|
where to get spyserver support
Larry, SDR Console only takes IQ from SPY server, so watch the bandwidth. Don’t have any Wi-Fi in the chain if you can possibly avoid it. Crunchy audio could be due to bandwidth issues. Simon Brown, G
Larry, SDR Console only takes IQ from SPY server, so watch the bandwidth. Don’t have any Wi-Fi in the chain if you can possibly avoid it. Crunchy audio could be due to bandwidth issues. Simon Brown, G
|
By
Simon Brown
· #43152
·
|
|
where to get spyserver support
Hi, SPY Server used to work with SDR Console – if there’s a problem I can check for any changes. Simon Brown, G4ELI https://www.sdr-radio.com
Hi, SPY Server used to work with SDR Console – if there’s a problem I can check for any changes. Simon Brown, G4ELI https://www.sdr-radio.com
|
By
Simon Brown
· #43148
·
|
|
frequencies.xml format
#software
#plugins
#sdrsharp
FWIW, If you’re working in C/C++ https://pugixml.org/ is an excellent XML library. Simon Brown, G4ELI https://www.sdr-radio.com
FWIW, If you’re working in C/C++ https://pugixml.org/ is an excellent XML library. Simon Brown, G4ELI https://www.sdr-radio.com
|
By
Simon Brown
· #43047
·
|
|
RDS Plug Ins for SDRSharp
#airspyhfplus
Yes, The differences are minor. Simon Brown, G4ELI https://www.sdr-radio.com
Yes, The differences are minor. Simon Brown, G4ELI https://www.sdr-radio.com
|
By
Simon Brown
· #43044
·
|
|
My "Go To" SDRs
There’s nothing wrong with Linux, it’s just a minority operating system. I actually run Ubuntu myself for a few projects such as a DX Cluster. I doubt anyone, anywhere has as many different SDRs as my
There’s nothing wrong with Linux, it’s just a minority operating system. I actually run Ubuntu myself for a few projects such as a DX Cluster. I doubt anyone, anywhere has as many different SDRs as my
|
By
Simon Brown
· #43022
·
|
|
Installation on Windows 7 64-bit
Mike, There’s no reason why SDR Console does not work with a Airspy HF+ on a W7 system, 32-bit or 64-bit, in fact I test with a W7 32-bit myself. Let Windows apply any outstanding updates – there may
Mike, There’s no reason why SDR Console does not work with a Airspy HF+ on a W7 system, 32-bit or 64-bit, in fact I test with a W7 32-bit myself. Let Windows apply any outstanding updates – there may
|
By
Simon Brown
· #42732
·
|
|
AirSpy R2 Heat build-up
Frank, Just FWIW I keep my Pluto + TX preamp/amp cool with this excellent USB fan. Draws only 1 or 2 watts, on low speed it’s quiet. In general it doesn’t get too hot in Cornwall, nevertheless I prefe
Frank, Just FWIW I keep my Pluto + TX preamp/amp cool with this excellent USB fan. Draws only 1 or 2 watts, on low speed it’s quiet. In general it doesn’t get too hot in Cornwall, nevertheless I prefe
|
By
Simon Brown
· #42704
·
|
|
Help with IQ data files needed - RF64 format
Hi, Just give a RF64 file that doesn’t work to the plugin developer. You (he) should skip chunks he’s not interested in, then it’ll be fine. Simon Brown, G4ELI https://www.sdr-radio.com
Hi, Just give a RF64 file that doesn’t work to the plugin developer. You (he) should skip chunks he’s not interested in, then it’ll be fine. Simon Brown, G4ELI https://www.sdr-radio.com
|
By
Simon Brown
· #42624
·
|
|
Help with IQ data files needed - RF64 format
Hi, I think the player is a plugin, not Youssef’s original. Simon Brown, G4ELI https://www.sdr-radio.com
Hi, I think the player is a plugin, not Youssef’s original. Simon Brown, G4ELI https://www.sdr-radio.com
|
By
Simon Brown
· #42606
·
|
|
Help with IQ data files needed - RF64 format
OK, Looks like the RF64 player will not play files with unexpected chunks – ideally it would just skip over them. I have a ‘xml ‘ chunk with my own info about the file, maybe this is what caused the p
OK, Looks like the RF64 player will not play files with unexpected chunks – ideally it would just skip over them. I have a ‘xml ‘ chunk with my own info about the file, maybe this is what caused the p
|
By
Simon Brown
· #42595
·
|
|
EMC Pre-compliance testing
Very good point. Simon Brown, G4ELI https://www.sdr-radio.com From: airspy@groups.io <airspy@groups.io> On Behalf Of prog Don't use receivers optimized for SNR and Dynamic Range to do any measurements
