Why not using CSVUserList ? Amazing tool. https://www.df8ry.de/htmlen/home/%F0%9F%8F%A1welcome.htm

#sdrsharp

Hi Bob, Yes, the spectro area can display the stations you have in your memory banks. Download "frequency manager" plugin by Vasili (http://rtl-sdr.ru/) Note : there are issues if you use a dark theme

#sdrsharp

Then why does my unit always read +1Hz when comparing - in real time - the same MW carriers - with people who run properly calibrated SDR (Perseus, G31, G33, etc) using a signal generator ?

Hi Ian, My HF+ Discovery also reads +1.1 Hz on the MW band (though perfectly calibrated on HF against various Time Stations). Another MW Offset DX chaser ;-) Patrick

Looking forward to playing with it when it's available :-)) Compact antennas is what I need. Have a nice week-end Pat

Hi there, About 2 months ago, I sent a mail to Vasili regarding his "Frequency Manager" plugin (I love it because it also displays stations names in the spectrum area). When using a dark theme, we now

Hi there, Is it possible, in the spectrum analyzer area, to modify the default color (grey) of the filter BW ? It's the same as the frequency markers and I sometimes get confused, especially on crowde

Merci ! A mon tour de souhaiter la prospérité à Airspy et à tous ceux qui participent de près ou de loin à son développement. Mes voeux également à tous les participants de cette liste.

Many thanks for the updated Extio dll Andrea. Best regards, Patrick

Thanks a lot Edward for this new tool. I'm just back home, thus I haven't tried it yet. Kind regards, Patrick

Everett, Thanks for the chart. Are the material 75 clamp-on ferrite actually totally useless at LF ? I was hoping they could have a minimal impact. ref https://www.digikey.com/product-detail/en/fair-r

Hi Everett, Unfortunately, I have no TDK N30 on hand. Only a FT240-31 ring and a couple of material 75 ferrite clamp on.

Hi there, << You will wind each toroid with 35 turns and they are connected in series, not stacked >> With 35 turns, what is the "frequency coverage" ? How many turns would be required for this setup

Congrats on this new release Eddie. Very useful and conveniant features Best regards, Patrick

All I actually need is accurate readings on the MW band, so it should be fine. << your calculation is only valid when center frequency is >= 300 kHz >> I set the center frequency to 500 kHz and the re

The center frequency is saved with a 1 Hz resolution. Coincidence! Hi ! I just ran LIVE listening this time, using again RWM Time Station as calibration source on HF and the BBC on LF (confirmed with

So that's most likely the explanation. I will have to think about systematically checking a reliable MW frequency every time I take a reading on a recording. Thanks for the prompt reply.

Hi ! My Airspy HF+ calibration is fine : less than 5 Hz off at 10 MHz after running for more than 1 hour. I use RWM or CHU Time Stations as calibration sources. But it reads about +1 Hz on reliable MW

Hi Leif, That's interesting. I thought the Discovery was superior to the Dual Port in this respect.

#bestpractice #experiment

Hi Folks, Thanks for the replies and tips, unfortunately, I'm not very comfortable with file types, containers, unsigned wav files and this kind of stuff ! All I know is that the format of the basic "