Date   

Re: Another ISS SSTV Project?

Clint Bradford
 


Re: Another ISS SSTV Project?

Jer W
 

Hi Clint,
I down loaded the Robut36, but then it asked me to allow Robut36 to
access photos, media, and files on my devise. Do I really want to do that?
Why would it ask for things of privacy?

Jerry


On Monday, December 16, 2019, 4:54:01 PM EST, Clint Bradford via Groups.Io <clintbradford@...> wrote:



Re: Another ISS SSTV Project?

Clint Bradford
 


Re: Another ISS SSTV Project?

Jer W
 

Clint,
Is there an APP for the Android phone to view the SSTV? Is the HT suppose to be connected to the smart phone and if so, how?

Jerry


On Monday, December 16, 2019, 2:51:43 PM EST, Clint Bradford via Groups.Io <clintbradford@...> wrote:


An HT and a smartphone gets the job done!

http://www.work-sat.com/SSTV.html


Re: Another ISS SSTV Project?

Clint Bradford
 

That is for SSTV reception. Very few opportunities that past couple of years for 2m FM voice contacts. Watch ARISS and ARRL for possible projects.


Re: Another ISS SSTV Project?

Clint Bradford
 

An HT and a smartphone gets the job done!

http://www.work-sat.com/SSTV.html


Re: Another ISS SSTV Project?

Randal Rutkowski
 

What is the min equip I need to receive SSTV from ISS?  I always listen on a pass but have never had a voice contact since I don’t know their schedule.
Thanks
Randy
KM6RBG


On Dec 16, 2019, at 11:10 AM, Clint Bradford via Groups.Io <clintbradford@...> wrote:

Possible ARISS SSTV operation before year's end

ARISS reports the possibility of a worldwide commemorative SSTV operation from the International Space Station on Friday, Dec. 27 or Saturday, Dec. 28 and following days. 

The SSTV downlink frequency is 145.800 MHz. ARISS will provide more information as it becomes available. Watch the amsat-bb and follow @ARISS_status on Twitter for updates.

An SSTV system is an integral part of one of the ARISS ham radio stations, NA1SS/ RS0ISS in the Service Module. It transmits and receives JPEG still images. This system utilizes the Kenwood D700 and D710 radios and the ARISS antennas mounted on the Service Module. 
The SSTV equipment also includes SpaceCam and MMSSTV software, a radio/computer interface module and data cables. A Kenwood VC-H1 is also used to provide near real-time automatically transmitted images once every 3 minutes, when active.

A Kenwood D710 radio located in the Service Module was deployed by the Russian Space Agency, Energia to provide extended support of imaging experiments using various SSTV formats. It employs SpaceCam and MMSSTV software to transmit stored images.

The current Expedition 61 crew aboard the ISS includes Dr. Andrew “Drew” Morgan, KI5AAA, an emergency physician in the U.S. Army; veteran pilot Cosmonaut Alexander Skvortsov, RK6ATR; Luca Parmitano, KF5KDP, an Italian Air Force officer, pilot, and engineer; pilot Cosmonaut Oleg Skripochka; biologist Dr. Jessica Meir; and electrical engineer Christina Koch.

-ARISS, AMSAT, ARRL


Another ISS SSTV Project?

Clint Bradford
 

Possible ARISS SSTV operation before year's end

ARISS reports the possibility of a worldwide commemorative SSTV operation from the International Space Station on Friday, Dec. 27 or Saturday, Dec. 28 and following days. 

The SSTV downlink frequency is 145.800 MHz. ARISS will provide more information as it becomes available. Watch the amsat-bb and follow @ARISS_status on Twitter for updates.

An SSTV system is an integral part of one of the ARISS ham radio stations, NA1SS/ RS0ISS in the Service Module. It transmits and receives JPEG still images. This system utilizes the Kenwood D700 and D710 radios and the ARISS antennas mounted on the Service Module. 
The SSTV equipment also includes SpaceCam and MMSSTV software, a radio/computer interface module and data cables. A Kenwood VC-H1 is also used to provide near real-time automatically transmitted images once every 3 minutes, when active.

A Kenwood D710 radio located in the Service Module was deployed by the Russian Space Agency, Energia to provide extended support of imaging experiments using various SSTV formats. It employs SpaceCam and MMSSTV software to transmit stored images.

