Date   

Re: podcasting, any tips?

JM Casey
 

Crazy volume differences are one of my pet peeves listening to podcasts. I like to listen to them while doing stuff around the home, with my desktop PC broadcasting to my bluetooth headphones. It works great until someone inserts an audio clip from somewhere, or there's a guest on, whose volume is so different from that of the main host -- either loud enough to burst my eardrums or so quiet I have to crank it and then quickly turn down again when the clip is over.
Anyway, you say you're already using plugins and doing post-processing. Is that not working out for you? What are you doing to the audio exactly? Noramlising audio volume?
For your speaking voice, a bit of compression might be nice, but I think eq is maybe the most important thing to apply -- in my opinion you want to bring out the higher frequencies of the human voice a bit, to make things like sibilances clear and well-defined but not so sharp that they're distorting (this shouldn't happen so much with a good microphone, anyway).

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of David Mehler
Sent: February 15, 2021 06:43 PM
To: all-audio@groups.io
Subject: [all-audio] podcasting, any tips?

Hello,

I'm dipping in to podcasting. I've made and submitted one, but think I could do better. The podcast is a demo which is recorded on my s10+ using amazing mp3 recorder, and demoing features of the phone so it's also talking.

One thing I've noticed is sometimes the audio isn't right, it's either to loud or not loud enough, I've maximized volume. I am using
goldwave6 with some added-vst-plugins for post-processing. The files are recorded as wav files then saved as 44.1Khz 64Kbps mp3 files.

I thought about giving a compressor a go to make my voice crisper and the phone volume more even as well, but don't want to smash things to soundly.

I'd appreciate any tips.

Thanks.
Dave.


podcasting, any tips?

David Mehler
 

Hello,

I'm dipping in to podcasting. I've made and submitted one, but think I
could do better. The podcast is a demo which is recorded on my s10+
using amazing mp3 recorder, and demoing features of the phone so it's
also talking.

One thing I've noticed is sometimes the audio isn't right, it's either
to loud or not loud enough, I've maximized volume. I am using
goldwave6 with some added-vst-plugins for post-processing. The files
are recorded as wav files then saved as 44.1Khz 64Kbps mp3 files.

I thought about giving a compressor a go to make my voice crisper and
the phone volume more even as well, but don't want to smash things to
soundly.

I'd appreciate any tips.

Thanks.
Dave.


problems solved, explanation inside

vinny Samarco
 

Hi List,
Thanks to all who have written and made suggestions. The answer had nothing to do with what I was writing. It seems that the keys for left and right bracket were not labeled as to their function. So my sighted techie frien went into the options menue, and to the keyboard menue and labeled the bracket keys to say start and finish markers. Now the program seemes normally. I can’t tell you what a relief this is-but I’m sure you understand.
Thanks again.
Vinny


Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

Robert Byers
 

Hi Vinny!


Try I for starting marker, and O for the ending one.


Rob.


Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

Colin Howard
 

Greetings,

I am in the UK, my time at writing is 06:46.

I will try and answer you in what may turn out to be a long email.

I assume you are using GW V6.54, I have this the latest, not yet installed
and am also using Windows 7.

Now to have my breakfast!

On Wed, 10 Feb 2021 20:03:39 -0700, amongst other things, "vinny Samarco"
<vinnysam47@gmail.com> wrote:


Hi Colin,
I tried doing what you said, but can't get the
cursor positions to change, no matter what I do.
Let me ask a couple of questions. 1, . What does control G do? 2,
What and were is the play tab? and 3, I don't understand the zoom in and
out selections in the view menue. Depending were you are, and how much time
you have, maybe we can get together on zoom or by phone if you are in Canada
or the U.S.
It's funny, I have been using gw since at least 2009, and have been very
successful with it until now.
Thanks for your suggestions. I'll keep trying different things.
Vinny-----Original Message-----
From: Colin Howard
Sent: Wednesday, February 10, 2021 2:12 AM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

Greetings,

OK, this is how I would do it but at present still using V5.70.

