Date   

Maybe for this group or if not...where

Morey Worthington
 

Evening all.

This is a audio related  question, but has to do with a certain radio station and a  wireless cell phone.


I live North of Chicago Il.  and listen to a ceertain powerful all news station on AM (WBBM 780). We have a phone answering system with 3 wireless headsets.

If If I am listening to the Chicago station and the phone starts ringing, usually for the wife, a loud whisteling noise happens and stays there till the call is finished. This only happens on this one station . I have tried unplugging radio, the phone system, but no change. If I change the radio station to another, all is well. I have tried moving the direction of radio, it is a digital one, with nothing any different.

I am really sorry to ask this group about my issue, but it is audio related. If not for this group, can someone , maybe, give me direction on where to turn??

Thanks,

Morey Worthington


Re: a couple of questions re at8022 and at4022

Hamit Campos
 

It's not much different. The impedance drops to 250 I think it is maybe the self noise drops a bit and yes the most notable thing will be that on battery it can only take 120 DB SPL  but on phantom it'll take 8 DB more. Not impressive but there it is. The quality goes up a bit too. With phantom it sounds a bit more like the AT-4021 it's based on. Neal had said he had made a menu tree for the H6 but I don't know what happened to it. neal.ewers@ravenswood.org is the email to try.

On 7/30/2020 8:20 PM, frank cuta wrote:
I believe these warnings are to prevent damage that might occur by plugging
the 8022 in while the power is on. This is the case for any condenser. My
guess is that it works fine on phantom power without the battery and in fact
if you look closely at the spec sheet there may be a separate set of specs
for phantom power operation and they may be augmented.


Speaking of the H6 I would greatly appreciate it if someone could send us
their notes on how to make various changes in the menu based parameters.
There is a lot that can be accomplished by just counding the number of
clicks and its crazy that each of us with an H6 has to figure it out
independently with sighted help and make our own notes.

Thanks
Frank



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Hamit
Campos
Sent: Thursday, July 30, 2020 6:48 AM
To: all-audio@groups.io
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hi Andy and Gena. Just to clarify a few things. Andy the 4022 is a
completely different mike from the 2 we're discussing here. I'm sure you
ment 2022 and typed 4 by axident. But the 4022 is the omni brother of
the 4021 which is what the 8022 is based on. Now to the subject at hand.
Yes the 2022 is battery operated only thus phantum indeed could damage
it. As for the AT-8022 it came with a double A I'm sure Andy. You don't
necessarily need phantom for the 8022 if you didn't want it. Sure if you
are using it with XLRs it's best to do so to get the full beniphat of
the mic. But also this mic comes with a mini XLR to 3.5 jack cable. This
Andy is so you could use it with the DS-50 or something like that. But
it is mainly for using the 8022 with a camera. You can mount the 8022 on
a DSLR camera. As you can the H6. There ya go just wanted to clear
things up. Andy just sent you a seperate message on how to turn phantom
on and how to link the tracks. Note the XLRs that go into the H6 are
different collors. Have your wife figure out which collor is which
channal. I forget right now. I will say this though left goes towards
the front of the H6 meaning in the XLR near where you snap on the snap
off mics and in this case the right goes into the XLR near the menu
levor. Just so as you know same applys to the left XLRs. Track 1 left
channal is the XLR near the opening for the snap offs and the XLR near
in that case to the card reader is Track 2 or right channal. I'd really
love to hear the 8022 on the F8N though to see what it sounds like on
truely pro gear.

On 7/30/2020 8:58 AM, Andy via groups.io wrote:
Hi again Gena.

Yes Gena.

I've bought a pair of at 8022's and an AT 2022.

Incidentally, a Youtube demo warns that never should the AT2022 be
plugged into an XLr with Phantom turned on or the mic will be killed.
The 2022 has it's own power in the form of a 1.5 Duracell battery.

The AT 8022 does require Phantom so these XLR's should be supplied
with power., but how much power?

Very best wishes.

Andy.


----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 1:08 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hello Andy,

Yes, they are indeed condenser mics so need power. Did you say you got
new ones?

Regards,

Gena
On 30 Jul 2020, at 10:32, Andy via groups.io
<meikle.aiden=btinternet.com@groups.io> wrote:

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and  the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed
apart in an x y form will give me a broader stereo field rather then
1 microphone.

