Date   

Re: Zoom marker function in firmware 2.30

Hamit Campos
 

Ah okay. Wow yeah then it's coded right into the file then. That could be mad annoying as I said before.

On 5/21/2020 5:10 PM, Georgina Joyce wrote:
Hello Hamit,

I should imagine that pre record is off. I have not even looked at that setting, so it is at its default. setting.

Regards,


On 21 May 2020, at 20:59, Hamit Campos <hamitcampos@...> wrote:

Ah interesting that doesn't add up. But I guess again as you said maybe they are in the file for lining up with the video. So do you get them in the file even if you don't have pre record on? From what you're suggesting I guess perhaps but let me know. But yeah that is odd. Sounds like it's actually incoding them into the file and not just making beeping sounds like the Olympus recorders. I don't know if the F 1s do what you're describing. Hope not. Well we'll see I guess when I first get the thing to write to the card again. But yes I'll ask Abby to turn it on.

On 5/21/2020 3:53 PM, Aidan wrote:
It seems to behave the same as on the h1n, wich I do have, and there
its much easyer to turn them on/off, but I don't like the fact that
they appear in the file. Yes, its fru the headphones only, but when
playback the file the beeps are in there. So you have to cut them out.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah you found it Gena. So I was right then you have to set them then.
Where was it? I'll see if Abby can help me turn them on. Now you said
something about it's all over your recordings. Does it come over the
speaker as well then? Because again compairing with the F recorders on
those you get it in the headphone jack. Only over the headphones as I've
been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30
firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording
menu. The bottom of the list is Sound markers. When you enter that menu
there are strange options which didn’t make any sense to me initially.
Then I found in the mode menu option there are 3 options. Off which is the
default. Then Record and the bottom option Recorde and stop. They are
quite long loud beeps by default. But the menu has configurable options.

But is it useful to us? The stop only works when stopping a recording not
playback. As its function is to synchronise filming. The recording starts
with the loud bleep. So all recordings will need editing. So you can make
up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73



Re: Zoom marker function in firmware 2.30

Georgina Joyce
 

Hello Hamit,

You will have to bend John’s ear. They could easily put bleeps in for us as they have done it for camera users.

Regards,


On 21 May 2020, at 21:22, Hamit Campos <hamitcampos@...> wrote:

Ah mad annoying. Is there a toen for pausing though? But yeah that's going to be something to consider then. Oh well. At least it's something. Not what I'd thought it was but oh well.

On 5/21/2020 4:19 PM, Aidan wrote:
Well, yes they actually appear in the file. Even if pre record is
turned off, as soon as the sound marker is turned on, then you get
them in the file. I tested that by not having headphones plugged in,
then press record on h1n, I heard nothing but when stopt a few seconds
later and played I can here them loud and clear also just before you
press stop they also appear.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah interesting that doesn't add up. But I guess again as you said maybe
they are in the file for lining up with the video. So do you get them in
the file even if you don't have pre record on? From what you're
suggesting I guess perhaps but let me know. But yeah that is odd. Sounds
like it's actually incoding them into the file and not just making
beeping sounds like the Olympus recorders. I don't know if the F 1s do
what you're describing. Hope not. Well we'll see I guess when I first
get the thing to write to the card again. But yes I'll ask Abby to turn
it on.

On 5/21/2020 3:53 PM, Aidan wrote:
It seems to behave the same as on the h1n, wich I do have, and there
its much easyer to turn them on/off, but I don't like the fact that
they appear in the file. Yes, its fru the headphones only, but when
playback the file the beeps are in there. So you have to cut them out.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah you found it Gena. So I was right then you have to set them then.
Where was it? I'll see if Abby can help me turn them on. Now you said
something about it's all over your recordings. Does it come over the
speaker as well then? Because again compairing with the F recorders on
those you get it in the headphone jack. Only over the headphones as I've
been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30
firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording
menu. The bottom of the list is Sound markers. When you enter that menu
there are strange options which didn’t make any sense to me initially.
Then I found in the mode menu option there are 3 options. Off which is
the
default. Then Record and the bottom option Recorde and stop. They are
quite long loud beeps by default. But the menu has configurable
options.

