Date   

Re: Question about changing pitch without touching the tempo of an audio file

Brian Olesen
 

Hi Colin,
Thank you for replying.
I will give it a shot, and you are right an octave is quite a lot to move a
recording!

I could also use Sonar's Radius 2 but I'm not so familiar with adjusting
that specific plugin.

Brian
Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Colin Howard
Sendt: 14. maj 2019 07:34
Til: all-audio@groups.io
Emne: Re: [all-audio] Question about changing pitch without touching the
tempo of an audio file

Greetings,

GoldWave will do the job.

There is a checkbox for tempo unchanged, check this for whatever you need,
say decrease by one octave, the sound is bound to be degraded slightly
because you are altering it's nature but the bird sound ought to be
acceptable.

It's in the effects menu and is very customizeable.

On Mon, 13 May 2019 19:52:10 +0200, amongst other things, "Brian Olesen"
<brian@blindkom.dk> wrote:

-Hi folks,
-
-I have a partially deaf friend, who would love to hear how some different
-birds sounds, but her problem is that she can't hear the high pitched
-frequencies of most birds.
-
-She would love to hear them in the original tempo, but with a significantly
-lowered pitch.
-
-Wich tool will do this the best way, and do it without harming the original
-feel of the sound too much?
-
-
-
-Thanks in advance.
-
-
-
-Brian from Denmark J
-
-
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


Re: Question about changing pitch without touching the tempo of an audio file

Colin Howard
 

Greetings,

GoldWave will do the job.

There is a checkbox for tempo unchanged, check this for whatever you need,
say decrease by one octave, the sound is bound to be degraded slightly
because you are altering it's nature but the bird sound ought to be
acceptable.

It's in the effects menu and is very customizeable.

On Mon, 13 May 2019 19:52:10 +0200, amongst other things, "Brian Olesen"
<brian@blindkom.dk> wrote:

-Hi folks,
-
-I have a partially deaf friend, who would love to hear how some different
-birds sounds, but her problem is that she can't hear the high pitched
-frequencies of most birds.
-
-She would love to hear them in the original tempo, but with a significantly
-lowered pitch.
-
-Wich tool will do this the best way, and do it without harming the original
-feel of the sound too much?
-
-
-
-Thanks in advance.
-
-
-
-Brian from Denmark J
-
-
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


Something I observed while broadcasting with Backpack Studio

Dane Trethowan <grtdane@...>
 

Hi,
Sorry if the below is old news to some people. I only discovered the twerk with Backpack Studio and wanted to alert users.
When broadcasting using Backpack Studio for IOS - iPhone or iPad - be sure that you turn Auto Ducking off - the function where Voiceover lowers other levels of sound to make itself heard.
If Auto Ducking is enabled and Voiceover is speaking then the level of your broadcast output drops.
The way around this it seems is to increase the volume of the VoiceOver output.
This will not have any effect on your project since Voiceover is not recorded or broadcast alongside your output.


Question about changing pitch without touching the tempo of an audio file

Brian Olesen
 

Hi folks,

I have a partially deaf friend, who would love to hear how some different
birds sounds, but her problem is that she can't hear the high pitched
frequencies of most birds.

She would love to hear them in the original tempo, but with a significantly
lowered pitch.

Wich tool will do this the best way, and do it without harming the original
feel of the sound too much?



Thanks in advance.



Brian from Denmark J


Re: Hoping to buy

Curtis Delzer
 

accessibility, and the word "talks" or the brand Vizio.

Curtis Delzer
HS
W B 6 H E F
Rialto, CA

On 5/13/2019 6:14 AM, Gerardo Corripio wrote:
I’d like to someday buy myself a Samsung 32-inch minimum if possible, with speech on it. What models TV should I look for, or in the store, what should I tel the salesperson to look for within the menus, to ensure the TV has some sort of audio-guide for its menus, settings etc? Thanks for info.

