Date   

Re: New In Stock Talking Multimeter

frank cuta
 

Dane,

Looks like it does not speak the range that is selected. Since I rarely
take mine off of DC volts its not much of a concern. I will probably
record a pen friend label listing all of the other ranges in order but I
don't expect to use them much except for perhaps capacitance and resistance.


Frank

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Dane
Trethowan
Sent: Friday, February 22, 2019 10:37 AM
To: all-audio@groups.io
Subject: Re: [all-audio] New In Stock Talking Multimeter


I beg the pardon of the list and don't know what I was thinking of when I
wrote that eMail.
Now for the interesting question.
On just examining the web page again I'm curious to know why a note has bee
added suggesting that this item is not suitable for Visually Impaired users?


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Brian Olesen
Sent: Saturday, 23 February 2019 4:43 AM
To: all-audio@groups.io
Subject: Re: [all-audio] New In Stock Talking Multimeter

Hi Dane,
You didn't look good enough my friend.
It's only $ 40. Grin

Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Dane Trethowan
Sendt: 22. februar 2019 18:26
Til: all-audio@groups.io
Emne: Re: [all-audio] New In Stock Talking Multimeter

Hi there and sorry for the late reply.
I've had a look at this meter and my own personal view is that $400 is one
hell of a lot to spend on something like this.
I bought a Bluetooth Multi Meter from an Australian supplier called Jaycar
Electronics and this does me well enough.
I use my Android phone along with the downloadable App which does a number
of things.
Firstly you can double-tap on the screen to have a voice readout or set this
to automatic mode, the App uses Google TTS Engine or whatever you have set
as a default TTS engine.
Second the App creates a log which you can upload to Dropbox or Google Drive
so you can keep track of the measurements you're making or add notes if
required.
The cost of this meter was $130 Australian.
A quick search on Amazon reveals quite a few Bluetooth Multi Meter tools
which may be useful or in fact be the same as the one I'm discussing here so
its up to the buyer I guess to do some testing and to return the unit if it
can't be used.
Thanks Frank for passing this information on to the list.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of frank cuta
Sent: Wednesday, 20 February 2019 7:14 AM
To: all-audio@groups.io
Subject: [all-audio] New In Stock Talking Multimeter

I can't review this because I just learned about it but at $40 I am
certainly going to byte.
Frank

Subject: New In Stock Talking Multimeter



https://www.mpja.com/Talking-Digital-Multimeter/productinfo/35042+ME

Talking Digital Multi meter 35042 TE




Stock No: 35042 ME

Order directly from here or call

1-800-652-6733
There is a video you can listen to on this page.


Talking, High tech. 10 function, Backlit, 3-1/2" digit hand held meter with
1" LCD display.
True RMS/Average Measurement Selection
Includes 9V battery, test leads, instructions Fuse Overload protection.
CE listed; IEC 1010 Cat III-1000V Compliant
NOTES:
1: To Turn OFF Voice; Press and Hold (~3sec.) "TRUE/AVG" Button
2: To Read Frequency: Select 750VAC Range- Press"HOLD/SELECT"
3: To Turn on Backlight: Press & Hold (~3sec.) "HOLD/SELECT" Button
Backlight will turn off after ~10seconds
4: Meter is Auto Off will turn off after ~20min SPECIFICATIONS DC VOLTS &
CURRENT
Volts: .2,2,20,200,1000V
Accuracy: .5% + 3 Counts on 200mV-200V
.8% + 10 Counts 1000VDC
Current: 20uA, 2mA, 20mA, 200mA,10A
Accuracy: .8% + 10 Counts on 20ua & 2mA 2% + 30 Counts on 20mA-10A AC VOLTS
(RMS/AVG) Frequency Response: Sine/Triangle: 40Hz-1KHz Other Waveform:
40Hz-200Hz
Volts: .2,2,20,200,750V
Accuracy: .8% + 5 Counts on .2-200V
1.2% +10Counts on 750V
Current: 20mA, 200mA, 10A
Accuracy: 2% + 30 Counts
RESISTANCE
Ranges: 200,2K,20K,200K,2M,20M Ohms
Accuracy: .8% + 5 Counts on 200 ohm
.8% + 3 Counts on 2K-2M
1% + 25 Counts on 20M
CAPACITANCE
Ranges: 20nF, 200nF, 2uF, 20uF, 200uF, 2mF, 20mF
Accuracy: 3.5% + 20 Counts on 20nF-20uF
5% + 10 Counts on 200uF-20mf
OTHER FUNCTIONS
Frequency: (Select 750VAC Range- Press"Hold/Select" Button Diode Test:
~3-4VDC open circuit
hFE: ~1mA test current
NCV: "Near Field AC" Beep Rate High for near/Low for far
L: 7-1/4" W: 3-1/2 T: 1-7/8" WT: 1.2




















