Pleasing to read your report on your success with the Volutz USB cables.
I was looking at the Volutz Facebook page & I note that Volutz have just released a new Apple Lighting Cable.
For noise immunity I like the metal shroud that links the foil shield of the cable & surrounds the connector & components
underneath. One also gets a better look at the dual cable shielding from the drawing on the Facebook page.
Are these SMD components part of the lightning spec or are they part of Volutz's attention to EMI/EMC or impedance
I see a similar shroud on their USB C cable from their Facebook page.
What's not clear to me is if Volutz use a metal shroud on their connectors for their USB 2.0 to micro USB cables or
any filtering SMD components (if that's what they are?) similar to their new Apple Lightning Cable.
The Volutz website is scant with close up pics & tech data.
A further improvement to their USB 2.0 to micro usb cables would be to have a foil shield between the data & power pairs.
I purchased a replacement USB cable (CableCreation/Xillie) from the Internet last week. It arrived on Monday. It is supposedly triple shielded, but I suspect these are 'just
words' from a Chinese supplier via Amazon. I compared the the noise performance between AIRSPYHF+ supplied USB cable with my own
added mix of ferrites attached, also a Samsung USB cable, the CableCreation USB & the CableCreation Lead with a mix of ferrites.
Test freqs were roughly every 1MHz between 2 & 30MHz. Conclusions: I didn't gain the results I expected from the CableCreation USB cable, results were
similar to the plain Samsung Cable. But what brought best results was having ferrites on either the existing AirSpyHF+ USB cable or the CableCreation USB cable (similar results).
That said, for my own electro smog environment results were typically only a 2dB improvement to noise floor for the USB cables with the ferrites attached.
But on the better end of the results scale 'on some' frequencies I noted a 6-10dB improvement (with ferrites).
I'm sure if I purchased a better screened USB cable (similar to the standard of my router CAT6 S/FTP patch cables) I should hopefully see better results.
Every dxer has a unique RFI environment with their own unique challenges, some requiring a huge investiture of time & effort (mine's only in the early stages).
Our new Samsung refrigerator is the latest to be added to the RFI hit list (I'll try to mute my grumble).