airspy@groups.io

How to use the Co-Channel Canceller in SDR# 2

*Some basic background* The plugin locks to the dominant carrier and cancels all the correlated frequency bands around it. If the signal is distorted (which results in bad correlations), it tries to f

*Some basic background* The plugin locks to the dominant carrier and cancels all the correlated frequency bands around it. If the signal is distorted (which results in bad correlations), it tries to fix it using some fancy statistics. *How to use the plugin*

By prog ·

SDR# Updates 24 #announcements

So, instead of having a new topic for every SDR# update, let's try to have a read-only stream with just the bare minimum of information and avoid too much noise. Rev 1760 : Added Peak Hold in the spec

So, instead of having a new topic for every SDR# update, let's try to have a read-only stream with just the bare minimum of information and avoid too much noise. Rev 1760 : Added Peak Hold in the spectrum display. This can be enabled/disabled/reset using a right click on the spectrum. The color of the Peak Hold can be set using spectrumAnalyzer.peakColor. Download link: https://airspy.com/download

By prog ·

Control Scale Request 8

Any way that the scaling used for the Zoom, Contrast, Range and Offset be improved when using the IF and Audio Spectrum? 2 of the 4 sliders are missing. The screen resolution on this particular displa

Any way that the scaling used for the Zoom, Contrast, Range and Offset be improved when using the IF and Audio Spectrum? 2 of the 4 sliders are missing. The screen resolution on this particular display is 1366x768. It's an older AMD A^ / Win8.1 laptop. Thanks! -- Mike

By Mike Bott ·

New Quantum Receiver 14

I'd love to see a new AirSpy product based on this tech: http://www.arrl.org/news/quantum-receiver-can-detect-huge-swath-of-the-rf-spectrum 0-20GHz with one device, and no mention of any need for an a

By BryonB ·

I need help with Airspy Mini and GNU Radio... on Windows 6

Hi, Instead of rtlsdr I want to use airspymini. It works great directly with sdr# BUT it doesnt work with GNU Radio. I tried to change a driver with Zadig. No result There is something as airspylib bu

By Gmail Handmatig Job Geheniau ·

Tuning Option Wish 3

Greetings, I love how SDR# has evolved over the last year. It is now perfect for me with one minor wish. Is is possible to set the main (mouse wheel) tuning speed to whatever digit is selected in the

By densmorekeith ·

More Plugin Patches #announcements

The IF Processor, IF Recorder and Baseband Recorder plugins were patched for .net 5 and are available in the Community Package via the installer.

By prog ·

Airspy SDR# v1.0.0.1810 3

Hi, complete newbie here. I just installed this version of SDR# having used a previous version (1809 I think). My question when I use Airspy Server Network, why can I no longer see the list of users w

By Trevor Rymell ·

Meteor plug-in 2

I'm getting "sample rate too low" when using the Meteor plug-in from the installer. I have the RX bandwidth as 90,000 as before, and whatever sample rate I set the Discovery HF+ to - right up to the m

By David J Taylor ·

Bandwidth display bug? 6

Hi, I found that the bandwidth display in the Source panel is blank every time that I start the program, independently of the sample rate that was selected. If I change the Samplerate to any value the

By EB4APL ·

Loop Experiment "LIL" Low Impedance Loop VS new improved LiLI Shootout 17

Here is the the MF,LF and VLF shoot out between the Lil' "low Impedance Loop" and the new and improved "LiLi" Lower Impedance Low Inductance loop. RX = HF+ Discovery Software = Console V3 https://yout

By Paul Cianciolo ·

Help me understand how SDR front-ends work 31

I have been using an Airspy HF + Discovery for two months. I use it with SDR+. I was impressed with the noise reduction and selectivity. The past 10 days I suddenly get distorted MW stations every 10

By Richard ·

Building and Testing a Large LIL Low Impedance Loop Final Episode

Hello All, I got some time to build a 5' x 5' LIL and located it in the backyard. I works great. No tuning, no external amplifiers, no bias tee, just the loop and the coupler. This the final episode i

By Paul Cianciolo ·

SDR# dotnet 5 Pre-release 131 #announcements

Hello folks, This will be a long email with many levels of technicality, if you just want to try new cool experimental software, jump to the end. So, here we are. We did the big jump to .NET 5 in our

By prog ·

More plugins patched for .Net 5

Should be available via the installer soon.

By prog ·

Meteor Decoder Plugin patched for .Net 5 12

A new build of the Meteor Decoder by Vasili was pushed to the file section of the mailing list and the Community Installer. This build doesn't change the internals beside some minor UI fixes and the s

By prog ·

File Patched plugins for .NET 5 deleted #file-notice

The following files have been deleted from the Files area of the airspy@groups.io group. Patched plugins for .NET 5 By: prog <info@...>

By airspy@groups.io Notification ·

Settings to feed SDR# to DSD+ via 127.0.0.1:20001

My apologies! I've searched dozens of times with several search engines and can't find any documents that answer this question. I want to set up my DSD+ in Passive Monitor mode on port 20001 to decode

By Dale L Puckett ·

OmniRig Snyc not working with FT-891

Having an issue with OmniRig Snyc on my FT-891. The Sync To Rig communication is not working. Sync From Rig works great for both Frequency and Mode. I looked but failed to find anything on this proble

By Michael Johnson ·

Omnirigsync 2

Hallo my name is Svante callsign sm6usu. I use Log4om v2 and Omnirig which installed together with the Log4om. Using a cat cable to my Icom 718 works excellent. Now I waiting for my Airspy sdr hf+ dis

By svante.glose@... ·