Date   

Re: tape deck

goshawk on horseback
 

my teac one was also a heavy beast.

Simon

----- Original Message -----
From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Tuesday, June 16, 2020 12:39 AM
Subject: Re: [all-audio] tape deck


hi simon
i bet u can moniter the recordings on the record head, and u can alter the heads
on my machine mine is done by the use of a trimming tool
its a heavy monster
ill dig out the details.
from stewart

----- Original Message -----
From: "goshawk on horseback" <goshawk_on_horseback@fastmail.co.uk>
To: <all-audio@groups.io>
Sent: Tuesday, June 16, 2020 12:33 AM
Subject: Re: [all-audio] tape deck


personally, I like the aphex in2:
http://www.aphex.com/products/in2
as it has individual level controls on each channel, plus a rather useful optical compressor, which comes in handy if you have to crank things up a bit for some quieter parts of a recording, but don't want to over do things on the louder parts.
as far as tape decks go, I personally use a marantz cp430, as it has the biost adjustment, and is a 3head machine. plus as a portable machine, it doesn't take up a lot of space when being used, and can easily be stored away, when not in use.
when I had my full studio, I did used to have a really super teac deck, which had just about any sort of adjustment one could think of, plus a wired remote. it could also work at double the normal tape speed, for making better quality recordings. but unfortunately I didn't keep a record of it's model number.

Simon


----- Original Message -----
From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Tuesday, June 16, 2020 12:09 AM
Subject: Re: [all-audio] tape deck


Could this be accomplished with an audio interface? If so, which one would you recommend? Also, which tape deck would you recommend?





On 6/15/2020 7:02 PM, goshawk on horseback wrote:
I would agree with the below.
as whilst yes there are tape machines with USB connections, from those I have seen, the actual decks do tend to be of rather poor quality.

Simon


----- Original Message ----- From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:30 PM
Subject: Re: [all-audio] tape deck


hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart


----- Original Message ----- From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com






--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia







Re: tape deck

stewartross
 

hi simon
i bet u can moniter the recordings on the record head, and u can alter the heads
on my machine mine is done by the use of a trimming tool
its a heavy monster
ill dig out the details.
from stewart

----- Original Message -----
From: "goshawk on horseback" <goshawk_on_horseback@fastmail.co.uk>
To: <all-audio@groups.io>
Sent: Tuesday, June 16, 2020 12:33 AM
Subject: Re: [all-audio] tape deck


personally, I like the aphex in2:
http://www.aphex.com/products/in2
as it has individual level controls on each channel, plus a rather useful optical compressor, which comes in handy if you have to crank things up a bit for some quieter parts of a recording, but don't want to over do things on the louder parts.
as far as tape decks go, I personally use a marantz cp430, as it has the biost adjustment, and is a 3head machine. plus as a portable machine, it doesn't take up a lot of space when being used, and can easily be stored away, when not in use.
when I had my full studio, I did used to have a really super teac deck, which had just about any sort of adjustment one could think of, plus a wired remote. it could also work at double the normal tape speed, for making better quality recordings. but unfortunately I didn't keep a record of it's model number.

Simon


----- Original Message -----
From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Tuesday, June 16, 2020 12:09 AM
Subject: Re: [all-audio] tape deck


Could this be accomplished with an audio interface? If so, which one would you recommend? Also, which tape deck would you recommend?





On 6/15/2020 7:02 PM, goshawk on horseback wrote:
I would agree with the below.
as whilst yes there are tape machines with USB connections, from those I have seen, the actual decks do tend to be of rather poor quality.

Simon


----- Original Message ----- From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:30 PM
Subject: Re: [all-audio] tape deck


hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart


----- Original Message ----- From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com






--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia





Re: tape deck

goshawk on horseback
 

personally, I like the aphex in2:
http://www.aphex.com/products/in2
as it has individual level controls on each channel, plus a rather useful optical compressor, which comes in handy if you have to crank things up a bit for some quieter parts of a recording, but don't want to over do things on the louder parts.
as far as tape decks go, I personally use a marantz cp430, as it has the biost adjustment, and is a 3head machine. plus as a portable machine, it doesn't take up a lot of space when being used, and can easily be stored away, when not in use.
when I had my full studio, I did used to have a really super teac deck, which had just about any sort of adjustment one could think of, plus a wired remote. it could also work at double the normal tape speed, for making better quality recordings. but unfortunately I didn't keep a record of it's model number.