The current Expedition 61 crew aboard the ISS includes Dr. Andrew “Drew” Morgan, KI5AAA, an emergency physician in the U.S. Army; veteran pilot Cosmonaut Alexander Skvortsov, RK6ATR; Luca Parmitano, KF5KDP, an Italian Air Force officer, pilot, and engineer; pilot Cosmonaut Oleg Skripochka; biologist Dr. Jessica Meir; and electrical engineer Christina Koch.

-ARISS, AMSAT, ARRL


Re: ISS SSTV This Week?

Randy Davenport
 

It is a Russia-centric project ...

Clint


>> ... Clint, Where will iss be during these times?


ISS SSTV This Week?

Clint Bradford
 

Surprising, especially with a cargo mission heading its way to the ISS this week. BUT ...

Russian cosmonauts are expected to activate Slow Scan Television (SSTV) image transmissions on 145.800 MHz FM from the International Space Station on Wednesday to Friday, December 4, 5 and 6.

This is the schedule for the planned activation of the MAI-75 SSTV activity from the ISS.

• Dec 4: On - 12:00 GMT, Off - 16:50 GMT
• Dec 5: On - 11:25 GMT, Off - 17:15 GMT
• Dec 6: On - 10:20 GMT, Off - 16:40 GMT

Transmissions will be sent on 145.800 MHz FM in the SSTV mode PD-120. Once received, images can be posted and viewed by the public at http://www.spaceflightsoftware.com/ARISS_SSTV/index.php

ISS SSTV uses a Kenwood TM D710E transceiver which is part of the amateur radio station located in the Russian ISS Service Module.

Please note that SSTV events are dependent on other activities, schedules and crew responsibilities on the ISS and subject to change at any time. You can check for updates regarding planned operation at:
ISS Ham https://twitter.com/RF2Space
ARISS Status https://twitter.com/ARISS_status
ARISS SSTV Blog https://ariss-sstv.blogspot.com/
AMSAT Bulletin Board http://www.amsat.org/mailman/listinfo/amsat-bb

Read the MagPi article Pictures from space via ham radio
https://www.raspberrypi.org/magpi/pictures-from-space-via-ham-radio/

ISS SSTV info and links https://amsat-uk.org/beginners/iss-sstv/


From Email ...

Clint Bradford
 

I have received several email messages and telephone calls during the Thanksgiving "break" - 
many hams trying out the satellites for their first times! Really exciting, indeed!

Many "first-timer" questions are addressed in the tutorial offered on the home page and
throughout our support Web site ...

http://www.work-sat.com

Questions like ...

>> ... How do I know when a satellite will be overhead?

Several programs and sites cited on the TRACKING page on the Web site!

>> ... The satellite isn't breaking squelch ...

From the tutorial: The one “absolute” for success is to open up your SQuelch. We
are talking about “weak signals” from hundreds of miles away - so don’t expect
the satellites to be strong enough to break squelch like your local repeater does.
Sure, it’s a little noisy - but that’s part of the process: That noise is an aid in
locating the satellites! When the frequency starts exhibiting quieting, that’s a sign
that you are capturing the satellites’ signals.

>> ... Can I do this with the stock antenna that came with my handheld radio?

Again, from the tutorial: Improve your HT’s stock antenna (most are rated at
NEGATIVE 6db - or worse!). The Smiley 270A is a good performer, and is
available in Male SMA, Female SMA, and Male BNC models. But for best success,
you need more GAIN, so using an Arrow Satellite Antenna or Elk Log Periodic is
much better. If you prefer to home-brew your antennas, go to the work-sat.com Web
site’s ANTENNAS page for construction article links: You can get in to the world of
high gain operations for as little as $15!

>> ... Is Doppler only for receiving?

The Doppler phenomenon isn't "dependent" on whether a frequency is 
transmitted or received. It is "frequency-dependent." It is on the 440mHz side 
of life where we should compensate for Doppler. It is the 440 side where there 
could be as much as +/- 10kHz deviation in an FM satellite's frequency. So whether
that is SO-50's downlink - or AO-91 or '92's uplinks - it is the 440 frequency for which
we need to compensate. The frequency chart at work-sat.com takes this in to consideration
for you. 

>> ... I saw someone using a longer whip ...

Yes - I know of many who are successfully working AO-91 and AO-92 with stock or improved 
antennas on their HTs. A little more finesse is required - but it is being accomplished!