1. Start playing file.

2. Do Ctrl with g and enter the new cursor position, press enter, you are
now at the position entered so pause file and press left bracket placing
start marker at cursor position, if you want to start at the beginning, your
start marker is already at 0.00, when you start playing the file, so do the
cursor thing for the finish marker which is right bracket.

3. Make sure you have in the play tab the 0.00 edit field set to in my case
0.15, which means whenever I move the cursor or marker, I hear 15 hundredths
of any sound, so now you have your cursor at the end of the sound, adjust
the marker bacvk/forward to ensure you encompas the whole required deletion,
play the end to ensure.

4. Press delete key, job done.

If you need delete partway through a file, use the above to set start and
end markers, adjusting markers using a very small zoom setting I have mine
set to one second, also have play2 set to play selection and play3 set to
play view, in my case mostly one second,

On Tue, 9 Feb 2021 18:07:56 -0700, amongst other things, "vinny Samarco"
<vinnysam47@gmail.com> wrote:


Hi,
Yes, I said the wrong thing, I am using the left and right bracket keys.
Thanks,
Vinny
--- --Original Message-----
From: John Covici
Sent: Tuesday, February 09, 2021 5:45 PM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

It should left and right brackets not parens.

On Tue, 09 Feb 2021 19:34:20 -0500,
vinny Samarco wrote:


Hi Tim and Joe and list,
I really don't know what is going on. The file is one hour
57 minutes long. My start marker is at the beginning, I have
checked ten minutes for each press of the right arrow, I have
also check follow playback and the scroll lock. Let's say I want
to remove the first hour of the file, my start is at the
beginning. Now, wherever in the file I press the finish marker,
I only here one hour 57 minutes which is the total length of
the file. . Of course I am using the left and right paren as
start and finish markers. I am about to see if there is another
program that would work. I am using windows 10 with NVDA and all
the gw aps that are supposed to work with NVDA. Help, please.
Vinny
P. S. I have used gw for 12 years and have never run into this before.
Thanks for listening. Original Message----- From: Joe Paton
Sent: Tuesday, February 09, 2021 2:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Fw: Another Goldwave Question

Hello Vinny,
try pressing control-l
this used to be called scroll lock I think, now it is call follow
playback.

it should be checked in the view menue.

HTH
Joe









---
This email has been checked for viruses by AVG.
https://www.avg.com


Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

vinny Samarco
 

Hi Colin,
I tried doing what you said, but can't get the
cursor positions to change, no matter what I do.
Let me ask a couple of questions. 1, . What does control G do? 2, What and were is the play tab? and 3, I don't understand the zoom in and out selections in the view menue. Depending were you are, and how much time you have, maybe we can get together on zoom or by phone if you are in Canada or the U.S.
It's funny, I have been using gw since at least 2009, and have been very successful with it until now.
Thanks for your suggestions. I'll keep trying different things.

Vinny-----Original Message-----
From: Colin Howard
Sent: Wednesday, February 10, 2021 2:12 AM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

Greetings,

OK, this is how I would do it but at present still using V5.70.

1. Start playing file.

2. Do Ctrl with g and enter the new cursor position, press enter, you are
now at the position entered so pause file and press left bracket placing
start marker at cursor position, if you want to start at the beginning, your
start marker is already at 0.00, when you start playing the file, so do the
cursor thing for the finish marker which is right bracket.

3. Make sure you have in the play tab the 0.00 edit field set to in my case
0.15, which means whenever I move the cursor or marker, I hear 15 hundredths
of any sound, so now you have your cursor at the end of the sound, adjust
the marker bacvk/forward to ensure you encompas the whole required deletion,
play the end to ensure.

4. Press delete key, job done.

If you need delete partway through a file, use the above to set start and
end markers, adjusting markers using a very small zoom setting I have mine
set to one second, also have play2 set to play selection and play3 set to
play view, in my case mostly one second,

On Tue, 9 Feb 2021 18:07:56 -0700, amongst other things, "vinny Samarco"
<vinnysam47@gmail.com> wrote:


Hi,
Yes, I said the wrong thing, I am using the left and right bracket keys.
Thanks,
Vinny
--- --Original Message-----
From: John Covici
Sent: Tuesday, February 09, 2021 5:45 PM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

It should left and right brackets not parens.