Simon

----- Original Message -----
From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Tuesday, June 16, 2020 12:09 AM
Subject: Re: [all-audio] tape deck


Could this be accomplished with an audio interface? If so, which one would you recommend? Also, which tape deck would you recommend?





On 6/15/2020 7:02 PM, goshawk on horseback wrote:
I would agree with the below.
as whilst yes there are tape machines with USB connections, from those I have seen, the actual decks do tend to be of rather poor quality.

Simon


----- Original Message ----- From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:30 PM
Subject: Re: [all-audio] tape deck


hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart


----- Original Message ----- From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com






--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia



Re: tape deck

stewartross
 

yep i agree
take for example i have an fm tuner thats made by revox.
and it can go up in steps of 10 kc's.
the make and the model of it is
Revox B260
if u want to read up aboute it.

----- Original Message -----
From: "Byron Stephens" <bstephens122874@shaw.ca>
To: <all-audio@groups.io>
Sent: Tuesday, June 16, 2020 12:11 AM
Subject: Re: [all-audio] tape deck


Personally I would never get one of those decks that have USB. The vintage decks have much better quality.
----- Original Message -----
From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 4:09 PM
Subject: Re: [all-audio] tape deck


Could this be accomplished with an audio interface? If so, which one would you recommend? Also, which tape deck would you recommend?





On 6/15/2020 7:02 PM, goshawk on horseback wrote:
I would agree with the below.
as whilst yes there are tape machines with USB connections, from those I have seen, the actual decks do tend to be of rather poor quality.

Simon


----- Original Message ----- From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:30 PM
Subject: Re: [all-audio] tape deck


hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart


----- Original Message ----- From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com






--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia





Re: tape deck

stewartross
 

hi there to all on the list
hope your keeping well
ill dig out the make and the model of my machine i managed to get it from ebay for £100
but wen it was made in the late seventies /early 80s
think it was £1000
i can tell u that this machine has 3 heads on it and u can adjust the play and records on all the play and rcord heads
and adjust the byust for wen u r using different makes and types of tapes.
from stew

----- Original Message -----
From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Tuesday, June 16, 2020 12:09 AM
Subject: Re: [all-audio] tape deck


Could this be accomplished with an audio interface? If so, which one would you recommend? Also, which tape deck would you recommend?





On 6/15/2020 7:02 PM, goshawk on horseback wrote:
I would agree with the below.
as whilst yes there are tape machines with USB connections, from those I have seen, the actual decks do tend to be of rather poor quality.

Simon


----- Original Message ----- From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:30 PM
Subject: Re: [all-audio] tape deck


hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart


----- Original Message ----- From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com






--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia



Re: tape deck

Byron Stephens
 

Personally I would never get one of those decks that have USB. The vintage decks have much better quality.

----- Original Message -----
From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 4:09 PM
Subject: Re: [all-audio] tape deck


Could this be accomplished with an audio interface? If so, which one would you recommend? Also, which tape deck would you recommend?





On 6/15/2020 7:02 PM, goshawk on horseback wrote:
I would agree with the below.
as whilst yes there are tape machines with USB connections, from those I have seen, the actual decks do tend to be of rather poor quality.

Simon


----- Original Message ----- From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:30 PM
Subject: Re: [all-audio] tape deck


hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart


----- Original Message ----- From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com






--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia



Re: tape deck

Christopher Wright
 

Could this be accomplished with an audio interface? If so, which one would you recommend? Also, which tape deck would you recommend?

On 6/15/2020 7:02 PM, goshawk on horseback wrote:
I would agree with the below.
as whilst yes there are tape machines with USB connections, from those I have seen, the actual decks do tend to be of rather poor quality.

Simon


----- Original Message ----- From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:30 PM
Subject: Re: [all-audio] tape deck


hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart


----- Original Message ----- From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com






--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


Re: tape deck

goshawk on horseback
 

I would agree with the below.
as whilst yes there are tape machines with USB connections, from those I have seen, the actual decks do tend to be of rather poor quality.

