Hello what rig set up did you use? also I noticed a really cool stereo fading on one of the ids how did you get that done? thanks Hank On 2/10/2022 10:55 AM, Peter

My R2 gets very hot after just an hour or so of operating. I recently attached two small heatsinks to the case to try and help it dissapate some of the heat. I think the performance is suffering

Hi, do you plan to develop a TDOA plugin for SdrSahrp? It is the tool that would make the software even more attractive.

Alternatively, you could avoid modifying your radio and instead make use of the 'RX Loop' ports on the back of the IC-7600. You can feed the 'output' port of the RX Loop into a 2-way splitter, then

Also an Arch user and did have a problem with my Discovery and libusb 1.0.25, it was fixed in a airspyhf patch https://github.com/libusb/libusb/issues/1059 airspyone_host drivers were patched for this

Hi All, I am running Arch linux and the crash issue seems to be related to a libusb update that was posted Feb 3 2022. Apparently part of the libusb interface was 'refactored' requiring any

Hi Alex, I also have the same issue It seems to be an issue with Monterey and build 1.0.25 I actually gave up with it due to the crash at start but will try again and catch the crash dump in the next

Joanne, Probably why I wrote "standard" in quotes! It would be helpful if the Audio Recorder could resample to the older rates too. David GM8ARV -- SatSignal Software - Quality software for

Out of addled curiosity why do you think CDROM sample rates are the industry standard? The hardware in modern PCs is based on 48 kHz and harmonics. Of course, getting to 48 kHz audio

With the Community Edition, there is an audio recorder plug in with a variety of sample rates all based on 8 kHz or multiples. It would be helpful if these could be expanded in the future to include

Hey SDR# Studio enthusiasts! I published a new version of the SDR# Studio AudioEqualizer plugin for .NET6, Version 1.18, featuring a DSP audio graphic equalizer. Compatible with SDR# Studio 32 bit

Please disregard my idiocy - I misread the original post. Blame it on cataract surgery.

As the IF out from the IC-7600 is outside the tuning range of the HF +, you'll need a mixer stage in order to accomplish what you're trying to do. Either that, or use a different SDR, such as a Mini

Have you fitted an IF tap AKA panoramic adaptor tap (PAT) to access the 1st IF at 64.455 MHz. There is some useful information here: https://www.ab4oj.com/icom/ic7600/ic7600_rtl_sdr.pdf

Hi, Although there are indeed issues with libusb 1.0.25, if you use the latest nightly .app bundle, it should still be running 1.0.24 (bundled along with the app so it shouldn't use the system

https://sdrpp.org/nightly/ You will need a free GitHub user account, but did you get the "nightly" build (currently #605) of SDR++ from here? Also, did you try running the R2 at 2.5 MSPS instead of 10

Maybe this has something to do with the latest libusb. A patch was pushed the user-mode drivers to keep it happy. Libusb is the weakest spot inside every computer.

Huub & Alexandre & All , Hello To recap to All : I have been unable to get SDR++ MacOS to play. Environment : Airspy R2, SDR++ v1.0.5 MacOS/Intel, MacbookPro 10.15.7

Here is an extended version of the strongest station -1590 WCGO Evanston IL 13730km, booming in Botswana. https://youtu.be/dxJo8LTC9i8 Peter

Thank you Greg. Best Wishes Paul