I decided this because when recording my local  7 piece  band the
sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for
these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as
I'm intending to allocate these channels to my new at 2022, which
should arrive next week

These will satisfy  my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've
sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be
nice for an idiots guide because she has absolutely no interest in
recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS










-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4855 / Virus Database: 4793/15883 - Release Date: 08/14/18
Internal Virus Database is out of date.



Re: a couple of questions re at8022 and at4022

frank cuta
 

I believe these warnings are to prevent damage that might occur by plugging
the 8022 in while the power is on. This is the case for any condenser. My
guess is that it works fine on phantom power without the battery and in fact
if you look closely at the spec sheet there may be a separate set of specs
for phantom power operation and they may be augmented.


Speaking of the H6 I would greatly appreciate it if someone could send us
their notes on how to make various changes in the menu based parameters.
There is a lot that can be accomplished by just counding the number of
clicks and its crazy that each of us with an H6 has to figure it out
independently with sighted help and make our own notes.

Thanks
Frank

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Hamit
Campos
Sent: Thursday, July 30, 2020 6:48 AM
To: all-audio@groups.io
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hi Andy and Gena. Just to clarify a few things. Andy the 4022 is a
completely different mike from the 2 we're discussing here. I'm sure you
ment 2022 and typed 4 by axident. But the 4022 is the omni brother of
the 4021 which is what the 8022 is based on. Now to the subject at hand.
Yes the 2022 is battery operated only thus phantum indeed could damage
it. As for the AT-8022 it came with a double A I'm sure Andy. You don't
necessarily need phantom for the 8022 if you didn't want it. Sure if you
are using it with XLRs it's best to do so to get the full beniphat of
the mic. But also this mic comes with a mini XLR to 3.5 jack cable. This
Andy is so you could use it with the DS-50 or something like that. But
it is mainly for using the 8022 with a camera. You can mount the 8022 on
a DSLR camera. As you can the H6. There ya go just wanted to clear
things up. Andy just sent you a seperate message on how to turn phantom
on and how to link the tracks. Note the XLRs that go into the H6 are
different collors. Have your wife figure out which collor is which
channal. I forget right now. I will say this though left goes towards
the front of the H6 meaning in the XLR near where you snap on the snap
off mics and in this case the right goes into the XLR near the menu
levor. Just so as you know same applys to the left XLRs. Track 1 left
channal is the XLR near the opening for the snap offs and the XLR near
in that case to the card reader is Track 2 or right channal. I'd really
love to hear the 8022 on the F8N though to see what it sounds like on
truely pro gear.

On 7/30/2020 8:58 AM, Andy via groups.io wrote:
Hi again Gena.

Yes Gena.

I've bought a pair of at 8022's and an AT 2022.

Incidentally, a Youtube demo warns that never should the AT2022 be
plugged into an XLr with Phantom turned on or the mic will be killed. 
The 2022 has it's own power in the form of a 1.5 Duracell battery.

The AT 8022 does require Phantom so these XLR's should be supplied
with power., but how much power?

Very best wishes.

Andy.


----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 1:08 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hello Andy,

Yes, they are indeed condenser mics so need power. Did you say you got
new ones?

Regards,

Gena
On 30 Jul 2020, at 10:32, Andy via groups.io
<meikle.aiden=btinternet.com@groups.io> wrote:

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and  the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed 
apart in an x y form will give me a broader stereo field rather then
1 microphone.

I decided this because when recording my local  7 piece  band the
sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for
these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as
I'm intending to allocate these channels to my new at 2022, which
should arrive next week

These will satisfy  my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've
sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be
nice for an idiots guide because she has absolutely no interest in
recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS











-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4855 / Virus Database: 4793/15883 - Release Date: 08/14/18
Internal Virus Database is out of date.


Re: a couple of questions re at8022 and at4022

Hamit Campos
 

Sure thing. You could though I don't do this much connect the 8022 to the H6 with the XY snap off peace on and into the mini jack on that. You'll see because of the dip between the H6 the snap off front and the right arm onto which the right mic is mounted for the H6 why I don't do this much. Now I don't know how that front peace looks on the F8N but who knows maybe it's better there.

On 7/30/2020 6:40 PM, Andy via groups.io wrote:
Hi again Hamit and Gena.

Yes Hamit it was an error on my point.

I did mean the AT2022 and I'm hoping to receive that next week.

As for the AT8022.  I take your point in setting up Phantom, but I could use them to check them out using their own internal batteries.

