Maybe. I just followed the path there https://github.com/airspy/airspyhf .

#spyserver

Gave it up now. Pulled out my old Raspi2, there it works without any problems. Spyserver generates between 40% and 60% load @1000MHz, even at 32bit float format, when using full IQ. With highest decim

#spyserver

Hi everyone, my HF+ landed and I hooked it up for online listening. Antenna: Self-made AAA-1C active mag loop receiving antenna positioned 13m above ground on a balcony facing west Machine: Dedicated

#spyserver #airspyhfplus

Works fine in Paris. Maybe you should set the center frequency in an interesting band and fix it.

#spyserver #airspyhfplus

This is the QRM I mean, which is leading into 80m band

#spyserver #airspyhfplus

I also have a spyserver on line now. The radio is a HF+ Antenna is a 20+ meter loop QTH is just north of Stockholm / Sweden You can reach it on: spyserver.thulesius:5555 Have fun SM0JZT - Tilman

#spyserver

Thank you very much Tilman. A few questions: - Is this radio permanent? - Will you fix the center frequency at some HAM band (multi-user) or free tuning (single user) ?

#spyserver

Please explain the differences multi-user and single user. Thanks. Serge RW3PS 2018-01-16 14:49 GMT+03:00 prog <info@...>:

#spyserver

Multi user: Multiple users can connect, and they share the same view of the spectrum around a fixed center frequency. Single user: Only one user can connect, but he can tune the device anywhere within

#spyserver

Hello Tilman, sorry but no connect ! 73 Roberto iw4ens

#spyserver

Another question, how does it work: # Allow clients to control the device # allow_control = 1 What functionality is available to control users? Full IQ, what else? If there are 10 clients, all will be

#spyserver

Control includes the device's center frequency and gain stages if there are gain stages. When there's more than 1 client connected, the control is disabled for all. Yes, you can specify the min/max fr

#spyserver

Thanks, I play and experiment :) It is possible to listen to sdr://212.12.25.112:5555 1-8 MHz antenna Inverter V 80/40m 200 кm South of Moscow, the number of clients is limited and I can briefly disab

#spyserver

Hi there Yes this radio is permanent. I have a dedicated server running it. I might have multiple HF+ running of it in the future. This to open up multiple segments. I might also swap for a better ant

#spyserver

Hi, I try to run the latest version of SpyServer on Raspberry Pi 3 with Raspbian, but get the following error: Raspi runs quite fresh raspbian (Linux raspberrypi 4.9.41-v7+ #1023 SMP Tue Aug 8 16:00:1

#spyserver

Install the user mode driver for Airspy One? https://github.com/airspy/airspyone_host#how-to-build-the-host-software-on-linux

#spyserver

Hi, Apparently airspy package from the raspbian repository is not enough / too old (??). Thank you for the solution! Regards, O.

#spyserver

Hello! I use RTL-SDR and Spyserver on Linux. To this server I connect and my friends program SDRSharp. How can I see the number of users connected to the server at the current time? Is it possible to

#sdrsharp #spyserver #RTL

Running into the same problem, in my case the device is busy, so can I build the spyserver from scratch on a raspberry pi 3?

#spyserver

Same problem with unable to load user mode driver for Airspy HF+ on a fresh Raspberry Pi 2 with Raspbian Stretch. Completed the Github instructions successfully, still no joy. Dave, WB5NHL

#spyserver