OFFICIAL YAESU FTDX10 - www.FTDX10.com YAESU-FTDX10@groups.io
Compact HF/50MHz 100W SDR TRANSCEIVER
FTdx10 technical manual
ZELLO: Yes we are visual impairment considerate: (2013) ZELLO Voice chat - www.zello.com/ftdx10
Why type instead use a Free VOICE walkie chat application to ask/talk your question here. IOS / Android.
[Amateur Radio Yaesu FTDX10]
password:: groupsio (changed recently)
*** I am testing this out ***
By joining, the applicant agrees to abide by the rules set by the group moderators and owners.
This is a moderated Group. Please keep posts civil and on topic. (Any discussion about Amateur Radio is welcome) Please provide an Amateur Ham Radio [ Callsign ] when joining as It is a requirement. The email address to join the group is authenticated matched / compared with your QRZ.COM email or Radio1D-net.
This Groupsio is open only to licensed radio amateurs who are interested in the ham bands.
Please state your callsign to join.
Your email must be linked to your callsign.
The most basic request for this group is to have your FirstName and Callsign displayed on your groupsio profile and use when joining an email that can be matched to your qrz page.
We Encourage you to consider a Ham License, there is a whole other world out there waiting for you.
The rules are simple. Treat others with respect at all times. Like you would want to be treated by your peers. No commercial sales or promotions are allowed. If you have a personal radio for sale it's OK to post an announcement, but take negotiations off-list please. Any software posted in the "Files" area of the group must be in the public domain without distribution restrictions.
NO selling of commercial products !
Spam, racism, name-calling, vulgarity, religious or political propaganda, personal insults and/or verbal abuse will not be tolerated in this group at any time. Any member posting such material will be placed on moderated status, and is subject to deletion and banning.
After membership approval, messages are normally unmoderated, meaning they do not need to pre-approved before they get posted. That does not mean they are not read by the moderator. Inappropriate, grossly off-topic or off-color posts will be deleted. Repeat offenders will first be placed on full moderation and then banned. Please, no discussions of religion, politics, etc. This is a radio group. Purely provocative comments are strongly discouraged. The goal here is to share information not to criticise others trying to get help or be helpful. Remember, everyone was a beginner at some point and no one knows everything.
All are welcome.
FTdx10 technical manual
Compact HF/ 50MHz 100W SDR Transceiver
Functionalities of the top line models in a smaller form factor transceiver. FTDX10 is going to utilise the Yaesu Hybrid SDR Configuration.
Hybrid SDR Configuration
Like the FTDX101 series, the new FTDX10 utilises the Yaesu Hybrid SDR configuration – Narrow Band SDR and Direct Sampling SDR. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope.
Narrow Band SDR
Narrow Band SDR with 3 types of Roofing Filters and Phenomenal Multi-signal receiving Characteristics.
Like the FTDX101 series, the Down Conversion type receiver configuration with the first IF at 9MHz has been adopted. It makes it possible to incorporate excellent narrow bandwidth crystal roofing filters that have the desired sharp “cliff edge” shape factor. Thanks to the Narrow Band SDR with the latest circuit configuration including 500Hz, 3kHz and 12kHz roofing filters and low noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141dB or more, and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109dB or more, in the 14MHz band at 2kHz separation.
High Resolution Direct Digital Synthesizer
250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords Quiet and Clear Reception.
The local circuit of the new FTDX10 uses 250MHz HRDDS method same as the FTDX101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145dB or less in 14MHz at 2kHz separation.
3-Dimensional Spectrum Stream
3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Colour TFT Display with Touch-Panel Functionality.
The 5-inch Full-Colour panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed, and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTDX101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available.
Front Panel Designed for Superior Operating Efficiency.
Front Panel Designed for Superior Operating Efficiency MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels.
Remote Operation with optional LAN unit (SCU-LAN10).
Remote operation of the new FTDX10 is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operation such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network.
When Used With Optional LAN Unit (SCU-LAN10)
CALL SIGN SEARCH USA + CANADA (created)
- 326 Members
- 202 Topics, Last Post:
- Started on
Group Email Addresses
- All members can post to the group.
- Posts to this group do not require approval from the moderators.
- Posts from new users require approval from the moderators.
- Messages are set to reply to group.
- Subscriptions to this group do not require approval from the moderators.
- Archive is visible to members only.
- Wiki is visible to members only.
- Posts must be tagged with at least one hashtag.
- Only moderators can create hashtags.
- Members can edit their messages.
- Topics are automatically closed after 60 days.