But is it useful to us? The stop only works when stopping a recording
not
playback. As its function is to synchronise filming. The recording
starts
with the loud bleep. So all recordings will need editing. So you can
make
up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73





Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: Zoom marker function in firmware 2.30

Georgina Joyce
 

Hello Hamit,

I should imagine that pre record is off. I have not even looked at that setting, so it is at its default. setting.

Regards,


On 21 May 2020, at 20:59, Hamit Campos <hamitcampos@...> wrote:

Ah interesting that doesn't add up. But I guess again as you said maybe they are in the file for lining up with the video. So do you get them in the file even if you don't have pre record on? From what you're suggesting I guess perhaps but let me know. But yeah that is odd. Sounds like it's actually incoding them into the file and not just making beeping sounds like the Olympus recorders. I don't know if the F 1s do what you're describing. Hope not. Well we'll see I guess when I first get the thing to write to the card again. But yes I'll ask Abby to turn it on.

On 5/21/2020 3:53 PM, Aidan wrote:
It seems to behave the same as on the h1n, wich I do have, and there
its much easyer to turn them on/off, but I don't like the fact that
they appear in the file. Yes, its fru the headphones only, but when
playback the file the beeps are in there. So you have to cut them out.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah you found it Gena. So I was right then you have to set them then.
Where was it? I'll see if Abby can help me turn them on. Now you said
something about it's all over your recordings. Does it come over the
speaker as well then? Because again compairing with the F recorders on
those you get it in the headphone jack. Only over the headphones as I've
been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30
firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording
menu. The bottom of the list is Sound markers. When you enter that menu
there are strange options which didn’t make any sense to me initially.
Then I found in the mode menu option there are 3 options. Off which is the
default. Then Record and the bottom option Recorde and stop. They are
quite long loud beeps by default. But the menu has configurable options.

But is it useful to us? The stop only works when stopping a recording not
playback. As its function is to synchronise filming. The recording starts
with the loud bleep. So all recordings will need editing. So you can make
up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73





Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: Zoom marker function in firmware 2.30

Hamit Campos
 

Ah mad annoying. Is there a toen for pausing though? But yeah that's going to be something to consider then. Oh well. At least it's something. Not what I'd thought it was but oh well.

On 5/21/2020 4:19 PM, Aidan wrote:
Well, yes they actually appear in the file. Even if pre record is
turned off, as soon as the sound marker is turned on, then you get
them in the file. I tested that by not having headphones plugged in,
then press record on h1n, I heard nothing but when stopt a few seconds
later and played I can here them loud and clear also just before you
press stop they also appear.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah interesting that doesn't add up. But I guess again as you said maybe
they are in the file for lining up with the video. So do you get them in
the file even if you don't have pre record on? From what you're
suggesting I guess perhaps but let me know. But yeah that is odd. Sounds
like it's actually incoding them into the file and not just making
beeping sounds like the Olympus recorders. I don't know if the F 1s do
what you're describing. Hope not. Well we'll see I guess when I first
get the thing to write to the card again. But yes I'll ask Abby to turn
it on.

On 5/21/2020 3:53 PM, Aidan wrote:
It seems to behave the same as on the h1n, wich I do have, and there
its much easyer to turn them on/off, but I don't like the fact that
they appear in the file. Yes, its fru the headphones only, but when
playback the file the beeps are in there. So you have to cut them out.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah you found it Gena. So I was right then you have to set them then.
Where was it? I'll see if Abby can help me turn them on. Now you said
something about it's all over your recordings. Does it come over the
speaker as well then? Because again compairing with the F recorders on
those you get it in the headphone jack. Only over the headphones as I've
been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30
firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording
menu. The bottom of the list is Sound markers. When you enter that menu
there are strange options which didn’t make any sense to me initially.
Then I found in the mode menu option there are 3 options. Off which is
the
default. Then Record and the bottom option Recorde and stop. They are
quite long loud beeps by default. But the menu has configurable
options.

