Re: Getting my Mac to recognize Zoom H1N as external drive

Aidan
 

Could be yes. Just tell me something else, did you manage the first
screens once you insert batteries, and wich battery type did you
select?

On 7/22/19, Dane Trethowan <grtdane@...> wrote:
Yes you’re absolutely right so I’m wondering if I have a faulty camera kit
here? Camera Kits aren’t expensive items so I’ll order another in a couple
of days.


On 23 Jul 2019, at 12:08 am, Aidan <aidan.smarttalk@...> wrote:

Intresting, as the manual do state it can work with ios.

On 7/22/19, Dane Trethowan <grtdane@...> wrote:
I don’t think so.
As soon as I select use as Sound Device from the recorder I get the “Not
Enough Power” message which I’ve seen on other devices before.


On 22 Jul 2019, at 9:53 pm, Aidan <aidan.smarttalk@...> wrote:

Well, the way I understand it is that with ios, you con't just select
that and off you go, there are more options under the ios section once
you pressed ok on that. Maybe that's the problem.

On 7/21/19, Dane Trethowan <grtdane@...> wrote:
I’m doing some tests with the recorder at the moment.
Unfortunately I can’t get the recorder to work as a microphone with
the
iPhone or iPad mini.
The battery of the iPad Pro was dead flat so I haven’t ben able to try
that
though I suspect the results will be the same which is a pity.


On 22 Jul 2019, at 6:49 am, Aidan <aidan.smarttalk@...> wrote:

I agree. I won't use that allot, but its good to no how to turn it
on/off.

On 7/21/19, Dane Trethowan <grtdane@...> wrote:
I haven't worked that out yet but I will.
I should draw your attention to a few things.
The Pre-Record buffer is only 2 seconds in length.
The buffer may not always work depending on what function of
recording
you
are using, it will not work with the "Countdown Timer" function I
think
its
call.
Given that this recorder is priced as low as it is these minor
oddities
seem
a fair tradeoff and don't affect the recorders prime aim which is to
make
some damn decent quality recordings.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Aidan
Sent: Sunday, 21 July 2019 11:56 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as
external
drive

So, could you figure out how to get pre record switched on or off,
and
when
play back, things like repeat and AB repeat and playback speed?
The manual dos not clearly state button combinations there.

On 7/18/19, Dane Trethowan <grtdane@...> wrote:
As far as I know the only other option available might be for
actually
powering the device itself.
There's no trouble in using the H1N with an IOS device for input
and
output.


-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Aidan
Sent: Friday, 19 July 2019 1:29 AM
To: all-audio@groups.io
Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as
external drive

Thanks dain this is what I always wanted to know. Do you perhaps no
if
there are other options on that USB screen, and how it will work
when
connecting it to ios for sound use.

On 7/17/19, Dane Trethowan <grtdane@...> wrote:
Okay here’s what you do.
You first need to turn the power on for the H1N recorder and wait
until the recorder is booted.
Then connect the USB cable from the recorder to the computer.
At this point the USB connection screen displays on the recorder.
Here’s where you need to use the 4 keys below the display
mentioned
previously so to get to Card Reader press `Limiter key - that’s
the
3rd key from the left - and then press Auto level key - that’s the
right most key on the row, the forth. - You should now be able to
use
the recorder as a USB Card reader.
When finished make sure to “Safely Eject” the H1N from your
computer
system in which ever way your computer handles it.
Now going back to the USB screen for a moment.
If you press the Auto Level key twice then you will set the
recorder
to USB Sound Device mode.
I’ve tried all this on both a Mac and Windows machine.
Hope this helps.


On 17 Jul 2019, at 10:36 pm, Mike Busboom <mbusboom@...>
wrote:

Hi everyone,

can someone tell me how to get my Mac or PC to recognize my Zoom
H1N
as a hard drive?

In terms of nomenclature, I call the horizontal buttons
immediately
below the display, from left to right, H1 through H4. I call the
buttons below the Record button, B1 through B4, with B1 and B2 in
the top row and B3 and
B4 on the bottom row.

What key combination do I need to press in order to make either a
Mac or PC recognize the H1N as a hard drive?

Thanks and all the best,

Mike






























Join all-audio@groups.io to automatically receive all group messages.