Thank's a lot. What sample rate are you using? 10mhz ? or 2mhz?

Well said and understood, thank you! So, could you please suggest a cheap but good enough Windows tablet that can run SDR SHARP & AirSpy decently enough?

And, in addition to that, you need also some signals to test the software with, and in Europe you have none... -- 73 Alberto I2PHD Credo Ut Intelligam

Besides the US, HD-Radio is also used in Canada and Mexico. Not sure about anywhere else. -Ray WB6TPU

no, i using a orange pi lite, same processor as raspberry 3.. i see shuttering disappair tuning buffer. this mine config: # Buffer Size (in milliseconds) # buffer_size_ms = 20 # Buffer

Roberto: Are you using Raspberry. What buffer settings are your using? and samplerate?

Hello Alan, Yes, HD-Radio is a USA centric (or is that exclusive?) technology and yes, it's strange that there isn't much SDR software (free) developed in the USA either. There

Well, Apart from the pure legality there are many hours involved. Simon Brown, G4ELI www.sdr-radio.com

 Hi David could it be an NIH syndrome ......it is a "Local" mode and I think the s/w you mention is predominantly generated in Europe, and I guess we dont have it here. Needs a clever US coder to

Thanks for the link as that was an interesting read. That does bring up a question that I've been unable to find an answer to: Why don't any SDR applications ideally on Linux (Gqrx)

William, try the link at the bottom of email. Inviato da OldPhone

Tune buffer in spyserver.config 73 iw4ens Inviato da OldPhone

Why would you run an SDR in such a restricted OS? Get any cheap Windows tablet and run the fully fledged softwared on it. Not only it has more functionality, but you also have the processing power of

Good afternoon! Which is the most reliable Android app you run in order to utilize in best way AirSpy R2 in Android 4 or newer release? Thank you! Dennis.

Please remove me from this group. -- William E. Thompson (336) 653-4956

A lot of thank's. Doing some tests...in the future i will change to an Odroid.

For RPi3, 2.5 or 3 MSPS is about the right limit. If you use an Odroid XU4, you can fo with 10MSPS without problems. I think the default configuration should work for all.

Running fine now with raspberry pi 3. I must run at device_sample_rate = 2500000 Using 10mhz i have high cpu load on raspberry and audio cuts. What are recommended for spyserver using raspberry pi

https://fmradiodx.wordpress.com/2017/08/06/review-of-the-airspy-r2-sdr-radio/

A lot of thank's and excuse me becouse not reading quickstart guide. I didn't know about it. I had to dist-upgrade to testing version of raspbian becouse we have gcc 4.x on stable.