Topics

#spyserver not run after udpate SDR Sharp #spyserver


andrea ottaviani
 

hello.
after update to 1659 my HF+ don't work
my ipconfig<.
 Indirizzo IPv6 locale rispetto al collegamento . : fe80::118f:a9de:b685:b8c5%8
   Indirizzo IPv4. . . . . . . . . . . . : 192.168.1.252
   Subnet mask . . . . . . . . . . . . . : 255.255.255.0
   Gateway predefinito . . . . . . . . . : 192.168.1.1

my spyserver file config:

# SPY Server Configuration File AirspyHF+
# TCP Listener
#
bind_host = 192.168.1.252
bind_port = 5555
# User sessions
#
maximum_clients = 2
# Maximum session duration
# In minutes. 0 for no limit
#
maximum_session_duration = 30
# Allow clients to control the device
#
allow_control = 2
# Force 8bit mode
# 8bit mode has proven sufficiently good for most streaming use cases
#
#force_8bit = 1
# Maximum Bandwidth
# Limits the maximum IQ bandwidth the clients can set
# Recommended value for WFM is 200000
# Recommended value for narrow band modes is 15000
#
maximum_bandwidth = 15000
# FFT Frames Per Second
#
fft_fps = 15
# FFT Bins
# Bins = 2^fft_bin_bits
#
fft_bin_bits = 16
# Device Type
# Possible Values:
#   AirspyHF+
#   AirspyOne (R0, R2, Mini)
#   RTL-SDR
device_type = AirspyHF+

# Device Serial Number as 64bit Hex
# A value of 0 will acquire the first available device
#
device_serial = 0
# Device Sample Rate
# Possible Values:
#   Airspy R0, R2 : 10000000 or 2500000
#   Airspy Mini   :  6000000 or 3000000
    Airspy HF+    :   768000
#   RTL-SDR       :   500000 to 3200000
# Comment to use the device's default
#
device_sample_rate = 2500000
# Initial Center Frequency
#
initial_frequency = 710000000
# Minimum Tunable Frequency
# Comment if using the device default
#
#minimum_frequency = 0
# Maximum Tunable Frequency
# Comment if using the device default
#
#maximum_frequency = 35000000
# Frequency Correction in PPB
#
frequency_correction_ppb = 0
# Initial Gain
#
initial_gain = 7
# Converter Offset
# Set to -120000000 to enable the SpyVerter offset
#converter_offset = -120000000
# Bias-Tee
# For AirspyOne only - Useful for LNA's and SpyVerter
enable_bias_tee = 0
# Buffer Size (in milliseconds)
#
buffer_size_ms = 80
# Buffer Count
#
buffer_count = 40

my web adress:
sdr://ik0mmi.ddns.net

i receive, device was disconnected

thank you for help me
thank you

best 73 de IK0MMI
abdrea



andrea ottaviani
 

SOLVED!

missing in magic line spyserver info  pluginn.xml

sorry

best 73
IK0MMI