam recorders accessible or not?

Georgina Joyce
 

Hello All,

I wondered if anyone has tried a Tascam that uses their app? Is there app accessible?

The 2 models I know of are the DR-22WL and the DR-44WL.

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Plug converter

Georgina Joyce
 

Hello Andy,

Here's a response from Gear 4 Music following my enquiry about connecting the Roland bionoral headset to my zoom. It's probably easier just to sell another recorder. Although I see this has an app to control it.

Dear Georgina Joyce,

Thank you for your email.

You would need a recorder that accepts the 3.5mm connection on both a mic input and headphone output such as the following:

https://www.gear4music.com/Recording-and-Computers/Tascam-DR-22WL-Hand-Held-Recorder-with-WiFi/141E

If you have any queries, please feel welcome to contact us.

Kind regards,

Jasmine / Sales and Customer Services




On 21 Apr 2021, at 23:47, Georgina Joyce <gena@gena-j.me.uk> wrote:

Hello Andy,

Just looking for some. I see that I can get these from the UK. Do you think they are the same as the BSM09? These do terminate in 2 3.5 jacks do the BSMs?

https://www.gear4music.com/PA-DJ-and-Lighting/Roland-CS-10EM-Binaural-Microphones-Earphones/DLV?origin=product-ads&gclid=CjwKCAjwmv-DBhAMEiwA7xYrd1-4A-s9C5ESD73lqLXLanxX2gvYYbsPMF1j-njlQ506pbgLQaDgshoC_MwQAvD_BwE

Gena
On 21 Apr 2021, at 21:11, Georgina Joyce <gena@gena-j.me.uk> wrote:

Hello Andy,

I recall us discussing this before. Don't you need to feed them 1.5V?

Could you remind me of the website for the microphones. Wasn't that American company going out of business?

Thanks,

On 21 Apr 2021, at 08:14, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi all.

I love my BSM 9 Binaural microphones but now I'd like to use them on my H6 and F8n to fully realise the potential and quality of these amazing mic's.

But I need to buy a converter from Mini plug to XLR.

I cannot search for "converter from Mini plug to XLR " in Google so I need either the converters name or model number to search for a sourse of purchase, perhaps on Amazon.

Any advice would be very welcome.

Very best wishes.

Andy Logue.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS






Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Plug converter

Andy
 

Hi Gena.

There has been a lot of confusion regarding Microphone Madness, but apparently the factory simply moved location.

I sent an email on Wednesday night asking if they were open for business and Mike got back to me the next morning.

"
Hi Andy,


Yes we are open for business and fortunately in these rough times didn't have to close our doors. If you have any questions please let me know.


Thanks,
Mike


*** We have moved. This is our new address ***


Microphone Madness Inc
8955 US Hwy 301 N
Suite 323
Parrish, Fl. 34219


Mon-Fri 9am-5pm EST
Toll Free# 1(877) 551-5623
Local# 1-941-479-7730
Fax# 1-866-434-9263
E-mail: sales@microphonemadness.com
www.microphonemadness.com
www.mmaudio.com

I am hoping to get back to him later today to place my order for a new pair of BSM 9 Binaural microphones, A Battery Module and a cable, as you have identified with mini jack socket to 2 XLR plugs.

So hopefully I'll be up and running shortly. I must remember when I get back to mike that I also ask for a couple of sets of wind sheilds as these are too easily dropped and lost.

So you are going for the Road NT1 binaural set. Don't know about those, but I do remember very faverable discussions concerning the Road NT 1Microphone. At one time I was intending to buy a pair of those, but ended up with theAudio Technica at22 ??? instead.

You must do a street sound podcast with your Roads and I will do the very same with the BSM9's

Let me know how you get on.

Very best wishes.

Andy Logue.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Re: Plug converter

Georgina Joyce
 

Hello Andy,

Just been reading up on this. The Zoom has mono XLR sockets. To get stereo you need to pair 1 and 2 together. Thus your adapter needs to consist of a mini socket to 2 XLR plugs.

Regards,


On 22 Apr 2021, at 00:09, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi Gena.

If you are plugging the BSM 9's into a wee Olympus DS50, you don't need to do that. I made a fantastic podcast doing just this. I'll be lucky if I can improve that quality on my Zoom F8 and I really honestly believe
that.

Gena.My podcast was a walk about around our small farm on a cold and sunny February morning. These mikes are Binaural and the sound was as crisp as the icey puddles under my feet. However, I was advised by a member within BCT to get the item you are talking about. 4 little screws to lift off the bottom and there is a PP9 in there, but I though it had something to do with the gain or more power to the Attinuation or something like that. The box had a short cable leading to a mini jack socket and the other wire coming from the plug led to a mini jack plug. It seemed to give my recordings a bit more body or base or simply more power. I've still got the box but one of the wind screens from the mics was dropped and lost. So I'm going to buy a new pair from the USA as soon as the shops open over there.

I just want to try the same arrangement out on both my Zooms. But those take XLR's so I need this adapter. It will be as simple as reducing a large jack to a mini jack for my headphones into my amp.
If it works, perhaps I'll add another set for the back of my neck! I've always wondered that that would sound like, walking down a busy main road with all the shops, people and cars, buses etc.



