I think the same as Adam: Omnirig with the option to follow VFA A or B (Main or SUB) could be great. Ruben EA5BZ

From: Dave C aka Dave3825us via Groups.Io After dongle was on for 2 hours, this is what she puts out. ============================ Looks good to me, Dave. I recall there being an average at the

No, it's just my bet. STA709 in I2S LVDS bus mode: i can see the three differential pairs ending at LVDS to SE converters.

Hello Tag, 99% of the users will be happy to have the option when double click on the spectrum/waterfall signal to tune the main radio to that frequency. One click will do the same as up to now, tune

Im not trying to get a 30db noise improvement. I'm mostly trying to get rid of the USB clock harmonics around 400 and 900 that end up mixing all over the place. I didn't think the r2 was a mediocre

Working OK here in York England. John. On 15/11/2017 15:20, Martin via Groups.Io wrote:

Robert, It’s all shielded, nothing to see here, please move along. Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

I bet you will not find anything in particular under the RF shield to eliminate USB noise. It must be acomplished with a good overall design, starting from the component selection, power scheme,

Cat or Omnirig Dear Tag, With regard to the above, as a minimum one would like to be able, directly in SDR#, to link up with something like Omnirig, to effortlessly import frequencies and

After dongle was on for 2 hours, this is what she puts out.

I have been waiting a long time for the HF+ to come out, so I could ask any willing owner to pop it open and take some detailed close up pictures of the PCB with the RF shield popped off the RF front

On Wed, Nov 15, 2017 at 03:18 pm, John wrote: On Wed, Nov 15, 2017 at 12:45 pm, Martin wrote: Hi, Would it be possible to add a short text field in the Spyserver config that would be displayed under

On Wed, Nov 15, 2017 at 12:45 pm, Martin wrote: Hi, Would it be possible to add a short text field in the Spyserver config that would be displayed under the Device serial number and Server version in

On Wed, Nov 15, 2017 at 02:13 pm, Carlos Cabezas Prudencio wrote: Unfortunatelly, a full datasheet is not openly available, but after some PCB photos analysis, my guess is that a STA709 tuner is

Unfortunatelly, a full datasheet is not openly available, but after some PCB photos analysis, my guess is that a STA709 tuner is soldered under the hood. This means that it's a multiband Zero-IF

Holy shit! THE Tag Loomis!!! Haven't heard hide nor hair of you since [BBReg]. On 11/15/2017 12:38 PM, Tag Loomis wrote:

Hi, Thinking about this further. Could some connection stats / diagnostics such as packet errors also be displayed so that it's easier for folks to optimise the throughput. Regards, Martin - G8JNJ

Hi, Would it be possible to add a short text field in the Spyserver config that would be displayed under the Device serial number and Server version in Airspy. This would allow admins to send a short

On Wed, Nov 15, 2017 at 12:15 pm, Otto Schellin wrote: >>> Just one issue of note offhand with version 1626 - in the Smoothing section of my FFT Display section the sliders are all disabled and grayed

>>> Just one issue of note offhand with version 1626 - in the Smoothing section of my FFT Display section the sliders are all disabled and grayed out. Just a follow-up to the above regarding the