From the tutorial: If using a whip antenna, don’t hold it upright. Held in a vertical position,
your transmitted signal is hitting land-based receivers. Most of our satellites are not land-
based (grin). You need to tilt your HT’s antenna about the same amount as the satellites'
ELEVATION. Get it perpendicular to the orbit’s path! You will quickly get the hang of it -
and hear the difference. Again, you will have much better results with a modest beam or
Yagi antenna ...

>> ... [full-duplex operations] ...

From every of the 100+ presentation I have made, and from the tutorial: Ideally, we
should be working the FM voice satellites in full-duplex mode, where we can
simultaneously listen to the downlink as we are transmitting. Although this method is
preferred, it is not mandatory: Carefully monitor the downlink, and wait for a break
in the conversations to key your mic and announce yourself ...

>> ... What is my grid square?

There are Smartphone apps that will tell you your grid square. If you are home, a lookup
of your own callsign on QRZ.com has it for you. And on work-sat.com on the SHACK AIDS 
page is a link to a grid square locator!

Happy holiday season to all!

Clint K6LCS


WIMO xpol antennas for satellite use

Rusty O'Shaughnessy
 

I recently purchased the 2 meter and 70 cm X-Quad antennas from WIMO.
They can run horizontal or vertical, or circular with a phasing cable.
With switching, I can select any one of the three polarities from my shack.
Circular will be used for the satellites.

I am having some issues with very poor SWR on the 70 cm version.
I haven't started testing the 2 meter version.
The specs don't list the resonant frequency nor the bandwidth.
I asked WIMO about this and they didn't have any information on those specifications.

I'm hoping to be able to use the UHF from 430 MHz to 440 MHz.

Does anyone have any experience tuning these antennas?
With what results?

Thanks
Rusty O, K7RMO


ISS SSTV December 14-15?

Clint Bradford
 

Several workable passes over Southern CA - IF there’s an SSTV event December 14-15 ... Watch for details!


Partial Success!

Marty Bluhm <w8aks55@...>
 

Good Morning.
Yesterday I finished doing the K0PIR camera mount mod. Need a lock washer.
But was able just now to hear some signals off the just completed AO91 pass over WV.
I couldn’t make out any calls but at least I know it works <grin>
The setup is as follows
Elk duoband mounted on a camera tripod sitting in front of my recliner in the living room.
Receiving on a RSP2 using console 3.0— ver.
I have the GT3-TP sitting here but it’s going to be a while until I get the receiving bit down pat.

Any suggestions, hints and yes criticism is welcome.
I have to do some double checking making sure I have everything right.

Having the spectrum scope on the rsp2 is so helpful. Watching the signals pop out of the noise is cool!

Thanks for letting me share my excitement with y’all.
73
Marty
W8AKS


Re: GT-3TP Satellite Usage

Randal Rutkowski
 

Marty
My family is from Hill Top, outside of Oak Hill!  Beautiful time of the year there!!
Good Luck!
Randy
KM6RBG
Atascadero CA


On Oct 15, 2019, at 5:23 PM, Marty Bluhm <w8aks55@...> wrote:

First off, thank you for the responses. They were greatly appreciated.
Following the book of baby steps, this is what I have configured.
Transmit Side: GT-3TP ( not configured)
Receive: RSP2
Antenna: Elk log periodic
Computer: Dell i5 currently running Win7
Software: have Sdr-console v3 and gpredict both up and running for evaluation. Also Sdr-uno and hdsdr are on board.

The Elk is mounted ln a pvc section approx 5ft. tied to pole for present. As it sits, coverage is from ssw to nne in the clear. It is blocked to the east by the house.

Present plans are first try to hear something, no joy so far. Then proceed to programming the radio.
I have a diamond duplexer that I can use when I figure out how to connect it.
Likewise, I have 2 mfj 1708 t/r switches, one the SDR version and one generic version. Another research project so I don’t blow up the rsp2 which is a fun and very good radio.

So that is where I’m at. No timeframe, just enjoying. It will be nice when I start hearing things.

Thanks again , any comments/suggestions and that includes criticism. After 64 years of hamming and 79 years of life, the skin is pretty thick although it doesn’t look it. hi hi

73 and y’all have a good one, hear.
Marty
W8AKS
Beckley (Almost Heaven) WV


Re: GT-3TP Satellite Usage

Marty Bluhm <w8aks55@...>
 

First off, thank you for the responses. They were greatly appreciated.
Following the book of baby steps, this is what I have configured.
Transmit Side: GT-3TP ( not configured)
Receive: RSP2
Antenna: Elk log periodic
Computer: Dell i5 currently running Win7
Software: have Sdr-console v3 and gpredict both up and running for evaluation. Also Sdr-uno and hdsdr are on board.