On Tue, 09 Feb 2021 19:34:20 -0500,
vinny Samarco wrote:


Hi Tim and Joe and list,
I really don't know what is going on. The file is one hour
57 minutes long. My start marker is at the beginning, I have
checked ten minutes for each press of the right arrow, I have
also check follow playback and the scroll lock. Let's say I want
to remove the first hour of the file, my start is at the
beginning. Now, wherever in the file I press the finish marker,
I only here one hour 57 minutes which is the total length of
the file. . Of course I am using the left and right paren as
start and finish markers. I am about to see if there is another
program that would work. I am using windows 10 with NVDA and all
the gw aps that are supposed to work with NVDA. Help, please.
Vinny
P. S. I have used gw for 12 years and have never run into this before.
Thanks for listening. Original Message----- From: Joe Paton
Sent: Tuesday, February 09, 2021 2:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Fw: Another Goldwave Question

Hello Vinny,
try pressing control-l
this used to be called scroll lock I think, now it is call follow
playback.

it should be checked in the view menue.

HTH
Joe









---
This email has been checked for viruses by AVG.
https://www.avg.com


Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

Colin Howard
 

Greetings,

OK, this is how I would do it but at present still using V5.70.

1. Start playing file.

2. Do Ctrl with g and enter the new cursor position, press enter, you are
now at the position entered so pause file and press left bracket placing
start marker at cursor position, if you want to start at the beginning, your
start marker is already at 0.00, when you start playing the file, so do the
cursor thing for the finish marker which is right bracket.

3. Make sure you have in the play tab the 0.00 edit field set to in my case
0.15, which means whenever I move the cursor or marker, I hear 15 hundredths
of any sound, so now you have your cursor at the end of the sound, adjust
the marker bacvk/forward to ensure you encompas the whole required deletion,
play the end to ensure.

4. Press delete key, job done.

If you need delete partway through a file, use the above to set start and
end markers, adjusting markers using a very small zoom setting I have mine
set to one second, also have play2 set to play selection and play3 set to
play view, in my case mostly one second,

On Tue, 9 Feb 2021 18:07:56 -0700, amongst other things, "vinny Samarco"
<vinnysam47@gmail.com> wrote:


Hi,
Yes, I said the wrong thing, I am using the left and right bracket keys.
Thanks,
Vinny
--- --Original Message-----
From: John Covici
Sent: Tuesday, February 09, 2021 5:45 PM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

It should left and right brackets not parens.

On Tue, 09 Feb 2021 19:34:20 -0500,
vinny Samarco wrote:


Hi Tim and Joe and list,
I really don't know what is going on. The file is one hour
57 minutes long. My start marker is at the beginning, I have
checked ten minutes for each press of the right arrow, I have
also check follow playback and the scroll lock. Let's say I want
to remove the first hour of the file, my start is at the
beginning. Now, wherever in the file I press the finish marker,
I only here one hour 57 minutes which is the total length of
the file. . Of course I am using the left and right paren as
start and finish markers. I am about to see if there is another
program that would work. I am using windows 10 with NVDA and all
the gw aps that are supposed to work with NVDA. Help, please.
Vinny
P. S. I have used gw for 12 years and have never run into this before.
Thanks for listening. Original Message----- From: Joe Paton
Sent: Tuesday, February 09, 2021 2:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Fw: Another Goldwave Question

Hello Vinny,
try pressing control-l
this used to be called scroll lock I think, now it is call follow
playback.

it should be checked in the view menue.

HTH
Joe









---
This email has been checked for viruses by AVG.
https://www.avg.com


Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

vinny Samarco
 

Hi,
Yes, I said the wrong thing, I am using the left and right bracket keys.
Thanks,
Vinny

--- --Original Message-----
From: John Covici
Sent: Tuesday, February 09, 2021 5:45 PM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

It should left and right brackets not parens.