Gera
Enviado desde mi iPhone SE de Telcel


Re: my Vizio 50-Inch 4k ultra smart TV

Curtis Delzer
 

well, my wife is tickled, I am tickled, our kitty is tickled to watch TV, and our neighbors are . . . which? :)

Not since the days of the first push button TVS, or even earlier have we had, as blind persons access to all aspects of a TV before. That is how innovating this is since after the accessibility in the menu was turned on, all that is necessary is to know which button is which on the remote and you're in. So, I guess you could say I was pleased! :)

Curtis Delzer
HS
W B 6 H E F
Rialto, CA

On 5/13/2019 5:57 AM, Hamit Campos wrote:
Pure epicness dude. Keep us posted on how it all works out.

On 5/13/2019 12:45 AM, Curtis Delzer wrote:
Remember I mentioned I'd won such about 2 weeks ago? Well, you all helped me with getting sort of aligned to it, the manual, how a "sound bar works and what is meant, so I wish to just let you all know I am all set up. Also, the "talks" mentioned which I had someone turn on from the main menu under "accessibility," talks every aspect of the TV, so I have two voices;  (1) from the cable box and (2) from the TV. How nice is this, making it also available to things over the net which it seems I can also stream if I wish too.


Re: Hoping to buy

Gerardo Corripio
 

I’m in Mexico, hoping models you’ll suggest are available here.

Gera
Enviado desde mi iPhone SE de Telcel

El 13 may 2019, a la(s) 8:16 a. m., Hamit Campos <hamitcampos@gmail.com> escribió:

First what country are you in? Because I see that sent from my IPhone is in spanish. I ask what country you're in because well at least in Central America things are a bit quite a bit behind. Also models maybe different.

On 5/13/2019 9:14 AM, Gerardo Corripio wrote:
I’d like to someday buy myself a Samsung 32-inch minimum if possible, with speech on it. What models TV should I look for, or in the store, what should I tel the salesperson to look for within the menus, to ensure the TV has some sort of audio-guide for its menus, settings etc? Thanks for info.

Gera
Enviado desde mi iPhone SE de Telcel



Re: Hoping to buy

Hamit Campos
 

First what country are you in? Because I see that sent from my IPhone is in spanish. I ask what country you're in because well at least in Central America things are a bit quite a bit behind. Also models maybe different.

On 5/13/2019 9:14 AM, Gerardo Corripio wrote:
I’d like to someday buy myself a Samsung 32-inch minimum if possible, with speech on it. What models TV should I look for, or in the store, what should I tel the salesperson to look for within the menus, to ensure the TV has some sort of audio-guide for its menus, settings etc? Thanks for info.

Gera
Enviado desde mi iPhone SE de Telcel


Hoping to buy

Gerardo Corripio
 

I’d like to someday buy myself a Samsung 32-inch minimum if possible, with speech on it. What models TV should I look for, or in the store, what should I tel the salesperson to look for within the menus, to ensure the TV has some sort of audio-guide for its menus, settings etc? Thanks for info.

Gera
Enviado desde mi iPhone SE de Telcel


Re: my Vizio 50-Inch 4k ultra smart TV

Hamit Campos
 

Pure epicness dude. Keep us posted on how it all works out.

On 5/13/2019 12:45 AM, Curtis Delzer wrote:
Remember I mentioned I'd won such about 2 weeks ago? Well, you all helped me with getting sort of aligned to it, the manual, how a "sound bar works and what is meant, so I wish to just let you all know I am all set up. Also, the "talks" mentioned which I had someone turn on from the main menu under "accessibility," talks every aspect of the TV, so I have two voices;  (1) from the cable box and (2) from the TV. How nice is this, making it also available to things over the net which it seems I can also stream if I wish too.


my Vizio 50-Inch 4k ultra smart TV

Curtis Delzer
 

Remember I mentioned I'd won such about 2 weeks ago? Well, you all helped me with getting sort of aligned to it, the manual, how a "sound bar works and what is meant, so I wish to just let you all know I am all set up. Also, the "talks" mentioned which I had someone turn on from the main menu under "accessibility," talks every aspect of the TV, so I have two voices;  (1) from the cable box and (2) from the TV. How nice is this, making it also available to things over the net which it seems I can also stream if I wish too.


