Date   
Re: CC-Crane Transmitter Question

Howard Traxler <howard@...>
 

Yes Tom, you're doing it the way I would.  With the control on the transmitter all the way up, set your sound card output just a bit less than distortion.  That's probably all you can do.  I don't know if there is an adjustment in the transmitter for deviation.  If so, that might be the next thing to try.


Howard

On 2/24/2019 11:11 PM, Tom Kaufman wrote:
Yes...using the volume control on the side of the transmitter. Now when you say " driving it harder from the soundcard" do you mean "turning up the system volume (or speaker volume?" Since the boom box that I keep in the kitchen has a considerable amount of volume (more than that little ole clock radio I keep in the bathroom) I can make it work! But if I'm in the bathroom and am using that clock radio to listen to while I'm in the shower, sometimes it's harder to hear it (and the volume control on the clock radio is as loud as it can go!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Sunday, February 24, 2019 11:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Are you using the volume control on the side of the transmitter; as
opposed to just driving it harder from the sound card? Mine seems to
have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman








Re: re using winamp with another soundcard?

Steve Matzura
 

I'd add the following:


After opening the preferences dialog, press O for Output, then immediately press Alt plus C for configure.


After choosing your new audio interface, there's an Apply button in the Configure dialog which you should probably press first, then tab to and press OK, then tab to the Close button and press it, which will close the Preferences dialog.

Re: re using winamp with another soundcard?

stewartross
 

hi thanks for all your help on this
from stew

----- Original Message -----
From: "Barry Chapman" <barry@...>
To: <all-audio@groups.io>
Sent: Monday, February 25, 2019 7:31 PM
Subject: Re: [all-audio] re using winamp with another soundcard?


You can choose different sound cards for the output from Winamp.
1. Press ctrl+p for preferences and arrow up or down to plugins. If it is
closed, press right arrow to open it.
2. Arrow down to output.
3. Tab to configure and press space.
4. Tab once and you should be able to arrow up or down through a list of
available sound cards.
5. Choose the one you want, then tab to either ok or close and press enter.
6. Tab to close and press enter.

Regards,
Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross
Sent: Monday, 25 February 2019 11:39 PM
To: all-audio@groups.io
Subject: [all-audio] re using winamp with another soundcard?

hi
i want to plug my sound card in to my mixer
is it possible to put winamp threw that soundcard that pluged in to the
mixer?
from stew
----- Original Message -----
From: "Dean Martineau" <topdot@...>
To: <all-audio@groups.io>
Sent: Monday, February 25, 2019 12:36 PM
Subject: Re: [all-audio] Winamp with my Windows 10


Unfortunately, my Winamp 5.66 Build 3516 always opens in the background
when
I click on an mp3 file on this Win10 system, and Barry's setting is
already
in place.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Barry Chapman
Sent: Saturday, February 23, 2019 8:07 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Winamp with my Windows 10

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the
playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.












Re: re using winamp with another soundcard?

Barry Chapman
 

You can choose different sound cards for the output from Winamp.
1. Press ctrl+p for preferences and arrow up or down to plugins. If it is
closed, press right arrow to open it.
2. Arrow down to output.
3. Tab to configure and press space.
4. Tab once and you should be able to arrow up or down through a list of
available sound cards.
5. Choose the one you want, then tab to either ok or close and press enter.
6. Tab to close and press enter.

Regards,
Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross
Sent: Monday, 25 February 2019 11:39 PM
To: all-audio@groups.io
Subject: [all-audio] re using winamp with another soundcard?

hi
i want to plug my sound card in to my mixer
is it possible to put winamp threw that soundcard that pluged in to the
mixer?
from stew
----- Original Message -----
From: "Dean Martineau" <topdot@...>
To: <all-audio@groups.io>
Sent: Monday, February 25, 2019 12:36 PM
Subject: Re: [all-audio] Winamp with my Windows 10


Unfortunately, my Winamp 5.66 Build 3516 always opens in the background
when
I click on an mp3 file on this Win10 system, and Barry's setting is
already
in place.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Barry Chapman
Sent: Saturday, February 23, 2019 8:07 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Winamp with my Windows 10

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the
playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.








re using winamp with another soundcard?

stewartross
 

hi
i want to plug my sound card in to my mixer
is it possible to put winamp threw that soundcard that pluged in to the mixer?
from stew

----- Original Message -----
From: "Dean Martineau" <topdot@...>
To: <all-audio@groups.io>
Sent: Monday, February 25, 2019 12:36 PM
Subject: Re: [all-audio] Winamp with my Windows 10


Unfortunately, my Winamp 5.66 Build 3516 always opens in the background when
I click on an mp3 file on this Win10 system, and Barry's setting is already
in place.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Barry Chapman
Sent: Saturday, February 23, 2019 8:07 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Winamp with my Windows 10

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.







