Re: Zoom marker function in firmware 2.30


Aidan
 

Well, yes they actually appear in the file. Even if pre record is
turned off, as soon as the sound marker is turned on, then you get
them in the file. I tested that by not having headphones plugged in,
then press record on h1n, I heard nothing but when stopt a few seconds
later and played I can here them loud and clear also just before you
press stop they also appear.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah interesting that doesn't add up. But I guess again as you said maybe
they are in the file for lining up with the video. So do you get them in
the file even if you don't have pre record on? From what you're
suggesting I guess perhaps but let me know. But yeah that is odd. Sounds
like it's actually incoding them into the file and not just making
beeping sounds like the Olympus recorders. I don't know if the F 1s do
what you're describing. Hope not. Well we'll see I guess when I first
get the thing to write to the card again. But yes I'll ask Abby to turn
it on.

On 5/21/2020 3:53 PM, Aidan wrote:
It seems to behave the same as on the h1n, wich I do have, and there
its much easyer to turn them on/off, but I don't like the fact that
they appear in the file. Yes, its fru the headphones only, but when
playback the file the beeps are in there. So you have to cut them out.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah you found it Gena. So I was right then you have to set them then.
Where was it? I'll see if Abby can help me turn them on. Now you said
something about it's all over your recordings. Does it come over the
speaker as well then? Because again compairing with the F recorders on
those you get it in the headphone jack. Only over the headphones as I've
been lead to understand.

On 5/21/2020 3:37 PM, Georgina Joyce wrote:
Hello All,

I can confirm that beeps do sound on record and stop with the 2.30
firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording
menu. The bottom of the list is Sound markers. When you enter that menu
there are strange options which didn’t make any sense to me initially.
Then I found in the mode menu option there are 3 options. Off which is
the
default. Then Record and the bottom option Recorde and stop. They are
quite long loud beeps by default. But the menu has configurable
options.

But is it useful to us? The stop only works when stopping a recording
not
playback. As its function is to synchronise filming. The recording
starts
with the loud bleep. So all recordings will need editing. So you can
make
up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73






Join all-audio@groups.io to automatically receive all group messages.