airspy@groups.io

How to use the Co-Channel Canceller in SDR# 2

*Some basic background* The plugin locks to the dominant carrier and cancels all the correlated frequency bands around it. If the signal is distorted (which results in bad correlations), it tries to f

*Some basic background* The plugin locks to the dominant carrier and cancels all the correlated frequency bands around it. If the signal is distorted (which results in bad correlations), it tries to fix it using some fancy statistics. *How to use the plugin*

By prog ·

SDR# Updates 24 #announcements

So, instead of having a new topic for every SDR# update, let's try to have a read-only stream with just the bare minimum of information and avoid too much noise. Rev 1760 : Added Peak Hold in the spec

So, instead of having a new topic for every SDR# update, let's try to have a read-only stream with just the bare minimum of information and avoid too much noise. Rev 1760 : Added Peak Hold in the spectrum display. This can be enabled/disabled/reset using a right click on the spectrum. The color of the Peak Hold can be set using spectrumAnalyzer.peakColor. Download link: https://airspy.com/download

By prog ·

Control Scale Request 8

Any way that the scaling used for the Zoom, Contrast, Range and Offset be improved when using the IF and Audio Spectrum? 2 of the 4 sliders are missing. The screen resolution on this particular displa

Any way that the scaling used for the Zoom, Contrast, Range and Offset be improved when using the IF and Audio Spectrum? 2 of the 4 sliders are missing. The screen resolution on this particular display is 1366x768. It's an older AMD A^ / Win8.1 laptop. Thanks! -- Mike

By Mike Bott ·

Does SDR# support CommRadio CR1a? 10

Can SDR# be configured to support I/Q data via USB from the CommRadio CR1a? (Apologies if duplicate post - Submitted several days ago w/o, AFAIK, Topic appearing or Moderator notice of issue...) Thank

By rl3james ·

Firmware update 2

I've had my Airspy for some years now and it works perfectly. With all the changes and improvements in SDR# should I worry about it's firware level or is 'If It Works Don't Fix It' still the best opti

By Duncan G ·

IF_NR window 2

OK, figure how to reproduce this behaviour from the scratch. I did a short video. Youtube unlisted link = https://youtu.be/Nss9-LHvI3Y <https://youtu.be/Nss9-LHvI3Y> Regards MR

By Marcus Ramos ·

Analyzing battery Charger Noise using a LISN Line Impedance Stabilization Network

Anyone who is interested of SWL'ing NDB hunting, DX'ing, or any sort of listen in the LF MF and HF band has run into these cheap battery chargers and the RFI noise havoc they wreak. This video shows a

By Paul Cianciolo ·

IF_NR window 6

Hi ... On V 1807, the Custom IF NR window does not show sliders on its full extent even after resizing it. Pix attached. Regards; Marcus

By Marcus Ramos ·

Need help with my AIRSPY R2 14

Hi i purchased AIRSPY R2 and was working well but after couple of months it stop after seconds of running and hear disconnected sound in windows 10 if I restart the run again it shows error message “a

By abdulkaliq@... ·

Help me fix the embedded spyserver map 2 #win10

Hi, all: Using Spyserver for the first time on my Windows Surface laptop, when invoked, the Spyserver map is coming up blank. Does anyone know of a fix for this? Thank goodness for the web version of

By Curt Faulk ·

Slower spectrum updates? 11

I'm just wondering if it's possible in some config to make the fft spectrum integration speed even longer? The slowest update speed is like once a second now and I'd love to be able to have it update

By Greger Gimseus ·

Instruction Manual 34

Hi, Does anyone know where I can get instructional videos and also tips in general? Any videos? Thanks

By Abner Sadik ·

Is there a change log for SDR#? 6

What are the major differences between revs .1803 and .1807 please ? B.

By rmrrgs ·

Allow non-locked neighor frequency cancellation 3 #request

The co channel cancellation feature could be used to cancel out more than just a signal with carrier. E.g. a narrowband signal or ssb/lsb could be removed from a sw broadcast if you'd allow signal can

By Dennis ·

Wideband preamp losing distant RX? 25

I bought an Uputronics Wideband preamp to use with my R2 and thought it would improve my reception but it seems to actually diminish it. I'll describe my situation in detail and hope someone can offer

By Paulie68 ·

Gain settings gone with Discovery + Spyserver 3 #spyserver #airspydiscovery #sdrsharp

You're new here.

By Dana Myers ·

Frequency Manager Suite update on the way

Thanks you, Youssef. I appreciate your support.

By sdrs.freqmgr@... ·

About 'Signal Diagnostic" tool

Hello ! Is anyone using 'Signal Diagnostic' tool ? With #1807, changing 'integration' from min to max (1 to 300 sec) makes 'power' value update at the same (very fast) speed. It seems "'integration" h

By Patrick ·

Frequency Manager Suite uodate on the way 8

Recent changes to the SDR# software architecture have broken the plugins in FMSuite. I will be updating FMSuite and its accessory applications over the next couple of weeks. I'll post again here when

By sdrs.freqmgr@... ·

Plugin Quality 6

I must say I am new to SDR but have a wide range of knowledge about radio and all that it entails. I have come across an odd thing that I need some help with. The SDR Sharp downloaded from the Airspy

By Natalie ·