Re: Winamp with my Windows 10

Dean Martineau <topdot@...>
 

Unfortunately, my Winamp 5.66 Build 3516 always opens in the background when
I click on an mp3 file on this Win10 system, and Barry's setting is already
in place.

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Barry Chapman
Sent: Saturday, February 23, 2019 8:07 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Winamp with my Windows 10

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.

Re: CC-Crane Transmitter Question

Tom Kaufman
 

Yes...using the volume control on the side of the transmitter. Now when you say " driving it harder from the soundcard" do you mean "turning up the system volume (or speaker volume?" Since the boom box that I keep in the kitchen has a considerable amount of volume (more than that little ole clock radio I keep in the bathroom) I can make it work! But if I'm in the bathroom and am using that clock radio to listen to while I'm in the shower, sometimes it's harder to hear it (and the volume control on the clock radio is as loud as it can go!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Howard Traxler
Sent: Sunday, February 24, 2019 11:09 PM
To: all-audio@groups.io
Subject: Re: [all-audio] CC-Crane Transmitter Question

Are you using the volume control on the side of the transmitter; as
opposed to just driving it harder from the sound card? Mine seems to
have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman




Re: CC-Crane Transmitter Question

Howard Traxler <howard@...>
 

Are you using the volume control on the side of the transmitter; as opposed to just driving it harder from the sound card?  Mine seems to have less volume, also, but it has been tollerable.


Howard

On 2/24/2019 9:38 PM, Tom Kaufman wrote:
Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman



CC-Crane Transmitter Question

Tom Kaufman
 

Hello list: I have one of those transmitters that came from C-Crane running
through my computer in order that I may listen to something that is on my
computer in another room. Here of late, I have found that I can't quite get
the volume that I feel I should get (this is not to be confused with signal)
it still will transmit the signal all throughout the house just as it used
to; the problem is, if I try and get it to where the volume is of the same
level as any other radio station, I have distortion (makes the s's sound
like they might sound if you have an AM" station tuned slightly
off-frequency! Is there anything I can do to alleviate this problem? It's
to the point where.let's say I'm listening while I am taking a show (I have
a little clock radio in there that I sometimes will listen to) but while I'm
in the shower, I have to have that radio turned up all the way (this didn't
used to be and I don't understand what has happened; why it is that the
transmitter is not allowing me to give it the volume it needs! Now this
transmitter is one I got in 2004, so maybe it is simply that it is "wearing
out" anyhow if someone knows of what the problem may be, please feel free to
put it out here? Am running a Dell computer and I think the soundcard is a
Realtech, if this info is of any help!

Thanks for whatever info you may have!

Tom Kaufman

Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Brian Olesen
 

Folks,
If you love bassy music this baby definitely is worth the money. But don't leen too much on such a demonstration cause it's extremely difficult to record a loutspeaker.


-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Evan Reese
Sendt: 24. februar 2019 01:01
Til: all-audio@groups.io
Emne: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Yes, that's $600 U.S. Okay, actually, $599 U.S., but yes, I live in Ohio, so when I go to Amazon, all prices are in U.S. dollars.
Evan

-----Original Message-----
From: Hamit Campos
Sent: Saturday, February 23, 2019 6:56 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

With all due respect. Maybe then the LS-14 mics didn't do it much justice. It did sound good. But well I'm not sure about $600 good. I'll take another listen perhaps but woe dude. That's $600 US right?

On 2/23/2019 6:52 PM, Evan Reese wrote:
It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message----- From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered
Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker
sounds like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ
24-bit Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0










Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Dane Trethowan <grtdane@...>
 

Well here's a link that tells you what the Denon Heos 7 is and how it stacks up.
The review could be a little more detailed I think but then again reviews have to be easily read and understood.
The price is interesting. I paid $750 for mine back in June last year I think it was so I've been enjoying the Heos 7 for quite some time.
Anyway here's the review at https://www.whathifi.com/denon/heos/multi-room/review

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Evan Reese
Sent: Sunday, 24 February 2019 10:52 AM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message-----
From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker
sounds like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ
24-bit Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0




Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Dane Trethowan <grtdane@...>
 

It certainly is.

On 24 Feb 2019, at 10:52 am, Evan Reese <mentat1@...> wrote:

It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message----- From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0










Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Dane Trethowan <grtdane@...>
 

The Denon Heos Speaker isn’t bad for what it is, cheaper than a Sonos Play 7 and - according to many reviews - sounding better and certainly able to handle more audio formats.

On 24 Feb 2019, at 9:33 am, Hamit Campos <hamitcampos@...> wrote:

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0





Re: Winamp with my Windows 10

Barry Chapman
 

In Winamp:

1. Press ctrl+p for preferences.
2. Arrow up or down to Playlist.
3. Tab to the Advanced Playback Settings Manual playlist advance check box
and make sure that it is not checked.

I hope this helps.

Barry Chapman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Milton
Ota
Sent: Sunday, 24 February 2019 9:20 AM
To: all-audio@groups.io
Subject: [all-audio] Winamp with my Windows 10

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a
m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after
the other and not keep repeating the currently playing mp3 in the playlist.