The Elk is mounted ln a pvc section approx 5ft. tied to pole for present. As it sits, coverage is from ssw to nne in the clear. It is blocked to the east by the house.

Present plans are first try to hear something, no joy so far. Then proceed to programming the radio.
I have a diamond duplexer that I can use when I figure out how to connect it.
Likewise, I have 2 mfj 1708 t/r switches, one the SDR version and one generic version. Another research project so I don’t blow up the rsp2 which is a fun and very good radio.

So that is where I’m at. No timeframe, just enjoying. It will be nice when I start hearing things.

Thanks again , any comments/suggestions and that includes criticism. After 64 years of hamming and 79 years of life, the skin is pretty thick although it doesn’t look it. hi hi

73 and y’all have a good one, hear.
Marty
W8AKS
Beckley (Almost Heaven) WV


Re: GT-3TP Satellite Usage

David Spoelstra
 

Chirp is your friend for programming all the Chinese radios.


On Mon, Oct 14, 2019 at 2:13 PM Randal Rutkowski <randyrutkowski@...> wrote:
I use both the baofeng and yaseu with a duplexer since I don’t have a true Full Duplex HT.  It all works fro me with a coat hanger dipole built from a project page on ARRL magazine.  I am probably in the same boat as you are.  I have zero luck with PC programming the Chinese but my patients wears thin.  I do programming manually.
Randy
KM6RBG


On Oct 14, 2019, at 10:12 AM, Siegfried Jackstien <siegfried.jackstien@...> wrote:



the low end chinese ht are not superb ... but they are usable

signal is not superclean so i would not use it with a kilowatt amp on a 4x19 el array on a contest ... but on a small yagi ... towards a leo ... you will not hurt anybody ... means ... not good but usable

same on receive side ... these ht can not work in a rf noisy areas or with big big antennas cause their frontend is as wide as an open barn door... but it is ok for using it on smaller antennas on your local repeater (or on a small yagi towards a leo that also acts like a local repeater for a few minutes) ... so also on receive ... not good ... but usable

so i would sum it up with ... use it ... have fun with it ... and you can buy a better (fullduplex?) ht later

see if you can get your hands on a used ft470 or similar ... but that can be done later if you really think to buy a new (used) dualband ht

if you then after a few dozen passes think to get that better ht (or find a good one on next hamfest) ... you can sell the chinese ht WITH the programming cable ... so nothing is lost

greetz sigi dg9bfc

Am 14.10.2019 um 13:06 schrieb Marty Bluhm:
Good Morning, first timer so please bear with me.
Would like to check out the sats.
I have an Elk antenna for use
A friend gave me a GT3-TP handheld to use. It is in a virgin state with nothing programmed into it.
Reading in the archives plus other sources,
I’ve came up with a shopping list.
It includes a programming cable, a coaxial adapter from 259 to sma and an external Mike/speaker.

Now the kicker, while researching this, I found a comment to the effect “extensive research has found the lower end Chinese radios to be complete rubbish”
Before I purchase the above items, is this a true statement?
Apart from spending the money, the frustration of buying and not being able to use it would be the pits.
Has anyone used this ht on the sats?
Is it is worthwhile or am I spinning my wheels leading to a frustrating and eventual disappointment.
Thanks and 73
Marty
W8AKS


Re: GT-3TP Satellite Usage

Randal Rutkowski
 

I use both the baofeng and yaseu with a duplexer since I don’t have a true Full Duplex HT.  It all works fro me with a coat hanger dipole built from a project page on ARRL magazine.  I am probably in the same boat as you are.  I have zero luck with PC programming the Chinese but my patients wears thin.  I do programming manually.
Randy
KM6RBG