----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Wednesday, April 21, 2021 9:11 PM
Subject: Re: [all-audio] Plug converter


Hello Andy,

I recall us discussing this before. Don't you need to feed them 1.5V?

Could you remind me of the website for the microphones. Wasn't that American company going out of business?

Thanks,

On 21 Apr 2021, at 08:14, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi all.

I love my BSM 9 Binaural microphones but now I'd like to use them on my H6 and F8n to fully realise the potential and quality of these amazing mic's.

But I need to buy a converter from Mini plug to XLR.

I cannot search for "converter from Mini plug to XLR " in Google so I need either the converters name or model number to search for a sourse of purchase, perhaps on Amazon.

Any advice would be very welcome.

Very best wishes.

Andy Logue.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS











Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Plug converter

Georgina Joyce
 

Hello Andy,

Well they are up and running and selling online as far as I can tell. I think I am going to try the Roland set.

Regards,

On 22 Apr 2021, at 00:09, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi Gena.

If you are plugging the BSM 9's into a wee Olympus DS50, you don't need to do that. I made a fantastic podcast doing just this. I'll be lucky if I can improve that quality on my Zoom F8 and I really honestly believe
that.

Gena.My podcast was a walk about around our small farm on a cold and sunny February morning. These mikes are Binaural and the sound was as crisp as the icey puddles under my feet. However, I was advised by a member within BCT to get the item you are talking about. 4 little screws to lift off the bottom and there is a PP9 in there, but I though it had something to do with the gain or more power to the Attinuation or something like that. The box had a short cable leading to a mini jack socket and the other wire coming from the plug led to a mini jack plug. It seemed to give my recordings a bit more body or base or simply more power. I've still got the box but one of the wind screens from the mics was dropped and lost. So I'm going to buy a new pair from the USA as soon as the shops open over there.

I just want to try the same arrangement out on both my Zooms. But those take XLR's so I need this adapter. It will be as simple as reducing a large jack to a mini jack for my headphones into my amp.
If it works, perhaps I'll add another set for the back of my neck! I've always wondered that that would sound like, walking down a busy main road with all the shops, people and cars, buses etc.



----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Wednesday, April 21, 2021 9:11 PM
Subject: Re: [all-audio] Plug converter


Hello Andy,

I recall us discussing this before. Don't you need to feed them 1.5V?

Could you remind me of the website for the microphones. Wasn't that American company going out of business?

Thanks,

On 21 Apr 2021, at 08:14, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi all.

I love my BSM 9 Binaural microphones but now I'd like to use them on my H6 and F8n to fully realise the potential and quality of these amazing mic's.

But I need to buy a converter from Mini plug to XLR.

I cannot search for "converter from Mini plug to XLR " in Google so I need either the converters name or model number to search for a sourse of purchase, perhaps on Amazon.

Any advice would be very welcome.

Very best wishes.

Andy Logue.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS











Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Plug converter

Georgina Joyce
 

Hello Stewart,

All electrical circuits make a noise and this is true for microphones. The Rode NT1A is said to be the quietest mic on the market. It is outside the human hearing range. So anything recorded with it is not contaminated by the noise floor.

Regards,




On 22 Apr 2021, at 09:57, stewartross via groups.io <stewartross=sky.com@groups.io> wrote:

hi geana
i use this site gear 4 music all the time there a good site.
re the rode mic,
i got it from amazon
its a rode NT1-A
it comes with a pop shield,
a mic cable,
and a shockmount.
did u have to amplify the mic to make it work.
from stewart
----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Wednesday, April 21, 2021 11:47 PM
Subject: Re: [all-audio] Plug converter


Hello Andy,

Just looking for some. I see that I can get these from the UK. Do you think they are the same as the BSM09? These do terminate in 2 3.5 jacks do the BSMs?

https://www.gear4music.com/PA-DJ-and-Lighting/Roland-CS-10EM-Binaural-Microphones-Earphones/DLV?origin=product-ads&gclid=CjwKCAjwmv-DBhAMEiwA7xYrd1-4A-s9C5ESD73lqLXLanxX2gvYYbsPMF1j-njlQ506pbgLQaDgshoC_MwQAvD_BwE

Gena
On 21 Apr 2021, at 21:11, Georgina Joyce <gena@gena-j.me.uk> wrote:

Hello Andy,

I recall us discussing this before. Don't you need to feed them 1.5V?

Could you remind me of the website for the microphones. Wasn't that American company going out of business?

Thanks,

On 21 Apr 2021, at 08:14, Andy via groups.io <meikle.aiden=btinternetcom@groups.io> wrote:

Hi all.

I love my BSM 9 Binaural microphones but now I'd like to use them on my H6 and F8n to fully realise the potential and quality of these amazing mic's.

But I need to buy a converter from Mini plug to XLR.

I cannot search for "converter from Mini plug to XLR " in Google so I need either the converters name or model number to search for a sourse of purchase, perhaps on Amazon.

Any advice would be very welcome.

Very best wishes.