On Tue, 09 Feb 2021 19:34:20 -0500,
vinny Samarco wrote:


Hi Tim and Joe and list,
I really don't know what is going on. The file is one hour
57 minutes long. My start marker is at the beginning, I have
checked ten minutes for each press of the right arrow, I have
also check follow playback and the scroll lock. Let's say I want
to remove the first hour of the file, my start is at the
beginning. Now, wherever in the file I press the finish marker,
I only here one hour 57 minutes which is the total length of
the file. . Of course I am using the left and right paren as
start and finish markers. I am about to see if there is another
program that would work. I am using windows 10 with NVDA and all
the gw aps that are supposed to work with NVDA. Help, please.
Vinny
P. S. I have used gw for 12 years and have never run into this before.
Thanks for listening. Original Message----- From: Joe Paton
Sent: Tuesday, February 09, 2021 2:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Fw: Another Goldwave Question

Hello Vinny,
try pressing control-l
this used to be called scroll lock I think, now it is call follow
playback.

it should be checked in the view menue.

HTH
Joe








--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

John Covici
 

It should left and right brackets not parens.

On Tue, 09 Feb 2021 19:34:20 -0500,
vinny Samarco wrote:


Hi Tim and Joe and list,
I really don't know what is going on. The file is one hour
57 minutes long. My start marker is at the beginning, I have
checked ten minutes for each press of the right arrow, I have
also check follow playback and the scroll lock. Let's say I want
to remove the first hour of the file, my start is at the
beginning. Now, wherever in the file I press the finish marker,
I only here one hour 57 minutes which is the total length of
the file. . Of course I am using the left and right paren as
start and finish markers. I am about to see if there is another
program that would work. I am using windows 10 with NVDA and all
the gw aps that are supposed to work with NVDA. Help, please.
Vinny
P. S. I have used gw for 12 years and have never run into this before.
Thanks for listening. Original Message----- From: Joe Paton
Sent: Tuesday, February 09, 2021 2:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Fw: Another Goldwave Question

Hello Vinny,
try pressing control-l
this used to be called scroll lock I think, now it is call follow
playback.

it should be checked in the view menue.

HTH
Joe








--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


I am stumppedRe: [all-audio] Fw: Another Goldwave Question

vinny Samarco
 

Hi Tim and Joe and list,
I really don't know what is going on. The file is one hour 57 minutes long. My start marker is at the beginning, I have checked ten minutes for each press of the right arrow, I have also check follow playback and the scroll lock. Let's say I want to remove the first hour of the file, my start is at the beginning. Now, wherever in the file I press the finish marker, I only here one hour 57 minutes which is the total length of the file. . Of course I am using the left and right paren as start and finish markers. I am about to see if there is another program that would work. I am using windows 10 with NVDA and all the gw aps that are supposed to work with NVDA. Help, please.
Vinny
P. S. I have used gw for 12 years and have never run into this before.
Thanks for listening. Original Message-----
From: Joe Paton
Sent: Tuesday, February 09, 2021 2:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Fw: Another Goldwave Question

Hello Vinny,
try pressing control-l
this used to be called scroll lock I think, now it is call follow
playback.

it should be checked in the view menue.

HTH
Joe


Re: Fw: Another Goldwave Question

Joe Paton
 

Hello Vinny,
try pressing control-l
this used to be called scroll lock I think, now it is call follow
playback.

it should be checked in the view menue.

HTH
Joe


Re: Fw: Another Goldwave Question

tim cumings
 

Vinny, you have got to start playing the file before you jump to the middle of the file to set your start marker. Begin playing the file. Jump to the section where you want to be and press the pause key, which isfunction key 7. Then press your left bracket key to place your start marker.