I also like your suggestion, that in the meantime, I could use the mini jack with the 8022 and try plugging this into my very little DS50.  Now I think this will lead to surprising results.  I'll let you know the outcome.

Very best wishes.

Andy.


----- Original Message ----- From: "Hamit Campos" <hamitcampos@gmail.com>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 2:48 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hi Andy and Gena. Just to clarify a few things. Andy the 4022 is a completely different mike from the 2 we're discussing here. I'm sure you ment 2022 and typed 4 by axident. But the 4022 is the omni brother of the 4021 which is what the 8022 is based on. Now to the subject at hand. Yes the 2022 is battery operated only thus phantum indeed could damage it. As for the AT-8022 it came with a double A I'm sure Andy. You don't necessarily need phantom for the 8022 if you didn't want it. Sure if you are using it with XLRs it's best to do so to get the full beniphat of the mic. But also this mic comes with a mini XLR to 3.5 jack cable. This Andy is so you could use it with the DS-50 or something like that. But it is mainly for using the 8022 with a camera. You can mount the 8022 on a DSLR camera. As you can the H6. There ya go just wanted to clear things up. Andy just sent you a seperate message on how to turn phantom on and how to link the tracks. Note the XLRs that go into the H6 are different collors. Have your wife figure out which collor is which channal. I forget right now. I will say this though left goes towards the front of the H6 meaning in the XLR near where you snap on the snap off mics and in this case the right goes into the XLR near the menu levor. Just so as you know same applys to the left XLRs. Track 1 left channal is the XLR near the opening for the snap offs and the XLR near in that case to the card reader is Track 2 or right channal. I'd really love to hear the 8022 on the F8N though to see what it sounds like on truely pro gear.

On 7/30/2020 8:58 AM, Andy via groups.io wrote:
Hi again Gena.

Yes Gena.

I've bought a pair of at 8022's and an AT 2022.

Incidentally, a Youtube demo warns that never should the AT2022 be plugged into an XLr with Phantom turned on or the mic will be killed. The 2022 has it's own power in the form of a 1.5 Duracell battery.

The AT 8022 does require Phantom so these XLR's should be supplied with power., but how much power?

Very best wishes.

Andy.


----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 1:08 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hello Andy,

Yes, they are indeed condenser mics so need power. Did you say you got new ones?

Regards,

Gena
On 30 Jul 2020, at 10:32, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed apart in an x y form will give me a broader stereo field rather then 1 microphone.

I decided this because when recording my local 7 piece band the sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as I'm intending to allocate these channels to my new at 2022, which should arrive next week

These will satisfy my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be nice for an idiots guide because she has absolutely no interest in recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS









Re: a couple of questions re at8022 and at4022

Andy
 

Hi again Hamit and Gena.

Yes Hamit it was an error on my point.

I did mean the AT2022 and I'm hoping to receive that next week.

As for the AT8022. I take your point in setting up Phantom, but I could use them to check them out using their own internal batteries.

I also like your suggestion, that in the meantime, I could use the mini jack with the 8022 and try plugging this into my very little DS50. Now I think this will lead to surprising results. I'll let you know the outcome.

Very best wishes.

Andy.

----- Original Message -----
From: "Hamit Campos" <hamitcampos@gmail.com>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 2:48 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hi Andy and Gena. Just to clarify a few things. Andy the 4022 is a completely different mike from the 2 we're discussing here. I'm sure you ment 2022 and typed 4 by axident. But the 4022 is the omni brother of the 4021 which is what the 8022 is based on. Now to the subject at hand. Yes the 2022 is battery operated only thus phantum indeed could damage it. As for the AT-8022 it came with a double A I'm sure Andy. You don't necessarily need phantom for the 8022 if you didn't want it. Sure if you are using it with XLRs it's best to do so to get the full beniphat of the mic. But also this mic comes with a mini XLR to 3.5 jack cable. This Andy is so you could use it with the DS-50 or something like that. But it is mainly for using the 8022 with a camera. You can mount the 8022 on a DSLR camera. As you can the H6. There ya go just wanted to clear things up. Andy just sent you a seperate message on how to turn phantom on and how to link the tracks. Note the XLRs that go into the H6 are different collors. Have your wife figure out which collor is which channal. I forget right now. I will say this though left goes towards the front of the H6 meaning in the XLR near where you snap on the snap off mics and in this case the right goes into the XLR near the menu levor. Just so as you know same applys to the left XLRs. Track 1 left channal is the XLR near the opening for the snap offs and the XLR near in that case to the card reader is Track 2 or right channal. I'd really love to hear the 8022 on the F8N though to see what it sounds like on truely pro gear.