Simon

----- Original Message -----
From: "stewartross via groups.io" <stewartross=sky.com@groups.io>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:30 PM
Subject: Re: [all-audio] tape deck


hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart


----- Original Message -----
From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com





Re: tape deck

stewartross
 

hi there if u want to transfer your tapes on to your pc
i would invest if u can in a good quality tape machine
that has controls for alining the play and record heads,
as different tapes r recorded with different head positions.
if your soundcard has a 3.5 jack socket,
then plug a mixer in to the line in socket,
and plug your tape machine in to one of your faiders,/line ins on the mixer.
hope this helps.
from stewart

----- Original Message -----
From: "Christopher Wright" <chris@wright-media.com>
To: <all-audio@groups.io>
Sent: Monday, June 15, 2020 10:15 PM
Subject: [all-audio] tape deck


Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com



tape deck

Christopher Wright
 

Hi,

Is there such thing as a tape deck that can be connected to a computer through USB?

--




Christopher Wright - helping podcasters, trainers, and speakers produce and publish great spoken word audio without spending hours on editing
Phone: 914-664-5014 [If I don't respond within thirty seconds, you can leave a voicemail. If you would like to speak with me, please request an appointment]
email: chris@wright-media.com
web site: www.wright-media.com
Twitter: @chrisw1
Skype: wrightmedia1
Linked In profile: http://www.linkedin.com/in/wrightmedia


--
This email has been checked for viruses by AVG.
https://www.avg.com


Re: Line-in Jack on Zoom F6?

Hamit Campos
 

You’re welcome Jerry. So gelous. I’d love an F6 for it’s sound quality and the 32 bits float. Don’t get me wrong. I love my H6. It’s just the F6 sound is that much closer to a Sound-Devices. With those I always wanted a 744-T like Neal Ewers has.

On Jun 14, 2020, at 5:21 PM, Jerry Berrier <jlblists@gmail.com> wrote:

Ah, okay. That answers my questions.
Thanks.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Hamit Campos
Sent: Sunday, June 14, 2020 4:24 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Line-in Jack on Zoom F6?

Hi Jerry and Andy. Well let’s be clear which recorder we’re talking about here. Jerry Andy is talking about the XY H6 snap off front with 2 mic capsels setup in XY. But if you ordered an F6 forget it. It’s all XLR there friend. The F6 doesn’t even have the empty part to snap on things like the XY H6. Oh yeah there’s no quarter intch jacks either.
On Jun 14, 2020, at 4:18 PM, Jerry Berrier <jlblists@gmail.com> wrote:

Andy,

Wow, I have no idea what the clip in microphone XY, Is.
Is that an adapter you order to use with the F6?
I have not yet received my F6, but from what I've read so far, it
seems that it does not have a line-in jack.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Andy via
groups.io
Sent: Sunday, June 14, 2020 3:45 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Line-in Jack on Zoom F6?

Hi Gerry.

If you have the clip in microphone XY, you will see a little socket for a
line in plug and you can control the volume coming in with the knob on
the Plug in.

This will not supply Phantom Power however, so you'd need a very small
external power pack just for the line in power, Not much about a pp9
battery.

But my H6 and my F8N have the facility for making all of my XLR
connections
- XLR or Line in.

, but you will need an XLR adaptor to cope with the line in connection.

If it's only one line in channel you can simply put up with the small
power demand or plug your H6 into a wall socket.

These are only my basic thoughts so I'd highly recommend that you speak
with Gena or Hamit.


Andy.




----- Original Message -----
From: "Jerry Berrier" <jlblists@gmail.com>
To: <all-audio@groups.io>
Sent: Sunday, June 14, 2020 7:59 PM
Subject: [all-audio] Line-in Jack on Zoom F6?


Hi Can somebody tell me if there's a 3.5mm line-in jack on the Zoom F6?

The Mosen at large podcast from Gary mentioned a line-out, but not a
line-in. I'm hoping he had it backward.



Thanks.

















Re: Line-in Jack on Zoom F6?

Jerry Berrier
 

Ah, okay. That answers my questions.
Thanks.

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Hamit Campos
Sent: Sunday, June 14, 2020 4:24 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Line-in Jack on Zoom F6?

Hi Jerry and Andy. Well let’s be clear which recorder we’re talking about here. Jerry Andy is talking about the XY H6 snap off front with 2 mic capsels setup in XY. But if you ordered an F6 forget it. It’s all XLR there friend. The F6 doesn’t even have the empty part to snap on things like the XY H6. Oh yeah there’s no quarter intch jacks either.
On Jun 14, 2020, at 4:18 PM, Jerry Berrier <jlblists@gmail.com> wrote:

Andy,

Wow, I have no idea what the clip in microphone XY, Is.
Is that an adapter you order to use with the F6?
I have not yet received my F6, but from what I've read so far, it
seems that it does not have a line-in jack.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Andy via
groups.io
Sent: Sunday, June 14, 2020 3:45 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Line-in Jack on Zoom F6?