On 2/9/2021 10:56 AM, vinny Samarco wrote:

From: Vinny Samarco
Sent: Tuesday, February 09, 2021 8:45 AM
To: allaudio@groups.io
Subject: Another Goldwave Question

Hi list,
Ever since I totally updated goldwave from the old 5.8 to the 6.* I have had editing issues. These days, I don’t know if the cause is Gw, NVDA or my lack of knowledge.
I am trying to edit a long mp3 file. I first select all in the file with control A. Then I set up my navigating time to move the arrows either ten minutes or one hour. When I get to the middle of the file I press the start marker, which says 0.00 Etc. then, I move the right arrow to the end of the needed editing section and press finish marker. Then I press delete. This deletes the entire file, rather than the edited section, so I have to use undo, to get the file back. Isn’t there a way to track the cursor location so that wherever I press the start marker to edit, I shouldn’t hear 0.00?
I’m sure I am doing something wrong, but I don’t know what. Thanks for any help and suggestions.
Vinny Samarco




Fw: Another Goldwave Question

vinny Samarco
 

From: Vinny Samarco
Sent: Tuesday, February 09, 2021 8:45 AM
To: allaudio@groups.io
Subject: Another Goldwave Question

Hi list,
Ever since I totally updated goldwave from the old 5.8 to the 6.* I have had editing issues. These days, I don’t know if the cause is Gw, NVDA or my lack of knowledge.
I am trying to edit a long mp3 file. I first select all in the file with control A. Then I set up my navigating time to move the arrows either ten minutes or one hour. When I get to the middle of the file I press the start marker, which says 0.00 Etc. then, I move the right arrow to the end of the needed editing section and press finish marker. Then I press delete. This deletes the entire file, rather than the edited section, so I have to use undo, to get the file back. Isn’t there a way to track the cursor location so that wherever I press the start marker to edit, I shouldn’t hear 0.00?
I’m sure I am doing something wrong, but I don’t know what. Thanks for any help and suggestions.
Vinny Samarco


Audible on the Victor Reader Stratus.

Hamit Campos
 

Hi friends. I'm reading the hidden history of Oligarchy by Doctor Thom
Hartmann on Audible. For now I was using the cloud player. But can someone
remind me, the VR Strattus can be authorized for Audible can't it? Oh and if
the person that asked about Autible on the JFW list happens to be here as
well or if someone else that is can let them know the cloud player is
usable.


Re: Recording with GoldWave

Rob
 

Be careful when you're messing around with audio settings. If you wind up turning off JAWS speech, you can probably use Be My Eyes or AIRA to get JAWS back on.

Rob

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Howard Traxler
Sent: Sunday, January 31, 2021 6:59 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Recording with GoldWave

Thanks Robert, However, in the dialog selection you described, there are two possible sound devices. I don't remember the exact messages but they indicate that the devices are not available. It seems that I'll have to go into windows control panel, sound devices and make some settings. I get lost in there. I have to keep trying because I want to use this machine to make some recordings.

Howard

On 1/24/2021 8:38 PM, Robert Byers wrote:

Hi Howard!


In Goldwave, press F11, this should bring you in to System.

If it doesn't say System, tab until you here help then tab once more.
Now you can press right Arrow until it say System.

If you tab once from System you should here Playback. Up and down
until you get the sound card you use for playback. Then tab and you
will here Record, again up and down Arrow until you here the sound
card you need. Now tab to OK and press Enter.

I hope this helps.


Rob.







Re: Recording with GoldWave

Howard Traxler
 

Thanks Robert,  However, in the dialog selection you described, there are two possible sound devices.  I don't remember the exact messages but they indicate that the devices are not available.  It seems that I'll have to go into windows control panel, sound devices and make some settings.  I get lost in there.  I have to keep trying because I want to use this machine to make some recordings.

Howard

On 1/24/2021 8:38 PM, Robert Byers wrote:

Hi Howard!


In Goldwave, press F11, this should bring you in to System.

If it doesn't say System, tab until you here help then tab once more.  Now you can press right Arrow until it say System.

If you tab once from System you should here Playback.  Up and down until you get the sound card you use for playback.  Then tab and you will here Record, again up and down Arrow until you here the sound card you need.  Now tab to OK and press Enter.

I hope this helps.


Rob.






Re: Recording with GoldWave

Robert Byers
 

Hi Howard!


In Goldwave, press F11, this should bring you in to System.

If it doesn't say System, tab until you here help then tab once more.  Now you can press right Arrow until it say System.

If you tab once from System you should here Playback.  Up and down until you get the sound card you use for playback.  Then tab and you will here Record, again up and down Arrow until you here the sound card you need.  Now tab to OK and press Enter.