On 7/30/2020 8:58 AM, Andy via groups.io wrote:
Hi again Gena.

Yes Gena.

I've bought a pair of at 8022's and an AT 2022.

Incidentally, a Youtube demo warns that never should the AT2022 be plugged into an XLr with Phantom turned on or the mic will be killed. The 2022 has it's own power in the form of a 1.5 Duracell battery.

The AT 8022 does require Phantom so these XLR's should be supplied with power., but how much power?

Very best wishes.

Andy.


----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 1:08 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hello Andy,

Yes, they are indeed condenser mics so need power. Did you say you got new ones?

Regards,

Gena
On 30 Jul 2020, at 10:32, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed apart in an x y form will give me a broader stereo field rather then 1 microphone.

I decided this because when recording my local 7 piece band the sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as I'm intending to allocate these channels to my new at 2022, which should arrive next week

These will satisfy my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be nice for an idiots guide because she has absolutely no interest in recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS







Re: CDEx storage folder

Barry Chapman
 

Hi Howard,

When in CDEX, press f4 and arrow up or down to Directories & files. Tab through the options, one of which is to where ripped files are written. You can change this to a different location if you wish. By default, they are in the CDEX folder in either Program Files Or Program Files (x86).

Regards,
Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Friday, 31 July 2020 5:03 AM
To: all-audio@groups.io
Subject: [all-audio] CDEx storage folder

Hi all. Anyone using CDEx, how can I find out where CDEx saves its
ripped files?

Thanks.
Howard


CDEx storage folder

Howard Traxler
 

Hi all.  Anyone using CDEx, how can I find out where CDEx saves its ripped files?

Thanks.
Howard


Re: a couple of questions re at8022 and at4022

Hamit Campos
 

Hi Andy and Gena. Just to clarify a few things. Andy the 4022 is a completely different mike from the 2 we're discussing here. I'm sure you ment 2022 and typed 4 by axident. But the 4022 is the omni brother of the 4021 which is what the 8022 is based on. Now to the subject at hand. Yes the 2022 is battery operated only thus phantum indeed could damage it. As for the AT-8022 it came with a double A I'm sure Andy. You don't necessarily need phantom for the 8022 if you didn't want it. Sure if you are using it with XLRs it's best to do so to get the full beniphat of the mic. But also this mic comes with a mini XLR to 3.5 jack cable. This Andy is so you could use it with the DS-50 or something like that. But it is mainly for using the 8022 with a camera. You can mount the 8022 on a DSLR camera. As you can the H6. There ya go just wanted to clear things up. Andy just sent you a seperate message on how to turn phantom on and how to link the tracks. Note the XLRs that go into the H6 are different collors. Have your wife figure out which collor is which channal. I forget right now. I will say this though left goes towards the front of the H6 meaning in the XLR near where you snap on the snap off mics and in this case the right goes into the XLR near the menu levor. Just so as you know same applys to the left XLRs. Track 1 left channal is the XLR near the opening for the snap offs and the XLR near in that case to the card reader is Track 2 or right channal. I'd really love to hear the 8022 on the F8N though to see what it sounds like on truely pro gear.

On 7/30/2020 8:58 AM, Andy via groups.io wrote:
Hi again Gena.

Yes Gena.

I've bought a pair of at 8022's and an AT 2022.

Incidentally, a Youtube demo warns that never should the AT2022 be plugged into an XLr with Phantom turned on or the mic will be killed.  The 2022 has it's own power in the form of a 1.5 Duracell battery.

The AT 8022 does require Phantom so these XLR's should be supplied with power., but how much power?

Very best wishes.

Andy.


----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 1:08 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hello Andy,

Yes, they are indeed condenser mics so need power. Did you say you got new ones?

Regards,

Gena
On 30 Jul 2020, at 10:32, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and  the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed  apart in an x y form will give me a broader stereo field rather then 1 microphone.

I decided this because when recording my local  7 piece  band the sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as I'm intending to allocate these channels to my new at 2022, which should arrive next week

These will satisfy  my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be nice for an idiots guide because she has absolutely no interest in recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS







Re: a couple of questions re at8022 and at4022

Andy
 

Hi again Gena.

