Re: a couple of questions re at8022 and at4022


frank cuta
 

I believe these warnings are to prevent damage that might occur by plugging
the 8022 in while the power is on. This is the case for any condenser. My
guess is that it works fine on phantom power without the battery and in fact
if you look closely at the spec sheet there may be a separate set of specs
for phantom power operation and they may be augmented.


Speaking of the H6 I would greatly appreciate it if someone could send us
their notes on how to make various changes in the menu based parameters.
There is a lot that can be accomplished by just counding the number of
clicks and its crazy that each of us with an H6 has to figure it out
independently with sighted help and make our own notes.

Thanks
Frank

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Hamit
Campos
Sent: Thursday, July 30, 2020 6:48 AM
To: all-audio@groups.io
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hi Andy and Gena. Just to clarify a few things. Andy the 4022 is a
completely different mike from the 2 we're discussing here. I'm sure you
ment 2022 and typed 4 by axident. But the 4022 is the omni brother of
the 4021 which is what the 8022 is based on. Now to the subject at hand.
Yes the 2022 is battery operated only thus phantum indeed could damage
it. As for the AT-8022 it came with a double A I'm sure Andy. You don't
necessarily need phantom for the 8022 if you didn't want it. Sure if you
are using it with XLRs it's best to do so to get the full beniphat of
the mic. But also this mic comes with a mini XLR to 3.5 jack cable. This
Andy is so you could use it with the DS-50 or something like that. But
it is mainly for using the 8022 with a camera. You can mount the 8022 on
a DSLR camera. As you can the H6. There ya go just wanted to clear
things up. Andy just sent you a seperate message on how to turn phantom
on and how to link the tracks. Note the XLRs that go into the H6 are
different collors. Have your wife figure out which collor is which
channal. I forget right now. I will say this though left goes towards
the front of the H6 meaning in the XLR near where you snap on the snap
off mics and in this case the right goes into the XLR near the menu
levor. Just so as you know same applys to the left XLRs. Track 1 left
channal is the XLR near the opening for the snap offs and the XLR near
in that case to the card reader is Track 2 or right channal. I'd really
love to hear the 8022 on the F8N though to see what it sounds like on
truely pro gear.

On 7/30/2020 8:58 AM, Andy via groups.io wrote:
Hi again Gena.

Yes Gena.

I've bought a pair of at 8022's and an AT 2022.

Incidentally, a Youtube demo warns that never should the AT2022 be
plugged into an XLr with Phantom turned on or the mic will be killed. 
The 2022 has it's own power in the form of a 1.5 Duracell battery.

The AT 8022 does require Phantom so these XLR's should be supplied
with power., but how much power?

Very best wishes.

Andy.


----- Original Message ----- From: "Georgina Joyce" <gena@gena-j.me.uk>
To: <all-audio@groups.io>
Sent: Thursday, July 30, 2020 1:08 PM
Subject: Re: [all-audio] a couple of questions re at8022 and at4022


Hello Andy,

Yes, they are indeed condenser mics so need power. Did you say you got
new ones?

Regards,

Gena
On 30 Jul 2020, at 10:32, Andy via groups.io
<meikle.aiden=btinternet.com@groups.io> wrote:

Hi Hamit and all.

Just a couple of questions guys regarding the at 8022 and  the at 4022.

I've taken Hamit's advice regarding his view that 2 at8022's placed 
apart in an x y form will give me a broader stereo field rather then
1 microphone.

I decided this because when recording my local  7 piece  band the
sound source is quite wide.

So I've a lovely new pair of these.

Now am I correct in thinking that these mics require Phantom power?

If so, dealing with the H6 first, I could allocate channels and 4 for
these micks and turn Phantom power on?

In terms of channels 1 and 2, I turn Phantom power off completely as
I'm intending to allocate these channels to my new at 2022, which
should arrive next week

These will satisfy  my Dawn Chorus birdcall recordings.

I need to set up the H6, not even going near the F8N until I've
sorted out the H6.

Any advice would be very helpful.

As my sighted wife will be following your suggestions, it would be
nice for an idiots guide because she has absolutely no interest in
recording.


Hoping everyone is fine and looking after themselves.

Very best wishes.

Andy.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS











-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4855 / Virus Database: 4793/15883 - Release Date: 08/14/18
Internal Virus Database is out of date.

Join all-audio@groups.io to automatically receive all group messages.