Hi Gerry.

If you have the clip in microphone XY, you will see a little socket for a
line in plug and you can control the volume coming in with the knob on
the Plug in.

This will not supply Phantom Power however, so you'd need a very small
external power pack just for the line in power, Not much about a pp9
battery.

But my H6 and my F8N have the facility for making all of my XLR
connections
- XLR or Line in.

, but you will need an XLR adaptor to cope with the line in connection.

If it's only one line in channel you can simply put up with the small
power demand or plug your H6 into a wall socket.

These are only my basic thoughts so I'd highly recommend that you speak
with Gena or Hamit.


Andy.




----- Original Message -----
From: "Jerry Berrier" <jlblists@gmail.com>
To: <all-audio@groups.io>
Sent: Sunday, June 14, 2020 7:59 PM
Subject: [all-audio] Line-in Jack on Zoom F6?


Hi Can somebody tell me if there's a 3.5mm line-in jack on the Zoom F6?

The Mosen at large podcast from Gary mentioned a line-out, but not a
line-in. I'm hoping he had it backward.



Thanks.












Re: Line-in Jack on Zoom F6?

Jerry Berrier
 

Just to clarify, I realize you can use xlr jacks for line-in level signals,
but what I'm trying to learn is whether there is a 3.5MM input, either for
line-in or microphone. I have a couple of sets of binaural mics that have a
standard TRS 3.5MM plug, and I'd like to be able to use them with the F6 if
there is a way.

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Jerry Berrier
via groups.io
Sent: Sunday, June 14, 2020 4:18 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Line-in Jack on Zoom F6?

Andy,

Wow, I have no idea what the clip in microphone XY, Is.
Is that an adapter you order to use with the F6?
I have not yet received my F6, but from what I've read so far, it seems that
it does not have a line-in jack.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Andy via
groups.io
Sent: Sunday, June 14, 2020 3:45 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Line-in Jack on Zoom F6?

Hi Gerry.

If you have the clip in microphone XY, you will see a little socket for a
line in plug and you can control the volume coming in with the knob on the
Plug in.

This will not supply Phantom Power however, so you'd need a very small
external power pack just for the line in power, Not much about a pp9
battery.

But my H6 and my F8N have the facility for making all of my XLR connections
- XLR or Line in.

, but you will need an XLR adaptor to cope with the line in connection.

If it's only one line in channel you can simply put up with the small power
demand or plug your H6 into a wall socket.

These are only my basic thoughts so I'd highly recommend that you speak
with Gena or Hamit.


Andy.




----- Original Message -----
From: "Jerry Berrier" <jlblists@gmail.com>
To: <all-audio@groups.io>
Sent: Sunday, June 14, 2020 7:59 PM
Subject: [all-audio] Line-in Jack on Zoom F6?


Hi Can somebody tell me if there's a 3.5mm line-in jack on the Zoom F6?

The Mosen at large podcast from Gary mentioned a line-out, but not a
line-in. I'm hoping he had it backward.



Thanks.






Re: Line-in Jack on Zoom F6?

Hamit Campos
 

Hi Jerry and Andy. Well let’s be clear which recorder we’re talking about here. Jerry Andy is talking about the XY H6 snap off front with 2 mic capsels setup in XY. But if you ordered an F6 forget it. It’s all XLR there friend. The F6 doesn’t even have the empty part to snap on things like the XY H6. Oh yeah there’s no quarter intch jacks either.

On Jun 14, 2020, at 4:18 PM, Jerry Berrier <jlblists@gmail.com> wrote:

Andy,

Wow, I have no idea what the clip in microphone XY, Is.
Is that an adapter you order to use with the F6?
I have not yet received my F6, but from what I've read so far, it seems that
it does not have a line-in jack.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Andy via
groups.io
Sent: Sunday, June 14, 2020 3:45 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Line-in Jack on Zoom F6?

Hi Gerry.

If you have the clip in microphone XY, you will see a little socket for a
line in plug and you can control the volume coming in with the knob on the
Plug in.

This will not supply Phantom Power however, so you'd need a very small
external power pack just for the line in power, Not much about a pp9
battery.

But my H6 and my F8N have the facility for making all of my XLR connections
- XLR or Line in.

, but you will need an XLR adaptor to cope with the line in connection.

If it's only one line in channel you can simply put up with the small power
demand or plug your H6 into a wall socket.