But is it useful to us? The stop only works when stopping a recording
not
playback. As its function is to synchronise filming. The recording
starts
with the loud bleep. So all recordings will need editing. So you can
make
up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73





Re: Zoom marker function in firmware 2.30

Aidan
 

Well, yes they actually appear in the file. Even if pre record is
turned off, as soon as the sound marker is turned on, then you get
them in the file. I tested that by not having headphones plugged in,
then press record on h1n, I heard nothing but when stopt a few seconds
later and played I can here them loud and clear also just before you
press stop they also appear.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah interesting that doesn't add up. But I guess again as you said maybe
they are in the file for lining up with the video. So do you get them in
the file even if you don't have pre record on? From what you're
suggesting I guess perhaps but let me know. But yeah that is odd. Sounds
like it's actually incoding them into the file and not just making
beeping sounds like the Olympus recorders. I don't know if the F 1s do
what you're describing. Hope not. Well we'll see I guess when I first
get the thing to write to the card again. But yes I'll ask Abby to turn
it on.

On 5/21/2020 3:53 PM, Aidan wrote:
It seems to behave the same as on the h1n, wich I do have, and there
its much easyer to turn them on/off, but I don't like the fact that
they appear in the file. Yes, its fru the headphones only, but when
playback the file the beeps are in there. So you have to cut them out.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah you found it Gena. So I was right then you have to set them then.
Where was it? I'll see if Abby can help me turn them on. Now you said
something about it's all over your recordings. Does it come over the
speaker as well then? Because again compairing with the F recorders on
those you get it in the headphone jack. Only over the headphones as I've
been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30
firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording
menu. The bottom of the list is Sound markers. When you enter that menu
there are strange options which didn’t make any sense to me initially.
Then I found in the mode menu option there are 3 options. Off which is
the
default. Then Record and the bottom option Recorde and stop. They are
quite long loud beeps by default. But the menu has configurable
options.

But is it useful to us? The stop only works when stopping a recording
not
playback. As its function is to synchronise filming. The recording
starts
with the loud bleep. So all recordings will need editing. So you can
make
up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73







Re: Zoom marker function in firmware 2.30

Hamit Campos
 

Ah interesting that doesn't add up. But I guess again as you said maybe they are in the file for lining up with the video. So do you get them in the file even if you don't have pre record on? From what you're suggesting I guess perhaps but let me know. But yeah that is odd. Sounds like it's actually incoding them into the file and not just making beeping sounds like the Olympus recorders. I don't know if the F 1s do what you're describing. Hope not. Well we'll see I guess when I first get the thing to write to the card again. But yes I'll ask Abby to turn it on.

On 5/21/2020 3:53 PM, Aidan wrote:
It seems to behave the same as on the h1n, wich I do have, and there
its much easyer to turn them on/off, but I don't like the fact that
they appear in the file. Yes, its fru the headphones only, but when
playback the file the beeps are in there. So you have to cut them out.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah you found it Gena. So I was right then you have to set them then.
Where was it? I'll see if Abby can help me turn them on. Now you said
something about it's all over your recordings. Does it come over the
speaker as well then? Because again compairing with the F recorders on
those you get it in the headphone jack. Only over the headphones as I've
been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30
firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording
menu. The bottom of the list is Sound markers. When you enter that menu
there are strange options which didn’t make any sense to me initially.
Then I found in the mode menu option there are 3 options. Off which is the
default. Then Record and the bottom option Recorde and stop. They are
quite long loud beeps by default. But the menu has configurable options.

But is it useful to us? The stop only works when stopping a recording not
playback. As its function is to synchronise filming. The recording starts
with the loud bleep. So all recordings will need editing. So you can make
up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73





Re: Zoom marker function in firmware 2.30

Aidan
 

It seems to behave the same as on the h1n, wich I do have, and there
its much easyer to turn them on/off, but I don't like the fact that
they appear in the file. Yes, its fru the headphones only, but when
playback the file the beeps are in there. So you have to cut them out.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah you found it Gena. So I was right then you have to set them then.
Where was it? I'll see if Abby can help me turn them on. Now you said
something about it's all over your recordings. Does it come over the
speaker as well then? Because again compairing with the F recorders on
those you get it in the headphone jack. Only over the headphones as I've
been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30
firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording
menu. The bottom of the list is Sound markers. When you enter that menu
there are strange options which didn’t make any sense to me initially.
Then I found in the mode menu option there are 3 options. Off which is the
default. Then Record and the bottom option Recorde and stop. They are
quite long loud beeps by default. But the menu has configurable options.