--


Curtis Delzer
HS
W B 6 H E F
Rialto, CA


Re: Intagraded amps:

Dane Trethowan <grtdane@...>
 

May you enjoy and keep us informed of your experience with your equipment whatever you decide to buy.

On 9 May 2019, at 10:25 am, Mike Barnard <9988mbarnard@gmail.com> wrote:

Thanks for the advise. I have a phono preamp, I do appreciate your help, sometimes it is a little confusing for me. I probably will go with theavr-3400H. $400.00 I think is a good savings, and I don't use airplay much.
Again thanks.
Mike Barnard

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Dane Trethowan
Sent: Wednesday, May 8, 2019 6:23 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Intagraded amps:

I think you meant to say Integrated Amp? Well actually we’re talking Surround-Sound receivers here.
I have a Denon AVR-X3400H and I bought this a couple of months before the arrival of the Denon AVR-X3500H.
As far as I know there are 2 main differences and whether you think these difference make the AVRX-3500H worth buying is a question that only you can answer.
I myself wish I could have waited the extra months. Unfortunately at the time I needed to replace my then AVR-2113 urgently as the whole device had crashed after an attempted firmware update and couldn’t be recovered.
So it was a clear choice for me at the time because everything in my lounge pretty much relies on the Surround-Sound receiver to function, replace the Receiver or go without Entertainment in the lounge.
Anyway back to the 2 choices you have outlined.
The AVR-X3500H has a Fono input stage and is Airplay II compatible.


On 9 May 2019, at 5:57 am, Mike Barnard <9988mbarnard@gmail.com> wrote:

I have a chance to get the Denon AVR-x 3400 H for $599.00 and the 3500 is
$999.00 Are there many differences?

Crutchfield is selling this amp because it is discontinued.

You all have good advice, so I wanted to ask befor jumping at it.

Mike Barnard









Re: Intagraded amps:

Mike Barnard
 

Thanks for the advise. I have a phono preamp, I do appreciate your help, sometimes it is a little confusing for me. I probably will go with theavr-3400H. $400.00 I think is a good savings, and I don't use airplay much.
Again thanks.
Mike Barnard

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Dane Trethowan
Sent: Wednesday, May 8, 2019 6:23 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Intagraded amps:

I think you meant to say Integrated Amp? Well actually we’re talking Surround-Sound receivers here.
I have a Denon AVR-X3400H and I bought this a couple of months before the arrival of the Denon AVR-X3500H.
As far as I know there are 2 main differences and whether you think these difference make the AVRX-3500H worth buying is a question that only you can answer.
I myself wish I could have waited the extra months. Unfortunately at the time I needed to replace my then AVR-2113 urgently as the whole device had crashed after an attempted firmware update and couldn’t be recovered.
So it was a clear choice for me at the time because everything in my lounge pretty much relies on the Surround-Sound receiver to function, replace the Receiver or go without Entertainment in the lounge.
Anyway back to the 2 choices you have outlined.
The AVR-X3500H has a Fono input stage and is Airplay II compatible.


On 9 May 2019, at 5:57 am, Mike Barnard <9988mbarnard@gmail.com> wrote:

I have a chance to get the Denon AVR-x 3400 H for $599.00 and the 3500 is
$999.00 Are there many differences?

Crutchfield is selling this amp because it is discontinued.

You all have good advice, so I wanted to ask befor jumping at it.