What I want is all the mp3 files to play in order that they are listed
and when it reaches the last mp3 file it will repeat playing the entire
playlist over again.

I found the keyboard command R to turn repeat on/off but that is only
either repeating the currently playing track/mp3 file in the playlist
or it will only play the currently playing mp3 file from the play and
ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to
just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does
anyone know when the final release will be available?

thanks for all your help in advance.

Winamp with my Windows 10

Milton Ota
 

Hello Listers:

I'm using Winamp 5.8 Build 3660 on a windows 10 system, and playing a m3u playlist file with a series of mp3 files in the playlist file.

I'm trying to get winamp to play through all the mp3 files one after the other and not keep repeating the currently playing mp3 in the playlist.

What I want is all the mp3 files to play in order that they are listed and when it reaches the last mp3 file it will repeat playing the entire playlist over again.

I found the keyboard command R to turn repeat on/off but that is only either repeating the currently playing track/mp3 file in the playlist or it will only play the currently playing mp3 file from the play and ends once the cut is finished.

Is there a keyboard command that I'm missing? Or, is there a command to just repeat the entire m3u playlist file?

Also, is the version of Winamp 5.8 Build 3660 still in beta and does anyone know when the final release will be available?

thanks for all your help in advance.

Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Hamit Campos
 

Ah  okay. Well I'll take another listen. Just to see.

On 2/23/2019 7:00 PM, Evan Reese wrote:
Yes, that's $600 U.S. Okay, actually, $599 U.S., but yes, I live in Ohio, so when I go to Amazon, all prices are in U.S. dollars.
Evan

-----Original Message----- From: Hamit Campos
Sent: Saturday, February 23, 2019 6:56 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

With all due respect. Maybe then the LS-14 mics didn't do it much
justice. It did sound good. But well I'm not sure about $600 good. I'll
take another listen perhaps but woe dude. That's $600 US right?

On 2/23/2019 6:52 PM, Evan Reese wrote:
It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message----- From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0















Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Evan Reese
 

Yes, that's $600 U.S. Okay, actually, $599 U.S., but yes, I live in Ohio, so when I go to Amazon, all prices are in U.S. dollars.
Evan

-----Original Message-----
From: Hamit Campos
Sent: Saturday, February 23, 2019 6:56 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

With all due respect. Maybe then the LS-14 mics didn't do it much
justice. It did sound good. But well I'm not sure about $600 good. I'll
take another listen perhaps but woe dude. That's $600 US right?

On 2/23/2019 6:52 PM, Evan Reese wrote:
It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message----- From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0










Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Hamit Campos
 

With all due respect. Maybe then the LS-14 mics didn't do it much justice. It did sound good. But well I'm not sure about $600 good. I'll take another listen perhaps but woe dude. That's $600 US right?

On 2/23/2019 6:52 PM, Evan Reese wrote:
It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message----- From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0









Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Evan Reese
 

It had better be for $600, which is what Amazon wants for one.
Evan

-----Original Message-----
From: Hamit Campos
Sent: Saturday, February 23, 2019 5:33 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Wow pretty good speaker.

On 2/23/2019 2:04 PM, Dane Trethowan wrote:
Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://www.dropbox.com/s/e6ld33prfi6oypq/Denon%20Heos%207.mp3?dl=0




Re: Sample of the Denon Heos 7 HS2 Powered Network Speaker

Steve Jacobson
 

Maybe I missed a description of the speaker, but how would one know if the
bass not being centered was the speaker or the particular performance?

Best regards,

Steve Jacobson

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Evan Reese
Sent: Saturday, February 23, 2019 1:21 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network
Speaker

It does sound pretty good, but the bass is off to the right instead of
centered, which would cause me to not want to use it.
Evan

-----Original Message-----
From: Dane Trethowan
Sent: Saturday, February 23, 2019 2:04 PM
To: all-audio@groups.io
Subject: [all-audio] Sample of the Denon Heos 7 HS2 Powered Network Speaker

Okay for what its worth.

Here's a sample of what the Denon Heos 7 HS2 Network powered speaker sounds
like which I think perfectly reasonable.

The source material is the Up Tempo Smooth Jazz Radiotunes channel.

Note this sample has been compressed to MP3 from the original 96KHZ 24-bit
Wave sample.

https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.dropbo
x.com%2Fs%2Fe6ld33prfi6oypq%2FDenon%2520Heos%25207.mp3%3Fdl%3D0&amp;data=02%
7C01%7C%7Ccd343ff4c8cd476c5d3508d699c40511%7C84df9e7fe9f640afb435aaaaaaaaaaa
a%7C1%7C0%7C636865464502208148&amp;sdata=UJDPLkL8cE0%2FpxUmhoq9oPFg09EuKKMH9
paQlFaiU8A%3D&amp;reserved=0