On 15 May 2020, at 22:35, John Covici <covici@...> wrote:

OK, what is a cloud lifter?

On Fri, 15 May 2020 15:53:00 -0400,
Georgina Joyce wrote:

Hello,

Providing we are talking about XLR connected mics and have access to fantom power. Don’t forget the fethead an alternative to the cloud lifter. They also do one for condenser mics.

Regards,

On 15 May 2020, at 19:38, frank cuta <cuta@...> wrote:

There are several ways to reduce noise. You can start with the NT1A, you
can switch from the H6 to the F8N which has a lot more noise free gain or
you can stick with a mic of your choice and the H6 and buy a cloud lifter.

Frank



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Hamit
Campos
Sent: Thursday, May 14, 2020 7:39 AM
To: all-audio@groups.io
Subject: Noise floor


Ah good. It's a great podcast. What I love most is that it's the 1 pod
cast where he uses the NT1-A the most.

On 5/14/2020 10:36 AM, Georgina Joyce wrote:

Hello Andy,

Really appreciated. I have got it and now put it on my Trek.

Thank you.

On 14 May 2020, at 14:31, Andy via groups.io

<meikle.aiden@...> wrote:

Hi Georgena, Hamit and list.

Gena asked for Neals Review. Are we talking about BSM binaural

microphones or the H6.

If the latter, you can get it at here:

Sendspace.

https://www.sendspace.com/file/xogibu

I've a number of Neals podcasts from BCT but not them all.

Hamit you said that Dane had them.

You could not provide me with his e-mail address so I can ask for some or

all of them if possible.

I discovered years ago that Neal rarelly replies to messages. Perhaps

I'll try again.

Rick Harmon held the BCT Archieve at on time. Perhaps I'll drop the big

guy a wee message and see if he has retained any of them.

Very best wishes.

Andy.



----- Original Message ----- From: "Hamit Campos" <hamitcampos@...>
To: <all-audio@groups.io>
Sent: Thursday, May 14, 2020 1:43 PM
Subject: Re: [all-audio] Recording from recorders like Zoom - How would

you do it?

Ah Neal Ewers. Yes he is a studio person from Madison Wisconsin. He use

to do reviews on Blind cool tech. His site is www.ravenswood.org I don't
know what happened to his reviews page and his H6 review is pretty big. On

On 5/14/2020 7:50 AM, Georgina Joyce wrote:

Hello Andy and Hamit,

Who is this Neil, can you point to his review?

All electronic devices make a noise but most of them are out of our

hearing range. An amplifier does make a noise especially when it is cranked
up to it's maximum. The Zoom 6 pre-amps are known for being noisy. So can
you quote Neil saying that the Zoom 6 preamps are not noisy?

Andy you can hear the pre-amp hiss on your bird recording. There are 2

ways you could eliminate or at least reduce that hiss if you wanted. That I
know of.

Regards,

On 14 May 2020, at 10:08, Andy via groups.io

<meikle.aiden@...> wrote:

Hi Guys.

You may remember within his H6 Review, Neal stated "I would not know

just how to measure the Floor noise , because there doesent seem to be one!

Andy.

know ----- Original Message ----- From: "Hamit Campos"

<hamitcampos@... <mailto:hamitcampos@...>>

To: <all-audio@groups.io <mailto:all-audio@groups.io>>
Sent: Wednesday, May 13, 2020 7:34 PM
Subject: Re: [all-audio] Recording from recorders like Zoom - How

would you do it?

Ah yeah than 35 must be the 1 Neal sent. He sent it to the Reaper

list. I've yet to finish that 1.

On 5/13/2020 12:17 PM, Georgina Joyce wrote:

Hello Hamit,

No 36 is out.

On 13 May 2020, at 17:04, Hamit Campos <hamitcampos@...>

wrote:

Is 35 the newest 1? IF so no I've meant to just haven't gotten to

it. Will do soon though. Thanks for the reminder.

On 5/13/2020 11:13 AM, Georgina Joyce wrote:

Hello Hamit,

Out of interest do you listen to Mosen at large (specifically 35)?

He is singing from the roof about the F6 as it has an iPhone app which is
not perfect but gives access to functions we have never had access to
before.

Regards,

On 13 May 2020, at 16:07, Hamit Campos <hamitcampos@...>

wrote:

Actually Gena there's 1 place where I'll give it to ya. Dynamic

mics. This is also true for the H5 but much much less oddly enough. Same for
the H4N Pro. The H6 in this respect is again as noisy as the Olympus LS-100.
Now can't say on the F6 as no one's demoed dynamics on that yet and Neal
hasn't demoed dynamics on his 744-T so can't say nothing on that either.

On 5/13/2020 11:02 AM, Georgina Joyce wrote:

Hello Aidan,

Well I am picky, there is nothing wrong in getting the best out

of the equipment. The Zoom 6 pre-amps are renowned for their hiss. It would
be useful to share your tips to get the most from the recorder.

Regards,

On 13 May 2020, at 13:52, Aidan <aidan.smarttalk@...>

wrote:

If using something like h6 I cannot really imagine that you

would need

to apply noise filters. Unless you very picky.

On 5/13/20, Georgina Joyce <gena@...> wrote:

Hello Tim,

Interesting, if using a non destructive DAW like reaper, if it

is

incorrectly applied simply undo it. I am not familiar with

using expanders.

But the noise comes from whatever equipment. Very few mics

have a

undetectable noise floor and even the best pre-amps have some

noise. So a

light touch of post processing is likely to be required. But

as you rightly

point out it is down to the environment and what purpose the

recording is to

serve.

Thanks,

On 13 May 2020, at 12:23, tim cumings <thcumings@...>

wrote:

I agree about most of theadvice here. However i would be

careful about

using a noise gate. If set incorrectly, a noise gate can make

things sound

worse than better. A downward expander would be better, but

if you are

using a quality mic and have recording levels set properly,

even a

downward expander probably isn't necessary, depending on what

you are

recording.


On 5/12/2020 5:30 PM, Georgina Joyce wrote:

Hello All,

Rather than making the current discussion on Zoom

Microphones. very long

I thought I would ask the community of their experiences

and how they

undertake a recording? As I was not sure if Andy wanted tips

on recording

techniques I thought such a thread would help him and those

of us who

have a Zoom.

Firstly, I would record in wav. Then use reaper to apply a

noise gate.

This removes hiss and other quiet unwanted noises.

I would not use a capsule on the recorder unless it was the

only mic

available for that application. Using such a mic I would

secure the

recorder and start the recording early so that I could

discard the first

second as it will contain handling noise.

I would not wear noisy clothing or jewellery and try to get

away from the

active recording space. It is surprising how clothing,

shoes and bangles

rustle and jangle when you are trying to be quiet.

Then it is about choosing the mic for the sound stage I am

trying to

capture. Remembering that the wider stage means that I have

to be that

much quieter. It could pick me up breathing and moving my

feet.

Then there are practical considerations such as power for

the Zoom and

protection from wind and rain.

Of the top of my head these are the considerations I would

employ before

a recording. So what about your experiences and approach?

Regards,

Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73

Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73

Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73

Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73

--
This email has been checked for viruses by Avast antivirus

software.

https://www.avast.com/antivirus

Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73

Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73

Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4855 / Virus Database: 4793/15883 - Release Date: 08/14/18
Internal Virus Database is out of date.

Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@... <mailto:covici@...>