Yes Gena.

I've bought a pair of at 8022's and an AT 2022.

Incidentally, a Youtube demo warns that never should the AT2022 be plugged into an XLr with Phantom turned on or the mic will be killed. The 2022 has it's own power in the form of a 1.5 Duracell battery.

The AT 8022 does require Phantom so these XLR's should be supplied with power., but how much power?

Very best wishes.

Andy.

----- Original Message -----
From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 1:08 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hello Andy,

Yes, they are indeed condenser mics so need power. Did you say you got new ones?

Regards,

Gena
On 30 Jul 2020, at 10:32, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed apart in an x y form will give me a broader stereo field rather then 1 microphone.

I decided this because when recording my local 7 piece band the sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as I'm intending to allocate these channels to my new at 2022, which should arrive next week

These will satisfy my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be nice for an idiots guide because she has absolutely no interest in recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: a couple of questions re at8022 and at4022

Georgina Joyce
 

Hello Andy,

Yes, they are indeed condenser mics so need power. Did you say you got new ones?

Regards,

Gena
On 30 Jul 2020, at 10:32, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed apart in an x y form will give me a broader stereo field rather then 1 microphone.

I decided this because when recording my local 7 piece band the sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as I'm intending to allocate these channels to my new at 2022, which should arrive next week

These will satisfy my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be nice for an idiots guide because she has absolutely no interest in recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


a couple of questions re at8022 and at4022

Andy
 

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed apart in an x y form will give me a broader stereo field rather then 1 microphone.

I decided this because when recording my local 7 piece band the sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as I'm intending to allocate these channels to my new at 2022, which should arrive next week

These will satisfy my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be nice for an idiots guide because she has absolutely no interest in recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Re: the Focusrite Scarlett 2i2

Georgina Joyce
 

Hello Christopher,

Not sure to which generation you refer. Someone reported that the new 3rd generation had changed with software replacing physical controls. However, I do not know if this applies to the 2 i 2.

What I can tell you is that the 2 i 2 2nd Generation is accessible. The gain knobs are physical controls. They have a little notch so you can feel their positions. I understand that there are indeed pretty LED lights that visually show something but as I can't see it doesn't bother me.

Be sure you know what generation you are thinking of buying. The 3rd generation maybe the same as the second and it is just the larger 4 i 2 etc that has replaced the knobs for software.

The manuals are readily available so grab one and read up on each unit.

HTH
On 10 Jul 2020, at 20:39, Christopher Wright <chris@wright-media.com> wrote:

Hi,

It's my understand that the Focusrite Scarlett 2i2 uses colors to help people judge their audio levels. What does this mean for someone who has no eyesight?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


the Focusrite Scarlett 2i2

Christopher Wright
 

Hi,

It's my understand that the Focusrite Scarlett 2i2 uses colors to help people judge their audio levels. What does this mean for someone who has no eyesight?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com


Re: mp3 direct cut, setting cue points?

john s
 

Kelly, load your file, go to the special menu and choose pause detection and press enter. You may hear progress beeps has the program works. You can check near the bottom of the window and see how many pauses the program found. Th3en, go the file menu and save splits.

At 01:30 PM 7/10/2020, Kelly Pierce, wrote:
I’m glad to know the functionality is available for free in MP3 DC. I
have not used the pause detection feature. I use the program to clip
portions of spoken word MP3 files for archiving or for music files to
make ringtones.

Kelly
I’m glad to know the functionality is available for free in MP3 DC. I
have not used the pause detection feature. I use the program to clip
portions of spoken word MP3 files for archiving or for music files to
make ringtones.

Kelly


On 7/10/20, Joe Paton <joe@vi-ability.org.uk> wrote:
there is a programme called music tag.
Can't tell you how accessible it is though.




John


Re: mp3 direct cut, setting cue points?

Kelly Pierce
 

I’m glad to know the functionality is available for free in MP3 DC. I
have not used the pause detection feature. I use the program to clip
portions of spoken word MP3 files for archiving or for music files to
make ringtones.

Kelly
I’m glad to know the functionality is available for free in MP3 DC. I
have not used the pause detection feature. I use the program to clip
portions of spoken word MP3 files for archiving or for music files to
make ringtones.