But is it useful to us? The stop only works when stopping a recording not
playback. As its function is to synchronise filming. The recording starts
with the loud bleep. So all recordings will need editing. So you can make
up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73






Re: Zoom marker function in firmware 2.30

Hamit Campos
 

Ah you found it Gena. So I was right then you have to set them then. Where was it? I'll see if Abby can help me turn them on. Now you said something about it's all over your recordings. Does it come over the speaker as well then? Because again compairing with the F recorders on those you get it in the headphone jack. Only over the headphones as I've been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30 firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording menu. The bottom of the list is Sound markers. When you enter that menu there are strange options which didn’t make any sense to me initially. Then I found in the mode menu option there are 3 options. Off which is the default. Then Record and the bottom option Recorde and stop. They are quite long loud beeps by default. But the menu has configurable options.

But is it useful to us? The stop only works when stopping a recording not playback. As its function is to synchronise filming. The recording starts with the loud bleep. So all recordings will need editing. So you can make up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73



Zoom marker function in firmware 2.30

Georgina Joyce
 

Hello All,

I can confirm that beeps do sound on record and stop with the 2.30 firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording menu. The bottom of the list is Sound markers. When you enter that menu there are strange options which didn’t make any sense to me initially. Then I found in the mode menu option there are 3 options. Off which is the default. Then Record and the bottom option Recorde and stop. They are quite long loud beeps by default. But the menu has configurable options.

But is it useful to us? The stop only works when stopping a recording not playback. As its function is to synchronise filming. The recording starts with the loud bleep. So all recordings will need editing. So you can make up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: Firmware version that makes the H6 beep.

Aidan
 

I don't have one so I don't no fore sure, but I guess you have to turn
them on first yes.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
So where do you set the tones? Or did yours just magically do it? I only ask
because Gena got confused as to weather hers updated or not. I know mine
did. But I suspect like the F recorders you have to set the tones.
On May 21, 2020, at 7:09 AM, Aidan <aidan.smarttalk@...> wrote:

Glad you found it, yes 2.30 is the latest I saw also.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah okay so downloaded the right 1 than. Just wanted to be sure as when I
went to the page I saw nothing about beeps. I didn't see the right up
you posted I mean. It's hard to tell but it seemed from the write up you
have to in-able them. Someware in the rec menu. So I'll guess I'll have
to update it and see about the tones. I think this is the case on the F
recorders as well though. you have to turn the tones on.

On 5/20/2020 6:13 PM, Georgina Joyce wrote:
Hello Hamit,

That was the version I found and posted here the extract talking about
beeps. As I am sure this is for when connected to a camera I haven’t
checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep.
What was the version of this? I went to the site and 2.30 is the newest
I
saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73









For those looking for free learning material

Georgina Joyce
 

Hello All,

I just saw this on the Reaper list and thought that those here who are not subscribed to RWP might like it.

On 21 May 2020, at 12:47, Jim Noseworthy <jim.noseworthy@... <mailto:jim.noseworthy@...>> wrote:


Hello all,

It's not time for my normal monthly mail-out yet, but I wanted to share a really exciting new free resource -- and I also need your urgent help!

----------------------------------------------------------------------
---------- MY NEW FREE 'EXPERT TIPS' TUTORIAL PODCAST FOR SOUND ON
SOUND!
----------------------------------------------------------------------
----------

Some of you may already have spotted Sound On Sound magazine's recent announcement of three new podcast channels. One of these is dedicated to recording and mixing, and they've commissioned me to deliver its first tutorial show, called 'Expert Tracking & Mixing Tips' -- which has just gone live today! The first episode is all about compressing snare drums, and you can listen to that for free here:

https://share.transistor.fm/s/53c6630b

As you'll know if you've heard my Cambridge-MT Patrons Podcast, I'm a big fan of audio examples, so I'll be using lots of audio illustrations in this new SOS show as a matter of course -- indeed, there are more than 20 processing demonstrations just in the first 15-minute episode! Also, because playback quality is so important for audio tutorials, I've arranged with the magazine that the podcast won't have any mastering processing applied to it, since that'd interfere with the audio illustrations. And I've also arranged with them that they'll host a lossless 24-bit WAV download of the episode that you can import into your DAW for critical listening.


