No. Connecting and reconnecting SDR# from the server has no effect. I do not think SDR# is causing the problem. The only thing that fixes the problem is to remove the dongle from the USB port and

Ah. As I understand it spyserver and SDR# support for RTl-SDR dongles is experimental and can't be relied on to work. -- Brian Gregory. bdgregory@... www.Brian-Gregory.me.uk

Updates will sometimes change the power settings, particularly for ethernet and USB. If the device's USB port gets turned off because of a power setting, it may "disappear". It's worth a check

Greetings: I have had years of satisfactory operation with the HF+ Receiver and SDR-Console software. I was excited when the HF+ Discovery came on board and decided to pre-order it. I just got around

Hi, Same here with spyserver on raspberry pi 3, raspbian buster and rtf-sdr v3. Restart spyserver dont solve the problem, I have a crontab to reboot every hour. Regards

You're saying disconnecting and reconnecting (from within SDR#) doesn't fix it? Which type of SDR dongle are you using? -- Brian Gregory. bdgregory@... www.Brian-Gregory.me.uk

I have been successfully running SpyServer on my Win10 64 bit computer with no problems for the past couple of months with ONE EXCEPTION. Sometimes (seemingly random) the when I connect to the spy

I tried routing WFM demod to KG-Tone, & its squelch works OK. The problem is the wide modulation BW of broadcast FM is detected by the noise squelch in KG-Tone, & sometimes it chops off a bit of the

Never has worked with WFM. It was not designed for NFM. {^_^}

Hi Prog, I am an active FM-dxer in 87.5 - 108MHZ and have been introducing myself SDR# on that band also. As a receiver I have Airspy HF+ DP and Discovery. Everything works like a clockwork. BUT! Why

Yes. I think this should be sufficient. No antenna will work as intended in these conditions. Better let it live outside. This should be still OK for the lower bands (< 10MHz). A preamp like the one I

thanks for the feedback to Johann and Aldo Moroni. I have now successfully decoded data. It never worked with the compressed format, I had to set "Use full IQ". The minimum bandwidth to use was

I can't address your first question, but the second and third are more to the point> 2. You certainly can't expect to receive much of anything with an antenna inside your "Faraday Cage!" Your

.... and now think you have to do the same with a pluto and have also to live with an unknown lnb offset another reason why i add a trimmable tcxo inside pluto ... much easier to tune as to mess

I'm happy to advise that after a two week journey the postman delivered my YouLoop today!! I have a couple of questions though and it has to do with placement of the antenna and the feedline. 1. Are

There is a good reason for this. There are two oscillators that need correction. And the correction process is a nasty dance when you do not know what has to be corrected for the error you are seeing.

>Doesn't https://www.rtl-sdr.com/buy-rtl-sdr-dvb-t-dongles/ ship to Austrailia? Yes, I have bought a couple of items from them, they are shipped direct from the maker in China. So I would imagine

OK. I've tried and found DCF77 at " various frequencies " probably because missing hardware. The IF spectrum is same with the same misalignment. If I apply a shift of 1Hz, the IF spectrum is shifted 1

Just use that source and set the center frequency manually. It's just a sound card source.

No, I don't have the necessary hw.