All my units are currently busy, but could this be the AUX VFO plugin line? Joe M.

#sdrsharp

If the unit is set to USB, it is locked to USB regardless of inadvertent clicks or bandplan settings. Joe M.

Ed, If you do this, can I make a few requests? 1 - Span Lock (as was requested below) 2 - Frequency Lock (like the plugin - effectively replacing it) 3 - Mode Lock 4 - Bandwidth Lock 5 - Volume Lock A

I've thought about that exact same thing. It would be an interesting plugin. The one I'm waiting for more is a deviation plugin. There may be programs that use discriminator audio to fingerprint. I'm

#fingerprinting

More accurately, up to 30 MHz is -73 dBm and above 30 MHz is -93 dBm. Then 6 dB more for each S-unit below S-9. Joe M.

Correction: Are you missing two zeroes? maximum_frequency = 1750000000 Joe M.

#sdrsharp #spyserver

"maximum_frequency = 17500000"????? That's less than your maximum. Are you missing a zero? Joe M.

#sdrsharp #spyserver

Thanks for letting me know that the few I've had in operation for 30+ years (one on a commercial tower) are not going to last. While I would not use them in duplex operation, they have been working fi

OK, so between 53.5 GB and 1.7 TB. Still way more than a 10 GB account will allow even at the minimums. Looks like it would run not quite a week at the most. And I imagine the R2 would be even more ou

Looking for a range, then. HF+ Discovery at minimum BW to R2 at maximum and no decimation The figures I'm coming up with are on the order of a little over 300 GB/month. This precludes a 10 GB/month wi

What is the typical monthly data usage figure for a SpyServer running 24/7? Thanks, Joe M.

Maybe a screenshot would help. As was mentioned, if the ESN is displayed, the unit is talking to the PC. It's not dead. Joe M.

Something that got cut off of the reply two ago is to make sure the ORDER (RADIO panel) is set as low as you can get it. But keys in the config file are set using NOTEPAD. Joe M.

Edit the file using NOTEPAD. Put the cursor before the 300, hit the DEL button twice then the 6 button once then click FILE then SAVE. (Or highlight the 30 and hit the 6 button, then FILE / SAVE) Joe

To decode CTCSS you want the low filter cutoff to be below 60. On the Joe M.

That might be VA cable doing that. I use VB Cable and have never seen that issue. Joe M.

That's the one I use with the latest FL release. But to be honest if someone were to make an AUX OUTPUT plugin it would make it obsolete. If the plugin could use different VFOs for different outputs t

-6 dB? I see identical performance with about a 4 dB gain difference (higher on the Discovery). As such, all absolute values are about 4 dB higher across the board. SNR looks to be within 1 dB. The re

Second that one. It's the best I've found. You can also purchase upgrades (cheap) for multiple virtual cables. Joe M.

It sounds like Windows is updating the driver for you so it won't work. Joe M.