---------------------------------------
...AND I NEED YOUR URGENT HELP!
---------------------------------------

If you like the sound of this new podcast, can I also ask for your help?

The reason this show is completely free to you is that it's being funded by the magazine, and they'll understandably be monitoring download/subscribe numbers to decide whether it's worth continuing. So I'd like to ask you please to download my first 'Expert Tips' episode and subscribe to the 'Recording & Mixing' channel TODAY OR TOMORROW (ie. Thursday or Friday). If SOS see a big spike in their metrics for the launch of this show, that'll send the most powerful message that you want them to continue commissioning my show in the long term.

But why the rush? Well, the magazine themselves will be ramping up general publicity for the 'Recording & Mixing' channel over the weekend, so if you don't download/subscribe before then, your response may just get lost in the noise, and won't as clearly indicate support for this specific 'Expert Tips' podcast. So if you want the magazine to continue financing my free tutorials, I'd encourage you to act now -- it only takes a few seconds to download and subscribe. Here's that link again:

https://share.transistor.fm/s/53c6630b


Oh, and keep your eyes peeled for another big new resource
announcement from me next week! I tell you, it's a three-ring circus
round here at the moment... :)

Cheers,
Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: Firmware version that makes the H6 beep.

Hamit Campos
 

So where do you set the tones? Or did yours just magically do it? I only ask because Gena got confused as to weather hers updated or not. I know mine did. But I suspect like the F recorders you have to set the tones.

On May 21, 2020, at 7:09 AM, Aidan <aidan.smarttalk@...> wrote:

Glad you found it, yes 2.30 is the latest I saw also.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah okay so downloaded the right 1 than. Just wanted to be sure as when I
went to the page I saw nothing about beeps. I didn't see the right up
you posted I mean. It's hard to tell but it seemed from the write up you
have to in-able them. Someware in the rec menu. So I'll guess I'll have
to update it and see about the tones. I think this is the case on the F
recorders as well though. you have to turn the tones on.

On 5/20/2020 6:13 PM, Georgina Joyce wrote:
Hello Hamit,

That was the version I found and posted here the extract talking about
beeps. As I am sure this is for when connected to a camera I haven’t
checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep.
What was the version of this? I went to the site and 2.30 is the newest I
saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73







Re: Firmware version that makes the H6 beep.

Aidan
 

Glad you found it, yes 2.30 is the latest I saw also.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah okay so downloaded the right 1 than. Just wanted to be sure as when I
went to the page I saw nothing about beeps. I didn't see the right up
you posted I mean. It's hard to tell but it seemed from the write up you
have to in-able them. Someware in the rec menu. So I'll guess I'll have
to update it and see about the tones. I think this is the case on the F
recorders as well though. you have to turn the tones on.

On 5/20/2020 6:13 PM, Georgina Joyce wrote:
Hello Hamit,

That was the version I found and posted here the extract talking about
beeps. As I am sure this is for when connected to a camera I haven’t
checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep.
What was the version of this? I went to the site and 2.30 is the newest I
saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73






Re: A Zoom question.

Colin Howard
 

Joe,

I asked the original sender if the cam needs power, it seems it can be
powered even from an USB hub like mine.

I've sent the info via my P.A to her son who has an Amazon account, hope he
is able to order it for me to be delivered at my home address, hope, then,
it is a simple process of plugging in, finding the device in my Windows 7
sounds and audio devices and enabling same.

However, before attempting this, hope to avail myself of a pair of eyes to
peruse the documentation rather than go ploughing in feet first and possibly
damaging my system!

On a personla note, you did not come back to me about Paul David's online
problems whereas both Terry and Kevin did. It seems he's now sorted, had an
engineer out yesterday evening to replace his faulty power unit.