Very good point. Simon Brown, G4ELI https://www.sdr-radio.com From: airspy@groups.io <airspy@groups.io> On Behalf Of prog Don't use receivers optimized for SNR and Dynamic Range to do any measurements
|
By
Simon Brown
· #42587
·
|
|
EMC Pre-compliance testing
Just FWIW (how to suck eggs), To convert from dBm to dBμV just add 107. Simon Brown, G4ELI https://www.sdr-radio.com
Just FWIW (how to suck eggs), To convert from dBm to dBμV just add 107. Simon Brown, G4ELI https://www.sdr-radio.com
|
By
Simon Brown
· #42584
·
|
|
Help with IQ data files needed - RF64 format
Dave, Thanks – I can play it back OK. I’ll look at the structure tomorrow with luck. Simon Brown, G4ELI https://www.sdr-radio.com
Dave, Thanks – I can play it back OK. I’ll look at the structure tomorrow with luck. Simon Brown, G4ELI https://www.sdr-radio.com
|
By
Simon Brown
· #42579
·
|
|
Help with IQ data files needed - RF64 format
Dave, Please make a sort (5 minute) RF64 recording in SDR#, upload it somewhere and send me a link. Maybe there’s something special with the format used in SDR#. Simon Brown, G4ELI https://www.sdr-rad
Dave, Please make a sort (5 minute) RF64 recording in SDR#, upload it somewhere and send me a link. Maybe there’s something special with the format used in SDR#. Simon Brown, G4ELI https://www.sdr-rad
|
By
Simon Brown
· #42577
·
|
|
Help with IQ data files needed - RF64 format
Dave, SDR# doesn’t use the SDR Console XML chunk in WAV, rather depends on the filename. You’ll have to rename the new file in accordance with the SDR# format. Were SDR# to support a meta chunk then I
Dave, SDR# doesn’t use the SDR Console XML chunk in WAV, rather depends on the filename. You’ll have to rename the new file in accordance with the SDR# format. Were SDR# to support a meta chunk then I
|
By
Simon Brown
· #42575
·
|
|
Help with IQ data files needed - RF64 format
Dave, Use the Data File Editor, part of SDR Console. This can save as smaller files or as RF64. You can extract only the part of the recording of interest. https://www.sdr-radio.com/data-file-editor S
Dave, Use the Data File Editor, part of SDR Console. This can save as smaller files or as RF64. You can extract only the part of the recording of interest. https://www.sdr-radio.com/data-file-editor S
|
By
Simon Brown
· #42565
·
|
|
R2 stopped working with Console 3
An advantage of the transverter – it transmits! For EME a masthead preamp with NF < 0.5dB is common. Of course, wideband receivers are a different proposition. Simon Brown, G4ELI https://www.sdr-radio
An advantage of the transverter – it transmits! For EME a masthead preamp with NF < 0.5dB is common. Of course, wideband receivers are a different proposition. Simon Brown, G4ELI https://www.sdr-radio
|
By
Simon Brown
· #42126
·
|
|
AIRSPY I & Q outputs.
Jeremy, I beg to differ. I have an IC-r8600, the ICOM r8600 IQ is good, there are several software packages which support it via a USB cable, the result is as good as the radio itself. Connecting a se
Jeremy, I beg to differ. I have an IC-r8600, the ICOM r8600 IQ is good, there are several software packages which support it via a USB cable, the result is as good as the radio itself. Connecting a se
|
By
Simon Brown
· #42122
·
|
|
R2 stopped working with Console 3
But, I’m using the Q5 Signal transverter, 144 MHz ó 28 MHz. The Q5 NF is < 1dB (published figure), this is the key. http://q5signal.com/index.php?route=product/product&path=60&product_id=52 Simon Brow
But, I’m using the Q5 Signal transverter, 144 MHz ó 28 MHz. The Q5 NF is < 1dB (published figure), this is the key. http://q5signal.com/index.php?route=product/product&path=60&product_id=52 Simon Brow
|
By
Simon Brown
· #42121
·
|
|
R2 stopped working with Console 3
Discovery should be better than the 9700. I ‘think’ the noise figure for the discovery is 4 to 5 dB, so a masthead preamp will help. FWIW I use a Q5 Signal transverter + FDM DUO on 2m, NF is significa
Discovery should be better than the 9700. I ‘think’ the noise figure for the discovery is 4 to 5 dB, so a masthead preamp will help. FWIW I use a Q5 Signal transverter + FDM DUO on 2m, NF is significa
|
By
Simon Brown
· #42115
·
|