Hello All, I have made this Version 2 SDRSharp Plug-In S-Meter available for testing purposes. Pllease do not contact me here on Groups.IO, use my email !!! I am available at (my callsign) at Gmail do

As you may be aware, N1MM+ has provision for using an Airspy HF+ and spyserver fed by the RXOUT/RXIN loop of a K3 to feed a Spectrum Scope. In my case, this is somewhat less useful than it might be be

Hello I’ve been an Airspy user (player/researcher) for years but in the last few months have been having trouble with setting the GAIN for an AIRSPY mini using GnuRadio’s OSMOSDR interface. I’m seeing

Looking for a feature that most closely speaks to the display i am looking for. % Modulation , as alluded too above, monitoring ones own TX signal is very useful/necessary , especially for Older equip

Hi Can I please get tuner lock status(R820T2 register 2, bit 7) in the user-interface of sdrsharp? It would be helpful when tuning near the edges. It could possibly be shown as some warning, red borde

Greetings all, Enjoying the heck out of this YouLoop. Was even able to detect U.S. Navy VLF station NWC in Exmouth, Western Australia at 19.8 kHz, from central Texas. This is a transmit-only station c

Hi Guys I've looked but so far not found a plugin for SDR# which will record (IQ) the whole of the displayed Bandwidth as set/displayed below. Unless I've missed it, all I seem to find are IF recorder

Has anyone else noticed a problem with the SDR# plugin FMS frequency manager+scanner? I'm scanning for three frequencies, and often when a frequency in the scan is active, the scanner actually stops o

In the download page it says that "RaspberryPi" is supported for the ARM SpyServer, so there are several Pi's available. Got “Segmentation Fault” on Raspberry 2 with 256 Mb RAM, ZeroW with 512 Mb RAM

hello everyone, I'm trying to run SpyServer on my RP2. When I launch the server, I get a "segmentation fault" crash. I am running Raspbian Stretch (Linux raspberrypi 4.9.59+ #1047 Sun Oct 29 11:47:10

Starting yesterday I've been having no success connecting to spyservers. Only a few were accepting connections whereas the others showed the "Could not connect to .." message. Today I realized the onl

Folks - Does anyone know the author of the SNR Logger plugin for SDR#? I would like to partner with them on an enhancement. Any leads or referrals would be greatly appreciated. Sincere Thanks! Steve K

Hello, I would like to remotely record the entire baseband IQ data from a HF+ discovery. From what I understand Spyserver would try to send the whole signal bandwidth over the network and the client w

1. I just received an Airspy HF+ dual port yesterday. I have it up and running with SDR#. I'm trying to get IQ streaming working as quickly as I can. I just want to stream IQ to the laptop that the HF

Hi Guys, new to airspy, new to this group, but have a load of analogue scanners - so not new to scanning. I can get the Airspy 2 and SDR# to work together no problem and it seems quite sensitive. But,

A quick follow up to the original video. Showing how effective a single part is in reducing noise from the battery charger. If they had just included it and the rest of the parts needed for effective

OK. I found that the Audio FFT plugin seems to have been "replaced" by the ZoomFFT plugin. I guess I really don't need the EQ plugin, and while the Scopeview plugin would be nice, this is starting t

If you like listening to HF, sooner or later you are run into a battery charger that generates serious RFI due to poor design. See how I attacked this with common available parts. The Airspy Discovery

Hi, recently I acquired a MiniWhip antenna in ebay https://www.ebay.es/itm/MiniWhip-Active-Antenna-Assembled-in-Box-HF-LF-VLF-mini-whip-sdr-RX-portable/123675615851?_trkparms=aid%3D111001%26algo%3DREC

Hi, I have a clean signal with SDR# and the Airspy HF+, but the time resolution isn't good enough for my use. In the screenshot attached, I'm counting the length of each pulse (e.g the width of each l