These are only my basic thoughts so I'd highly recommend that you speak
with Gena or Hamit.


Andy.




----- Original Message -----
From: "Jerry Berrier" <jlblists@gmail.com>
To: <all-audio@groups.io>
Sent: Sunday, June 14, 2020 7:59 PM
Subject: [all-audio] Line-in Jack on Zoom F6?


Hi Can somebody tell me if there's a 3.5mm line-in jack on the Zoom F6?

The Mosen at large podcast from Gary mentioned a line-out, but not a
line-in. I'm hoping he had it backward.



Thanks.












Re: Line-in Jack on Zoom F6?

Jerry Berrier
 

Andy,

Wow, I have no idea what the clip in microphone XY, Is.
Is that an adapter you order to use with the F6?
I have not yet received my F6, but from what I've read so far, it seems that
it does not have a line-in jack.

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Andy via
groups.io
Sent: Sunday, June 14, 2020 3:45 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Line-in Jack on Zoom F6?

Hi Gerry.

If you have the clip in microphone XY, you will see a little socket for a
line in plug and you can control the volume coming in with the knob on the
Plug in.

This will not supply Phantom Power however, so you'd need a very small
external power pack just for the line in power, Not much about a pp9
battery.

But my H6 and my F8N have the facility for making all of my XLR connections
- XLR or Line in.

, but you will need an XLR adaptor to cope with the line in connection.

If it's only one line in channel you can simply put up with the small power
demand or plug your H6 into a wall socket.

These are only my basic thoughts so I'd highly recommend that you speak
with Gena or Hamit.


Andy.




----- Original Message -----
From: "Jerry Berrier" <jlblists@gmail.com>
To: <all-audio@groups.io>
Sent: Sunday, June 14, 2020 7:59 PM
Subject: [all-audio] Line-in Jack on Zoom F6?


Hi Can somebody tell me if there's a 3.5mm line-in jack on the Zoom F6?

The Mosen at large podcast from Gary mentioned a line-out, but not a
line-in. I'm hoping he had it backward.



Thanks.






Re: Line-in Jack on Zoom F6?

Andy
 

Hi Gerry.

If you have the clip in microphone XY, you will see a little socket for a line in plug and you can control the volume coming in with the knob on the Plug in.

This will not supply Phantom Power however, so you'd need a very small external power pack just for the line in power, Not much about a pp9 battery.

But my H6 and my F8N have the facility for making all of my XLR connections - XLR or Line in.

, but you will need an XLR adaptor to cope with the line in connection.

If it's only one line in channel you can simply put up with the small power demand or plug your H6 into a wall socket.

These are only my basic thoughts so I'd highly recommend that you speak with Gena or Hamit.


Andy.

----- Original Message -----
From: "Jerry Berrier" <jlblists@gmail.com>
To: <all-audio@groups.io>
Sent: Sunday, June 14, 2020 7:59 PM
Subject: [all-audio] Line-in Jack on Zoom F6?


Hi Can somebody tell me if there's a 3.5mm line-in jack on the Zoom F6?

The Mosen at large podcast from Gary mentioned a line-out, but not a
line-in. I'm hoping he had it backward.



Thanks.





Line-in Jack on Zoom F6?

Jerry Berrier
 

Hi Can somebody tell me if there's a 3.5mm line-in jack on the Zoom F6?

The Mosen at large podcast from Gary mentioned a line-out, but not a
line-in. I'm hoping he had it backward.



Thanks.


DPA Microphones for Sale

Jerry Berrier
 

Hi all,



I have a set of DPA4060 Danish Pro Audio binaural mics in excellent
condition. I paid $1100 for them. High-end wind screens and clips, cable,
and battery box are included.

I will sell them for $500.00.

Contact me if interested.



Jerry Berrier


Using Fission for the Mac

Frank Ventura
 

Hi all, does anyone have any experience using Fission on the Mac? The reason I ask is I cannot figure out how to select a portion of an audio track. Is there any tutorials for this out there?
Thanks


A Sound Forge question

Barry Chapman
 

Can anyone tell me if it is possible, and if so how, to do what I want in
Sound Forge 9.



I want to be able to lower the volume of part of the middle of a file. But I
don't want it to just step down and up from one level to the other, but
rather fade from the higher level to the lower level over a half second or
so, remain at the lower level for the length of the selection, then fade up
again.



Any help would be appreciated.



Thanks,

Barry Chapman

561 - 580 of 4015