-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4855 / Virus Database: 4793/15883 - Release Date: 08/14/18
Internal Virus Database is out of date.


Re: CC-Crane Transmitter Question

Howard Traxler <howard@...>
 

I think you could try it either way and see what works best for you.

On 2/25/2019 8:46 PM, Tom Kaufman wrote:
Howard: I first thought this may be achieved by adjusting the speaker volume that is on the keyboard of my computer! Now if I understand you correctly, this is not the case...correct? Also, just so I understood you correctly, you're saying I need to turn the volume of the transmitter up all the way...then adjust the output of the soundcard? OOr do I have that backwards?
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Monday, February 25, 2019 8:48 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Any sound card I've ever used is controlled via software. In windows xp
it was in programs/accessories/entertainment/volume control. Windows 7
and later, I think things are a bit different but they're still in
there. Just set the system volume up until just before it distorts on
your radio.


Someone who knows more than I about that transmitter, may be able to
point you to a deviation adjustment if there is one.


Howard



On 2/25/2019 7:03 PM, Tom Kaufman wrote:
Hello Howard: I'll see if I can do that! Thanks for the tip! You might want to give me some pointers as to how to adjust the output on the soundcard (running Windows 7 if that helps!"
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Monday, February 25, 2019 7:40 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Yes Tom, you're doing it the way I would. With the control on the
transmitter all the way up, set your sound card output just a bit less
than distortion. That's probably all you can do. I don't know if there
is an adjustment in the transmitter for deviation. If so, that might be
the next thing to try.


Howard

On 2/24/2019 11:11 PM, Tom Kaufman wrote:
Yes...using the volume control on the side of the transmitter. Now when you say " driving it harder from the soundcard" do you mean "turning up the system volume (or speaker volume?" Since the boom box that I keep in the kitchen has a considerable amount of volume (more than that little ole clock radio I keep in the bathroom) I can make it work! But if I'm in the bathroom and am using that clock radio to listen to while I'm in the shower, sometimes it's harder to hear it (and the volume control on the clock radio is as loud as it can go!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Sunday, February 24, 2019 11:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Are you using the volume control on the side of the transmitter; as
opposed to just driving it harder from the sound card? Mine seems to
have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman
















Re: CC-Crane Transmitter Question

Tom Kaufman
 

Howard: I first thought this may be achieved by adjusting the speaker volume that is on the keyboard of my computer! Now if I understand you correctly, this is not the case...correct? Also, just so I understood you correctly, you're saying I need to turn the volume of the transmitter up all the way...then adjust the output of the soundcard? OOr do I have that backwards?
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Monday, February 25, 2019 8:48 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Any sound card I've ever used is controlled via software. In windows xp
it was in programs/accessories/entertainment/volume control. Windows 7
and later, I think things are a bit different but they're still in
there. Just set the system volume up until just before it distorts on
your radio.


Someone who knows more than I about that transmitter, may be able to
point you to a deviation adjustment if there is one.


Howard



On 2/25/2019 7:03 PM, Tom Kaufman wrote:
Hello Howard: I'll see if I can do that! Thanks for the tip! You might want to give me some pointers as to how to adjust the output on the soundcard (running Windows 7 if that helps!"
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Monday, February 25, 2019 7:40 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Yes Tom, you're doing it the way I would. With the control on the
transmitter all the way up, set your sound card output just a bit less
than distortion. That's probably all you can do. I don't know if there
is an adjustment in the transmitter for deviation. If so, that might be
the next thing to try.