On Oct 14, 2019, at 10:12 AM, Siegfried Jackstien <siegfried.jackstien@...> wrote:



the low end chinese ht are not superb ... but they are usable

signal is not superclean so i would not use it with a kilowatt amp on a 4x19 el array on a contest ... but on a small yagi ... towards a leo ... you will not hurt anybody ... means ... not good but usable

same on receive side ... these ht can not work in a rf noisy areas or with big big antennas cause their frontend is as wide as an open barn door... but it is ok for using it on smaller antennas on your local repeater (or on a small yagi towards a leo that also acts like a local repeater for a few minutes) ... so also on receive ... not good ... but usable

so i would sum it up with ... use it ... have fun with it ... and you can buy a better (fullduplex?) ht later

see if you can get your hands on a used ft470 or similar ... but that can be done later if you really think to buy a new (used) dualband ht

if you then after a few dozen passes think to get that better ht (or find a good one on next hamfest) ... you can sell the chinese ht WITH the programming cable ... so nothing is lost

greetz sigi dg9bfc

Am 14.10.2019 um 13:06 schrieb Marty Bluhm:
Good Morning, first timer so please bear with me.
Would like to check out the sats.
I have an Elk antenna for use
A friend gave me a GT3-TP handheld to use. It is in a virgin state with nothing programmed into it.
Reading in the archives plus other sources,
I’ve came up with a shopping list.
It includes a programming cable, a coaxial adapter from 259 to sma and an external Mike/speaker.

Now the kicker, while researching this, I found a comment to the effect “extensive research has found the lower end Chinese radios to be complete rubbish”
Before I purchase the above items, is this a true statement?
Apart from spending the money, the frustration of buying and not being able to use it would be the pits.
Has anyone used this ht on the sats?
Is it is worthwhile or am I spinning my wheels leading to a frustrating and eventual disappointment.
Thanks and 73
Marty
W8AKS


Re: GT-3TP Satellite Usage

Siegfried Jackstien
 

the low end chinese ht are not superb ... but they are usable

signal is not superclean so i would not use it with a kilowatt amp on a 4x19 el array on a contest ... but on a small yagi ... towards a leo ... you will not hurt anybody ... means ... not good but usable

same on receive side ... these ht can not work in a rf noisy areas or with big big antennas cause their frontend is as wide as an open barn door... but it is ok for using it on smaller antennas on your local repeater (or on a small yagi towards a leo that also acts like a local repeater for a few minutes) ... so also on receive ... not good ... but usable

so i would sum it up with ... use it ... have fun with it ... and you can buy a better (fullduplex?) ht later

see if you can get your hands on a used ft470 or similar ... but that can be done later if you really think to buy a new (used) dualband ht

if you then after a few dozen passes think to get that better ht (or find a good one on next hamfest) ... you can sell the chinese ht WITH the programming cable ... so nothing is lost

greetz sigi dg9bfc

Am 14.10.2019 um 13:06 schrieb Marty Bluhm:

Good Morning, first timer so please bear with me.
Would like to check out the sats.
I have an Elk antenna for use
A friend gave me a GT3-TP handheld to use. It is in a virgin state with nothing programmed into it.
Reading in the archives plus other sources,
I’ve came up with a shopping list.
It includes a programming cable, a coaxial adapter from 259 to sma and an external Mike/speaker.

Now the kicker, while researching this, I found a comment to the effect “extensive research has found the lower end Chinese radios to be complete rubbish”
Before I purchase the above items, is this a true statement?
Apart from spending the money, the frustration of buying and not being able to use it would be the pits.
Has anyone used this ht on the sats?
Is it is worthwhile or am I spinning my wheels leading to a frustrating and eventual disappointment.
Thanks and 73
Marty
W8AKS


Re: GT-3TP Satellite Usage

David Spoelstra
 

I have worked all the FM sats with a Baofeng UV-5R. It's definitely harder since you can't hear yourself, but I've done it. I usually wait for a pass that isn't full of people on top of each other.
-David, N9KT


On Mon, Oct 14, 2019 at 12:35 PM Marty Bluhm <w8aks55@...> wrote:
Good Morning, first timer so please bear with me.
Would like to check out the sats.
I have an Elk antenna for use
A friend gave me a GT3-TP handheld to use. It is in a virgin state with nothing programmed into it.
Reading in the archives plus other sources,
I’ve came up with a shopping list.
It includes a programming cable, a coaxial adapter from 259 to sma and an external Mike/speaker.

Now the kicker, while researching this, I found a comment to the effect “extensive research has found the lower end Chinese radios to be complete rubbish”
Before I purchase the above items, is this a true statement?
Apart from spending the money, the frustration of buying and not being able to use it would be the pits.
Has anyone used this ht on the sats?
Is it is worthwhile or am I spinning my wheels leading to a frustrating and eventual disappointment.
Thanks and 73
Marty
W8AKS