I just got the latest version of spyserver running on a fresh Raspian install. All devices are in my LAN. It seems that analog voice works OK, but my primary interest is decoding digital V/UHF traffic

#spyserver #raspberrypi #sdrsharp

If you can describe the problem in a more technical way, maybe someone will understand what's going on and probably provide some help.

#spyserver #raspberrypi #sdrsharp

Hi everyone ! I running SPY Server v2.0.1629 on Raspberry Pi 3. I want to run automatic Spyserver after reboot use method " crontab -e" with "nano". On Terminal . "crontab -e" , and then add the botto

#airspyhfplus #spyserver

In your /etc/rc.local file - find the line near the bottom that reads "fi". Immediately ABOVE that line, add this line: cd /home/pi/spyserver/ && ./spyserver Remove what you have in crontab. Save and

#airspyhfplus #spyserver

You are probably too young, but "motorboating" is a classic term in electronic engineering. It refers to a sound that reminds a small boat with a one cylinder engine. Usually it was used to describe l

#spyserver #raspberrypi #sdrsharp

This still doesn't look like an engineer's description of the problem. Or maybe I'm expecting too much.

#spyserver #raspberrypi #sdrsharp

I'm no engineer - but perhaps a more clear description is that the audio received in SDR# from the spyserver is heavily distorted, with what sounded like a constant-pitch tone mixed in. I tweaked a fe

#spyserver #raspberrypi #sdrsharp

Thanks Mike, I used "sleep" next to "@reboot", and it run if fine !

#airspyhfplus #spyserver

Hello, did any have or know a advice/web page or PDF where is a bit more helpful instruction (for a beginner) how to setup a Raspi for an SDR server? I have check here at group, also the AirSpy web (i

#raspberrypi #spyserver

https://www.rtl-sdr.com/rtl-sdr-tutorial-setting-up-and-using-the-spyserver-remote-streaming-server-with-an-rtl-sdr/

#raspberrypi #spyserver

https://github.com/airspy/airspyhf/blob/master/README.md

#raspberrypi #spyserver

hello. after update to 1659 my HF+ don't work my ipconfig<. Indirizzo IPv6 locale rispetto al collegamento . : fe80::118f:a9de:b685:b8c5%8 Indirizzo IPv4. . . . . . . . . . . . : 192.168.1.252 Subnet

#spyserver

SOLVED! missing in magic line spyserver info pluginn.xml sorry best 73 IK0MMI

#spyserver

I just pulled my Airspy/Spyverter combo out of storage after being away from the hobby for a while. I'm curious to find out what version I have. The photos on the web don't seem to show any difference

#hardware #spyserver

The only way I know is to open the box (unscrew the 4 screws on the USB side of the box) and look inside if you see a golden border around the PCB it is an R2. You can find images of the Printed Circu

#hardware #spyserver

Thank you Martin. I have now verified I have a R2.

#hardware #spyserver

######################################################################## ###### PREREQUISITE ############### ######################################################################## Download unzip and

#spyserver

Grazie! 73 de IK0MMI andrea

#spyserver

Hi airspy, Some strange behaviour with a higher noise floor while the antenna is not connected: - if i connect the airspy hf+ directly to my pc, i see about -135dbm noise floor (using sdrconsole) - if

#spyserver #raspberrypi

I think sdrconsole to low. The in no your rasp. Closer to reality.

#spyserver #raspberrypi