I hope this helps.


Rob.


Recording with GoldWave

Howard Traxler
 

Hi All,
Before my Windows update, recording with GoldWave worked fine.  Now, when I try to record, I get the error message: Cannot start recording.  And it refers me to "Help".  Help just opens the manual.  Google tells me that  the error pertains to in input device.  The input (and output) device seems to be WASAPI.  Is that a problem and how can I change it if necessary; and what should I change it to?

Thank you to anyone who can help.

Howard


Re: Bose 700

Anders Holmberg
 

Hi!
Yes you should.
Hifiklubben.dk <http://hifiklubben.dk/> sells them.
/A

21 jan. 2021 kl. 10:30 skrev Brian Olesen <brian@blindkom.dk>:

Hi anders,
Very interesting. I've never heard their headphones. Maybe I should give them a listen.

Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Anders Holmberg
Sendt: 20. januar 2021 21:23
Til: all-audio@groups.io
Emne: Re: [all-audio] Bose 700

Hi!
I really don’t remember.
It was one of those starting with wh something.
I prefer dali and their headphones.
At least the sound but not the noise canceling.
/A

20 jan. 2021 kl. 20:51 skrev Brian Olesen <brian@blindkom.dk>:

Hi,
Which of the sonys didn't you like?
The quite new xm4 does a great job, but personal taste matters here. 😊
Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Anders
Holmberg
Sendt: 20. januar 2021 18:55
Til: all-audio@groups.io
Emne: Re: [all-audio] Bose 700

Hi!
I didn’t like the sound on the Sony headphones.
But that was just a quick listening on a hifi store.
/A

20 jan. 2021 kl. 10:58 skrev Brian Olesen <brian@blindkom.dk>:

HI,
Very much like the QC35 II but with some improvement for the function
your own voice.
It's still Sony, who has the best noise reduction.

Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Hamit
Campos
Sendt: 19. januar 2021 22:13
Til: all-audio@groups.io
Emne: Re: [all-audio] Bose 700

By the way how do they sound?

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Anders
Holmberg
Sent: Tuesday, January 19, 2021 2:29 PM
To: all-audio@groups.io
Subject: [all-audio] Bose 700

H i!
Is anyone using the Bose 700 here?
I am just wondering how it works with the touch gestures?
I suppose they will work for a blind person as there are no display
on the headphones.
/A





































Re: Bose 700

Brian Olesen
 

Hi anders,
Very interesting. I've never heard their headphones. Maybe I should give them a listen.

Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Anders Holmberg
Sendt: 20. januar 2021 21:23
Til: all-audio@groups.io
Emne: Re: [all-audio] Bose 700

Hi!
I really don’t remember.
It was one of those starting with wh something.
I prefer dali and their headphones.
At least the sound but not the noise canceling.
/A

20 jan. 2021 kl. 20:51 skrev Brian Olesen <brian@blindkom.dk>:

Hi,
Which of the sonys didn't you like?
The quite new xm4 does a great job, but personal taste matters here. 😊
Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Anders
Holmberg
Sendt: 20. januar 2021 18:55
Til: all-audio@groups.io
Emne: Re: [all-audio] Bose 700

Hi!
I didn’t like the sound on the Sony headphones.
But that was just a quick listening on a hifi store.
/A

20 jan. 2021 kl. 10:58 skrev Brian Olesen <brian@blindkom.dk>:

HI,
Very much like the QC35 II but with some improvement for the function
your own voice.
It's still Sony, who has the best noise reduction.

Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Hamit
Campos
Sendt: 19. januar 2021 22:13
Til: all-audio@groups.io
Emne: Re: [all-audio] Bose 700

By the way how do they sound?

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Anders
Holmberg
Sent: Tuesday, January 19, 2021 2:29 PM
To: all-audio@groups.io
Subject: [all-audio] Bose 700

H i!
Is anyone using the Bose 700 here?
I am just wondering how it works with the touch gestures?
I suppose they will work for a blind person as there are no display
on the headphones.
/A


























221 - 240 of 4015