Howard

On 2/24/2019 11:11 PM, Tom Kaufman wrote:
Yes...using the volume control on the side of the transmitter. Now when you say " driving it harder from the soundcard" do you mean "turning up the system volume (or speaker volume?" Since the boom box that I keep in the kitchen has a considerable amount of volume (more than that little ole clock radio I keep in the bathroom) I can make it work! But if I'm in the bathroom and am using that clock radio to listen to while I'm in the shower, sometimes it's harder to hear it (and the volume control on the clock radio is as loud as it can go!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Sunday, February 24, 2019 11:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Are you using the volume control on the side of the transmitter; as
opposed to just driving it harder from the sound card? Mine seems to
have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman














Re: CC-Crane Transmitter Question

Howard Traxler <howard@...>
 

Any sound card I've ever used is controlled via software.  In windows xp it was in programs/accessories/entertainment/volume control.  Windows 7 and later, I think things are a bit different but they're still in there.  Just set the system volume up  until just before it distorts on your radio.


Someone who knows more than I about that transmitter, may be able to point you to a deviation adjustment if there is one.


Howard

On 2/25/2019 7:03 PM, Tom Kaufman wrote:
Hello Howard: I'll see if I can do that! Thanks for the tip! You might want to give me some pointers as to how to adjust the output on the soundcard (running Windows 7 if that helps!"
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Monday, February 25, 2019 7:40 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Yes Tom, you're doing it the way I would. With the control on the
transmitter all the way up, set your sound card output just a bit less
than distortion. That's probably all you can do. I don't know if there
is an adjustment in the transmitter for deviation. If so, that might be
the next thing to try.


Howard

On 2/24/2019 11:11 PM, Tom Kaufman wrote:
Yes...using the volume control on the side of the transmitter. Now when you say " driving it harder from the soundcard" do you mean "turning up the system volume (or speaker volume?" Since the boom box that I keep in the kitchen has a considerable amount of volume (more than that little ole clock radio I keep in the bathroom) I can make it work! But if I'm in the bathroom and am using that clock radio to listen to while I'm in the shower, sometimes it's harder to hear it (and the volume control on the clock radio is as loud as it can go!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Sunday, February 24, 2019 11:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Are you using the volume control on the side of the transmitter; as
opposed to just driving it harder from the sound card? Mine seems to
have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman













Re: CC-Crane Transmitter Question

Tom Kaufman
 

Hello Howard: I'll see if I can do that! Thanks for the tip! You might want to give me some pointers as to how to adjust the output on the soundcard (running Windows 7 if that helps!"
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Monday, February 25, 2019 7:40 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Yes Tom, you're doing it the way I would. With the control on the
transmitter all the way up, set your sound card output just a bit less
than distortion. That's probably all you can do. I don't know if there
is an adjustment in the transmitter for deviation. If so, that might be
the next thing to try.


Howard

On 2/24/2019 11:11 PM, Tom Kaufman wrote:
Yes...using the volume control on the side of the transmitter. Now when you say " driving it harder from the soundcard" do you mean "turning up the system volume (or speaker volume?" Since the boom box that I keep in the kitchen has a considerable amount of volume (more than that little ole clock radio I keep in the bathroom) I can make it work! But if I'm in the bathroom and am using that clock radio to listen to while I'm in the shower, sometimes it's harder to hear it (and the volume control on the clock radio is as loud as it can go!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Sunday, February 24, 2019 11:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Are you using the volume control on the side of the transmitter; as
opposed to just driving it harder from the sound card? Mine seems to
have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman










Re: CC-Crane Transmitter Question

Howard Traxler <howard@...>
 

Yes Tom, you're doing it the way I would.  With the control on the transmitter all the way up, set your sound card output just a bit less than distortion.  That's probably all you can do.  I don't know if there is an adjustment in the transmitter for deviation.  If so, that might be the next thing to try.