Kelly

On 7/10/20, Joe Paton <joe@vi-ability.org.uk> wrote:
there is a programme called music tag.
Can't tell you how accessible it is though.





Re: mp3 direct cut, setting cue points?

Joe Paton
 

there is a programme called music tag.
Can't tell you how accessible it is though.


Re: mp3 direct cut, setting cue points?

john s
 

Kelly, cue points can be set but it sounds complicated. Pauses can be detected with the pause detection function and when there are pauses. it works well.

At 01:33 PM 7/9/2020, Kelly Pierce, wrote:
regarding those cue points, MP3 DC only creates them automatically for
equal time intervals, such as creating hour long cue points in a
radio program. it does not check for silence between songs like in
Sound forge and make cue points.


Kelly



On 7/9/20, stewartross via groups.io <stewartross=sky.com@groups.io> wrote:
can someone tell me what is the best software to use for opening flac files

and edditing them?
also i don't want to loose any quality.
from stewart
----- Original Message -----
From: "john s" <jschwery@centurylink.net>
To: <all-audio@groups.io>
Sent: Thursday, July 09, 2020 1:50 PM
Subject: Re: [all-audio] mp3 direct cut, setting cue points?


Kelly, I was hoping to set cue points between the songs of an album and
save the splits all at once. When the pause function works, it works
well. I know how to make selections. I was hoping for a shortcut.

At 10:17 PM 7/8/2020, Kelly Pierce, wrote:
Are you trying to make a selection? Begin selection is control B and
end selection is control N. What are you trying to accomplish?

Kelly

On 7/8/20, john s <jschwery@centurylink.net> wrote:
Does anyone know how to set cue points in mp3 direct cut using
keystrokes?


John




John






John


Re: mp3 direct cut, setting cue points?

Kelly Pierce
 

regarding those cue points, MP3 DC only creates them automatically for
equal time intervals, such as creating hour long cue points in a
radio program. it does not check for silence between songs like in
Sound forge and make cue points.


Kelly

On 7/9/20, stewartross via groups.io <stewartross=sky.com@groups.io> wrote:
can someone tell me what is the best software to use for opening flac files

and edditing them?
also i don't want to loose any quality.
from stewart
----- Original Message -----
From: "john s" <jschwery@centurylink.net>
To: <all-audio@groups.io>
Sent: Thursday, July 09, 2020 1:50 PM
Subject: Re: [all-audio] mp3 direct cut, setting cue points?


Kelly, I was hoping to set cue points between the songs of an album and
save the splits all at once. When the pause function works, it works
well. I know how to make selections. I was hoping for a shortcut.

At 10:17 PM 7/8/2020, Kelly Pierce, wrote:
Are you trying to make a selection? Begin selection is control B and
end selection is control N. What are you trying to accomplish?

Kelly

On 7/8/20, john s <jschwery@centurylink.net> wrote:
Does anyone know how to set cue points in mp3 direct cut using
keystrokes?


John




John







Re: mp3 direct cut, setting cue points?

stewartross
 

can someone tell me what is the best software to use for opening flac files and edditing them?
also i don't want to loose any quality.
from stewart

----- Original Message -----
From: "john s" <jschwery@centurylink.net>
To: <all-audio@groups.io>
Sent: Thursday, July 09, 2020 1:50 PM
Subject: Re: [all-audio] mp3 direct cut, setting cue points?


Kelly, I was hoping to set cue points between the songs of an album and save the splits all at once. When the pause function works, it works well. I know how to make selections. I was hoping for a shortcut.

At 10:17 PM 7/8/2020, Kelly Pierce, wrote:
Are you trying to make a selection? Begin selection is control B and
end selection is control N. What are you trying to accomplish?

Kelly

On 7/8/20, john s <jschwery@centurylink.net> wrote:
Does anyone know how to set cue points in mp3 direct cut using keystrokes?


John




John



Re: mp3 direct cut, setting cue points?

john s
 

Kelly, I was hoping to set cue points between the songs of an album and save the splits all at once. When the pause function works, it works well. I know how to make selections. I was hoping for a shortcut.

At 10:17 PM 7/8/2020, Kelly Pierce, wrote:
Are you trying to make a selection? Begin selection is control B and
end selection is control N. What are you trying to accomplish?

Kelly

On 7/8/20, john s <jschwery@centurylink.net> wrote:
Does anyone know how to set cue points in mp3 direct cut using keystrokes?


John




John

421 - 440 of 3919