Mike Barnard




Re: Intagraded amps:

Dane Trethowan <grtdane@...>
 

I think you meant to say Integrated Amp? Well actually we’re talking Surround-Sound receivers here.
I have a Denon AVR-X3400H and I bought this a couple of months before the arrival of the Denon AVR-X3500H.
As far as I know there are 2 main differences and whether you think these difference make the AVRX-3500H worth buying is a question that only you can answer.
I myself wish I could have waited the extra months. Unfortunately at the time I needed to replace my then AVR-2113 urgently as the whole device had crashed after an attempted firmware update and couldn’t be recovered.
So it was a clear choice for me at the time because everything in my lounge pretty much relies on the Surround-Sound receiver to function, replace the Receiver or go without Entertainment in the lounge.
Anyway back to the 2 choices you have outlined.
The AVR-X3500H has a Fono input stage and is Airplay II compatible.

On 9 May 2019, at 5:57 am, Mike Barnard <9988mbarnard@gmail.com> wrote:

I have a chance to get the Denon AVR-x 3400 H for $599.00 and the 3500 is
$999.00 Are there many differences?

Crutchfield is selling this amp because it is discontinued.

You all have good advice, so I wanted to ask befor jumping at it.

Mike Barnard




test please ignore

Joe Paton
 


Intagraded amps:

Mike Barnard
 

I have a chance to get the Denon AVR-x 3400 H for $599.00 and the 3500 is
$999.00 Are there many differences?

Crutchfield is selling this amp because it is discontinued.

You all have good advice, so I wanted to ask befor jumping at it.

Mike Barnard


accessible software for making video dvds?

goshawk on horseback
 

hello all,
does anyone know of any really accessible software for making standard video dvds? in other words, ones that will play in a standard dvd player.
as I have some downloaded tv series in video format, that I would like to make standard dvds out of, and some other video files that I would like to make a dvd from.
ideally, the software should be able to work with a range of video file formats, but I do have a video format converter program if this is not possible.
I'm using win7 ultimate 64bit, and either window-eyes or nvda.

Simon


Re: Reading Olympus DM70 filenames on a Mac

Dane Trethowan <grtdane@...>
 

Well again I can only speak from my experience.
I Don’t know the particular recorder unit in question but I do know that on all the Olympus recorders I’ve had I have had no problem win removing the card and inserting the card into a Mac, Pc or whatever and retrieving the files for editing etc from there.
As you rightly say you have to set the recorder to use the SD card as memory before you start or copy from the internal to the SD card memory if the recording has already been made.

On 8 May 2019, at 2:34 pm, Tim Noonan <tim@timnoonan.com.au> wrote:

Depending on the class and speed of the Micro SD Card, there can be delays after record starts, meaning initial audio can be lost. Also, it is a significant battery drain if the unit is left in sleep for a period of time when storage is set to SD..

Of course, the other obvious problem is that you need to use a Micro SD to SD converter, to access the files, introducing further fuss.


Tim Noonan
Tim Noonan
tim@timnoonan.com.au



On 8 May 2019, at 2:24 pm, Dane Trethowan <grtdane@internode.on.net> wrote:

Yeah so couldn’t one record onto the Micro SD card, remove it and place into computer etc to copy the files?


On 8 May 2019, at 2:14 pm, Tim Noonan <tim@timnoonan.com.au> wrote:

The DM 720 only has a Micro SD slot, but in addition it has reasonable internal storage for saving recordings.


Tim Noonan
tim@timnoonan.com.au



On 8 May 2019, at 1:41 pm, Dane Trethowan <grtdane@internode.on.net> wrote:

Hi,
Does your MacBook Pro have a SD Card slot? I know my model doesn’t but some do.
If your machine has a SD Card slot then why not remove the SD card from the DM720 and insert it directly into the Mac machine so you can browse the files directly from there, may save quite a bit of time.


On 8 May 2019, at 2:44 am, Mike Busboom <mbusboom@gmail.com> wrote:

Hello everyone,

I recently acquired an Olympus DM720 recorder, and I am very satisfied with the recording quality. Since I primarily use it to record interviews, it’s almost overkill.