Andy Logue.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS






Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS











Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Plug converter

stewartross
 

hi geana
i use this site gear 4 music all the time there a good site.
re the rode mic,
i got it from amazon
its a rode NT1-A
it comes with a pop shield,
a mic cable,
and a shockmount.
did u have to amplify the mic to make it work.
from stewart

----- Original Message -----
From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Wednesday, April 21, 2021 11:47 PM
Subject: Re: [all-audio] Plug converter


Hello Andy,

Just looking for some. I see that I can get these from the UK. Do you think they are the same as the BSM09? These do terminate in 2 3.5 jacks do the BSMs?

https://www.gear4music.com/PA-DJ-and-Lighting/Roland-CS-10EM-Binaural-Microphones-Earphones/DLV?origin=product-ads&gclid=CjwKCAjwmv-DBhAMEiwA7xYrd1-4A-s9C5ESD73lqLXLanxX2gvYYbsPMF1j-njlQ506pbgLQaDgshoC_MwQAvD_BwE

Gena
On 21 Apr 2021, at 21:11, Georgina Joyce <gena@gena-j.me.uk> wrote:

Hello Andy,

I recall us discussing this before. Don't you need to feed them 1.5V?

Could you remind me of the website for the microphones. Wasn't that American company going out of business?

Thanks,

On 21 Apr 2021, at 08:14, Andy via groups.io <meikle.aiden=btinternetcom@groups.io> wrote:

Hi all.

I love my BSM 9 Binaural microphones but now I'd like to use them on my H6 and F8n to fully realise the potential and quality of these amazing mic's.

But I need to buy a converter from Mini plug to XLR.

I cannot search for "converter from Mini plug to XLR " in Google so I need either the converters name or model number to search for a sourse of purchase, perhaps on Amazon.

Any advice would be very welcome.

Very best wishes.

Andy Logue.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS






Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Help with a Behringer Mixer

Steve Matzura
 

It does, but it's odd because you can't mix what comes in via USB with what comes in via the analog inputs.

On 4/21/2021 3:18 PM, stewartross via groups.io wrote:
hi steve
re this mixer,
does it have a usb interface in it.
i have heard of these ones before.
from stew


----- Original Message ----- From: "Steve Matzura" <number6@noisynotes.com>
To: "All Audio" <all-audio@groups.io>
Sent: Wednesday, April 21, 2021 7:11 PM
Subject: Re: [all-audio] Help with a Behringer Mixer


As happens to me often, I posted the request for help, then found the perfect YouTube Video <https://www.youtube.com/watch?v=_hdJPNCaJE8> that explained everything I needed to know. I am neither the person who selected this mixer for the end-user, nor the end-user, but that person did ask me for some help with it. I did learn that mixing one's own audio as jacked in from the mixer's front panel with something coming over the USB circuit is not handled optimally. There is supposed to be a quirky workaround posted somewhere on the video's page, but I couldn't find it. No matter--it's really fit to purpose, and I don't think the owner will be doing any fancy radio production with it, so it almost doesn't matter.


On 4/21/2021 1:24 PM, Steve Matzura wrote:
A friend just got herself a Xenyx Q1202. I have the manual for it, but I need a physical description and button layout.


Thanks in advance.







Re: Plug converter

Andy
 

Hi Gena.

If you are plugging the BSM 9's into a wee Olympus DS50, you don't need to do that. I made a fantastic podcast doing just this. I'll be lucky if I can improve that quality on my Zoom F8 and I really honestly believe
that.

Gena.My podcast was a walk about around our small farm on a cold and sunny February morning. These mikes are Binaural and the sound was as crisp as the icey puddles under my feet. However, I was advised by a member within BCT to get the item you are talking about. 4 little screws to lift off the bottom and there is a PP9 in there, but I though it had something to do with the gain or more power to the Attinuation or something like that. The box had a short cable leading to a mini jack socket and the other wire coming from the plug led to a mini jack plug. It seemed to give my recordings a bit more body or base or simply more power. I've still got the box but one of the wind screens from the mics was dropped and lost. So I'm going to buy a new pair from the USA as soon as the shops open over there.

I just want to try the same arrangement out on both my Zooms. But those take XLR's so I need this adapter. It will be as simple as reducing a large jack to a mini jack for my headphones into my amp.
If it works, perhaps I'll add another set for the back of my neck! I've always wondered that that would sound like, walking down a busy main road with all the shops, people and cars, buses etc.

----- Original Message -----
From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Wednesday, April 21, 2021 9:11 PM
Subject: Re: [all-audio] Plug converter


Hello Andy,

I recall us discussing this before. Don't you need to feed them 1.5V?

Could you remind me of the website for the microphones. Wasn't that American company going out of business?

Thanks,

On 21 Apr 2021, at 08:14, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi all.

I love my BSM 9 Binaural microphones but now I'd like to use them on my H6 and F8n to fully realise the potential and quality of these amazing mic's.

But I need to buy a converter from Mini plug to XLR.

I cannot search for "converter from Mini plug to XLR " in Google so I need either the converters name or model number to search for a sourse of purchase, perhaps on Amazon.

Any advice would be very welcome.

Very best wishes.

Andy Logue.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS

161 - 180 of 4070