Jeff, Can you also try my KiWi web sdr which is running over the same network. http://southwest.ddns.net:8073 See if the web sdr also has problems if you run that and the spyserver connection

I tested it some time ago, but it is bery "basic". Omnirig support could be wonderful !

OK, thanks for the report. It could be that my other Web SDR's are using up my limited uplink bandwidth. I'll take another look at it tomorrow. Regards, Martin - G8JNJ

Absolutely and please don’t call me Shirley.

Shirley there should be 0% duty on the HF+? Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com

Since I am running a rtl-sdr dongle with only 2M width on my Tinker Board, I decided to automate changing the bands that I listen to throughout the day. Basically , by

Martin, Lots of stutter in New Jersey. Jeff

Hi Jon, Try my V3 running in direct sampling mode with no filters. sdr://g8jnj.zapto.org:5557 Regards, Martin - G8JNJ

Hi Jon, The Wellbrook tends to have a high output on the lower frequencies. You could try adding something like a 100pF capacitor in series with the RF feed to the RTL-SDR as a very crude amplitude

There is a CAT plugin for Sdr#, its called sdrsharp-catcontroller Its been a while, the but when I did try it previously, it worked very well. Presents sdrsharp as a TS50 Find it on Google and/or

My experience with previous Airspy purchases from Itead has taught me that it's very well worth taking the gamble regarding any import duty and VAT etc At the moment I'm winning 2-0 73s Tracey G5VU

Wow! Still won't be long and then the Wellbrook will be put to good use.... 1623 installed and running, just a few tests now. Thanks for everything Youssef.

Here's the funny part: https://twitter.com/lambdaprog/status/930489661063036931

Hi John are your server up and running? as I tried again but no signal on my remote airspy software 73 Claudio

...And there was I thinking all was good on 1622! Downloading 1623 now... As for an attenuator, oops, not got one....Time for some more home brew building. Anyone got any good designs that I can knock

But if it goes wrong don't expect Moonraker to help you. Still there's always the R&D&manufacturing in China ;-( For the sake of a few quid I'd sooner sleep at night and not be a skinflint. Yo ho

Yes but when customs get the incoming parcel they will add 5% duty to the HF+ price and then 20% VAT to the total including the duty and shipping cost ..... So the actual price will be closer to $199

Tracey, Which includes tax. Around £33 VAT. Which does not, best of luck! 73 Alan G4ZFQ

Indeed. I rebuilt the server to disable the gain setting when in direct sampling mode. v2.0.1623.

It's called VAT.