I am having one problem, however:
What I want to do is move the recordings from the DM720 to my MacBook Pro. Whle the words „Remote device“ appear in the sidebar, no files are showing up when I arrow over to the file list. When I connect the DM720 to my MacBook Pro the 720 beeps twice and then says PC connection. But can anyone tell me why the MacBook doesn’t see the files? Once I hear the message, what do I need to do in order to get the list of files on the unit?

Thanks to all of you,

Mike
















Re: Reading Olympus DM70 filenames on a Mac

Tim Noonan
 

Depending on the class and speed of the Micro SD Card, there can be delays after record starts, meaning initial audio can be lost. Also, it is a significant battery drain if the unit is left in sleep for a period of time when storage is set to SD..

Of course, the other obvious problem is that you need to use a Micro SD to SD converter, to access the files, introducing further fuss.


Tim Noonan
Tim Noonan
tim@timnoonan.com.au

On 8 May 2019, at 2:24 pm, Dane Trethowan <grtdane@internode.on.net> wrote:

Yeah so couldn’t one record onto the Micro SD card, remove it and place into computer etc to copy the files?


On 8 May 2019, at 2:14 pm, Tim Noonan <tim@timnoonan.com.au> wrote:

The DM 720 only has a Micro SD slot, but in addition it has reasonable internal storage for saving recordings.


Tim Noonan
tim@timnoonan.com.au



On 8 May 2019, at 1:41 pm, Dane Trethowan <grtdane@internode.on.net> wrote:

Hi,
Does your MacBook Pro have a SD Card slot? I know my model doesn’t but some do.
If your machine has a SD Card slot then why not remove the SD card from the DM720 and insert it directly into the Mac machine so you can browse the files directly from there, may save quite a bit of time.


On 8 May 2019, at 2:44 am, Mike Busboom <mbusboom@gmail.com> wrote:

Hello everyone,

I recently acquired an Olympus DM720 recorder, and I am very satisfied with the recording quality. Since I primarily use it to record interviews, it’s almost overkill.

I am having one problem, however:
What I want to do is move the recordings from the DM720 to my MacBook Pro. Whle the words „Remote device“ appear in the sidebar, no files are showing up when I arrow over to the file list. When I connect the DM720 to my MacBook Pro the 720 beeps twice and then says PC connection. But can anyone tell me why the MacBook doesn’t see the files? Once I hear the message, what do I need to do in order to get the list of files on the unit?

Thanks to all of you,

Mike










Re: Reading Olympus DM70 filenames on a Mac

Dane Trethowan <grtdane@...>
 

Yeah so couldn’t one record onto the Micro SD card, remove it and place into computer etc to copy the files?

On 8 May 2019, at 2:14 pm, Tim Noonan <tim@timnoonan.com.au> wrote:

The DM 720 only has a Micro SD slot, but in addition it has reasonable internal storage for saving recordings.


Tim Noonan
tim@timnoonan.com.au



On 8 May 2019, at 1:41 pm, Dane Trethowan <grtdane@internode.on.net> wrote:

Hi,
Does your MacBook Pro have a SD Card slot? I know my model doesn’t but some do.
If your machine has a SD Card slot then why not remove the SD card from the DM720 and insert it directly into the Mac machine so you can browse the files directly from there, may save quite a bit of time.


On 8 May 2019, at 2:44 am, Mike Busboom <mbusboom@gmail.com> wrote:

Hello everyone,

I recently acquired an Olympus DM720 recorder, and I am very satisfied with the recording quality. Since I primarily use it to record interviews, it’s almost overkill.

I am having one problem, however:
What I want to do is move the recordings from the DM720 to my MacBook Pro. Whle the words „Remote device“ appear in the sidebar, no files are showing up when I arrow over to the file list. When I connect the DM720 to my MacBook Pro the 720 beeps twice and then says PC connection. But can anyone tell me why the MacBook doesn’t see the files? Once I hear the message, what do I need to do in order to get the list of files on the unit?

Thanks to all of you,

Mike









1501 - 1520 of 3776