Howard

On 2/24/2019 11:11 PM, Tom Kaufman wrote:
Yes...using the volume control on the side of the transmitter. Now when you say " driving it harder from the soundcard" do you mean "turning up the system volume (or speaker volume?" Since the boom box that I keep in the kitchen has a considerable amount of volume (more than that little ole clock radio I keep in the bathroom) I can make it work! But if I'm in the bathroom and am using that clock radio to listen to while I'm in the shower, sometimes it's harder to hear it (and the volume control on the clock radio is as loud as it can go!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Sunday, February 24, 2019 11:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Are you using the volume control on the side of the transmitter; as
opposed to just driving it harder from the sound card? Mine seems to
have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman









Re: re using winamp with another soundcard?

Steve Matzura
 

I'd add the following:


After opening the preferences dialog, press O for Output, then immediately press Alt plus C for configure.


After choosing your new audio interface, there's an Apply button in the Configure dialog which you should probably press first, then tab to and press OK, then tab to the Close button and press it, which will close the Preferences dialog.


Re: re using winamp with another soundcard?

stewartross
 

hi thanks for all your help on this
from stew

----- Original Message -----
From: "Barry Chapman" <barry@bchapman.id.au>
To: <all-audio@groups.io>
Sent: Monday, February 25, 2019 7:31 PM
Subject: Re: [all-audio] re using winamp with another soundcard?


You can choose different sound cards for the output from Winamp.
1. Press ctrl+p for preferences and arrow up or down to plugins. If it is
closed, press right arrow to open it.
2. Arrow down to output.
3. Tab to configure and press space.
4. Tab once and you should be able to arrow up or down through a list of
available sound cards.
5. Choose the one you want, then tab to either ok or close and press enter.
6. Tab to close and press enter.

Regards,
Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross
Sent: Monday, 25 February 2019 11:39 PM
To: all-audio@groups.io
Subject: [all-audio] re using winamp with another soundcard?

hi
i want to plug my sound card in to my mixer
is it possible to put winamp threw that soundcard that pluged in to the
mixer?
from stew
----- Original Message -----
From: "Dean Martineau" <topdot@gmail.com>
To: <all-audio@groups.io>
Sent: Monday, February 25, 2019 12:36 PM
Subject: Re: [all-audio] Winamp with my Windows 10


Unfortunately, my Winamp 5.66 Build 3516 always opens in the background
when
I click on an mp3 file on this Win10 system, and Barry's setting is
already
in place.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Barry Chapman
Sent: Saturday, February 23, 2019 8:07 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Winamp with my Windows 10

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the
playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.













Re: re using winamp with another soundcard?

Barry Chapman
 

You can choose different sound cards for the output from Winamp.
1. Press ctrl+p for preferences and arrow up or down to plugins. If it is
closed, press right arrow to open it.
2. Arrow down to output.
3. Tab to configure and press space.
4. Tab once and you should be able to arrow up or down through a list of
available sound cards.
5. Choose the one you want, then tab to either ok or close and press enter.
6. Tab to close and press enter.

Regards,
Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross
Sent: Monday, 25 February 2019 11:39 PM
To: all-audio@groups.io
Subject: [all-audio] re using winamp with another soundcard?

hi
i want to plug my sound card in to my mixer
is it possible to put winamp threw that soundcard that pluged in to the
mixer?
from stew
----- Original Message -----
From: "Dean Martineau" <topdot@gmail.com>
To: <all-audio@groups.io>
Sent: Monday, February 25, 2019 12:36 PM
Subject: Re: [all-audio] Winamp with my Windows 10


Unfortunately, my Winamp 5.66 Build 3516 always opens in the background
when
I click on an mp3 file on this Win10 system, and Barry's setting is
already
in place.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Barry Chapman
Sent: Saturday, February 23, 2019 8:07 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Winamp with my Windows 10

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the
playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.









re using winamp with another soundcard?

stewartross
 

hi
i want to plug my sound card in to my mixer
is it possible to put winamp threw that soundcard that pluged in to the mixer?
from stew

----- Original Message -----
From: "Dean Martineau" <topdot@gmail.com>
To: <all-audio@groups.io>
Sent: Monday, February 25, 2019 12:36 PM
Subject: Re: [all-audio] Winamp with my Windows 10


Unfortunately, my Winamp 5.66 Build 3516 always opens in the background when
I click on an mp3 file on this Win10 system, and Barry's setting is already
in place.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Barry Chapman
Sent: Saturday, February 23, 2019 8:07 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Winamp with my Windows 10

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.