On Wed, 20 May 2020 20:21:09 +0100, "Joe Paton" <joe@...>
wrote:

-looks good colin.
-
-Availability is the problem these days, but I'm interested myself.
-
-
-take care, thanks for the information.
-Joe
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


Re: Firmware version that makes the H6 beep.

Hamit Campos
 

Ah okay so downloaded the right 1 than. Just wanted to be sure as when I went to the page I saw nothing about beeps. I didn't see the right up you posted I mean. It's hard to tell but it seemed from the write up you have to in-able them. Someware in the rec menu. So I'll guess I'll have to update it and see about the tones. I think this is the case on the F recorders as well though. you have to turn the tones on.

On 5/20/2020 6:13 PM, Georgina Joyce wrote:
Hello Hamit,

That was the version I found and posted here the extract talking about beeps. As I am sure this is for when connected to a camera I haven’t checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep. What was the version of this? I went to the site and 2.30 is the newest I saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73



Re: Firmware version that makes the H6 beep.

Georgina Joyce
 

Hello Hamit,

That was the version I found and posted here the extract talking about beeps. As I am sure this is for when connected to a camera I haven’t checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep. What was the version of this? I went to the site and 2.30 is the newest I saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Firmware version that makes the H6 beep.

Hamit Campos
 

I forget now who said there was a new firmware that makes the H6 beep. What was the version of this? I went to the site and 2.30 is the newest I saw.


Re: A Zoom question.

Joe Paton
 

looks good colin.

Availability is the problem these days, but I'm interested myself.


take care, thanks for the information.
Joe


Re: Audio learning resources

Tony Sweeney
 

Hi Gina,


Thank you for the link to those CAVI early tutorials.


They downloaded successfully and I look forward to reading and studying them in full.


Regards,


Tony Sweeney

On 20/05/2020 14:37, Georgina Joyce wrote:
Hello Tony,

I don’t know if it is still available now so I’ll provide a link below. There were CAVI classes that were made public, then I think withdrawn. Because it was a course of using Reaper and the key mappings had changed. However, the first part is called audio essentials. Which is very informative and will help you.

https://www.dropbox.com/s/dyuegc7txt33des/audio_platinum.zip?dl=1

Gena

On 20 May 2020, at 08:29, Tony Sweeney <tonymsweeney@...> wrote:

Hi folk,


I wonder as a comparative newbee could you recommend any tutorials/podcasts etc. for learning audio as a beginner.


Thinking of say file sizes, compression anddifferent file types and other to get started with?



It would be good to know too how to know what can be sent say in an email as compared with just providing a link to a file sharing service?


Thanks for any assist with this,


Tony Sweeney



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73



Re: Audio learning resources

David Goldfield
 

Brian Hartgen <www.hartgen.org>offers a few courses on some audio products: Gold Wave, Soundforge and Reaper comes to mind.

On 5/20/2020 9:37 AM, Georgina Joyce wrote:
Hello Tony,

I don’t know if it is still available now so I’ll provide a link below. There were CAVI classes that were made public, then I think withdrawn. Because it was a course of using Reaper and the key mappings had changed. However, the first part is called audio essentials. Which is very informative and will help you.

https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.dropbox.com%2Fs%2Fdyuegc7txt33des%2Faudio_platinum.zip%3Fdl%3D1&amp;data=02%7C01%7C%7Cfcee9207feae4e26653a08d7fcc2eee3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637255786464515262&amp;sdata=zF2HjTDzhp1u0GY8w36Po5EQX32iMcRBBsp7Ac6jZiA%3D&amp;reserved=0

Gena

On 20 May 2020, at 08:29, Tony Sweeney <tonymsweeney@...> wrote:

Hi folk,


I wonder as a comparative newbee could you recommend any tutorials/podcasts etc. for learning audio as a beginner.


Thinking of say file sizes, compression anddifferent file types and other to get started with?



It would be good to know too how to know what can be sent say in an email as compared with just providing a link to a file sharing service?


Thanks for any assist with this,


Tony Sweeney



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73