Re: Winamp with my Windows 10

Dean Martineau <topdot@...>
 

Unfortunately, my Winamp 5.66 Build 3516 always opens in the background when
I click on an mp3 file on this Win10 system, and Barry's setting is already
in place.

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Barry Chapman
Sent: Saturday, February 23, 2019 8:07 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Winamp with my Windows 10

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.


Re: CC-Crane Transmitter Question

Tom Kaufman
 

Yes...using the volume control on the side of the transmitter. Now when you say " driving it harder from the soundcard" do you mean "turning up the system volume (or speaker volume?" Since the boom box that I keep in the kitchen has a considerable amount of volume (more than that little ole clock radio I keep in the bathroom) I can make it work! But if I'm in the bathroom and am using that clock radio to listen to while I'm in the shower, sometimes it's harder to hear it (and the volume control on the clock radio is as loud as it can go!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Sunday, February 24, 2019 11:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Are you using the volume control on the side of the transmitter; as
opposed to just driving it harder from the sound card? Mine seems to
have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman





Re: CC-Crane Transmitter Question

Howard Traxler <howard@...>
 

Are you using the volume control on the side of the transmitter; as opposed to just driving it harder from the sound card?  Mine seems to have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman




CC-Crane Transmitter Question

Tom Kaufman
 

Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman


Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Brian Olesen
 

Folks,
If you love bassy music this baby definitely is worth the money. But don't leen too much on such a demonstration cause it's extremely difficult to record a loutspeaker.


-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Evan Reese
Sendt: 24. februar 2019 01:01
Til: all-audio@groups.io
Emne: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Yes, that's $600 U.S. Okay, actually, $599 U.S., but yes, I live in Ohio, so when I go to Amazon, all prices are in U.S. dollars.
Evan

-----Original Message-----
From: Hamit Campos
Sent: Saturday, February 23, 2019 6:56 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

With all due respect. Maybe then the LS-14 mics didn't do it much justice. It did sound good. But well I'm not sure about $600 good. I'll take another listen perhaps but woe dude. That's $600 US right?

On 2/23/2019 6:52 PM, Evan Reese wrote:
It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message----- From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered
Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker
sounds like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ
24-bit Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0











Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Dane Trethowan <grtdane@...>
 

Well here's a link that tells you what the Denon Heos 7 is and how it stacks up.
The review could be a little more detailed I think but then again reviews have to be easily read and understood.
The price is interesting. I paid $750 for mine back in June last year I think it was so I've been enjoying the Heos 7 for quite some time.
Anyway here's the review at https://www.whathifi.com/denon/heos/multi-room/review

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Evan Reese
Sent: Sunday, 24 February 2019 10:52 AM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message-----
From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker
sounds like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ
24-bit Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0





Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Dane Trethowan <grtdane@...>
 

It certainly is.

On 24 Feb 2019, at 10:52 am, Evan Reese <mentat1@dslextreme.com> wrote:

It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message----- From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0











Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Dane Trethowan <grtdane@...>
 

The Denon Heos Speaker isn’t bad for what it is, cheaper than a Sonos Play 7 and - according to many reviews - sounding better and certainly able to handle more audio formats.

On 24 Feb 2019, at 9:33 am, Hamit Campos <hamitcampos@gmail.com> wrote:

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0






Re: Winamp with my Windows 10

Barry Chapman
 

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.


Winamp with my Windows 10

Milton Ota <mota1252@...>
 

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after the other and not keep repeating the currently playing mp3 in the playlist.

What I want is all the mp3 files to play in order that they are listed and when it reaches the last mp3 file it will repeat playing the entire playlist over again.

I found the keyboard command R to turn repeat on/off but that is only either repeating the currently playing track/mp3 file in the playlist or it will only play the currently playing mp3 file from the play and ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does anyone know when the final release will be available?

thanks for all your help in advance.

1861 - 1880 of 3896