Hi, Here is a picture of my special effect rig for the movie I am doing. The motion control camera setup is driven by my HP-9920. It needs to control both axis motors, plus the projector focus and the

I'm looking for a copy of 08510-10024 to have or purchase. Prefer the 3.5 disk but can copy from a 5.25 for my needs. Thanks, Clay

I just purchased a known non-working HP 9845A that is otherwise complete and in great cosmetic shape. The only thing it does when power is switched on is to run the fan. No other lights, beeps, or any

Hello, I am interested in making a set of replacement keycaps for the 9830A. The Cherry MX SA profile keys from SIgnature Plastics fit (with some pressure), and their color palette has some close matc

Does anyone have a copy of the ERS or diagrams of the 12745A HP-IB 13037 interface? I have a working 7906A with a 13037D interface with a 12745A HP-IB interface installed and I suspect the HP-IB inter

Anyone have ideas about a good matching color to repaint a case? Manuel

I'd like to disable the battery backup option on a couple of newly acquired 1000 series power supplies. I'm looking for two 5061-1351 jumper cards; happy to send you a set of 5061-1348/5061-1349 batte

I recently received several 2112B machines and I'm mixing and matching bits and pieces. The systems came from a telecom research center and were very heavy on interface cards, so I have lots of excess

I should know this but I've forgotten and haven't been able to find a reference. For 1000 M-E-F power supplies equipped with the battery backup option, there is a plug that goes into the BAT INPUT rec

There is a drive emulator on Ebay (not mine). Emulates HP79XX drives. Perhaps of interest to someone. https://www.ebay.com/itm/275310974648

Has anyone informations (manuals, schematics) of a HP21xx interface CAMSCO P/N 80054? There is a hand written "16 bit duplex" on the PCB, but thats everything I know. Is this possibly compatible with

The following files and folders have been uploaded to the Files area of the VintHPcom@groups.io group. /12554A_OperatingAndServiceManual_12554-90021_50pages_Aug69.pdf By: Stephen Hanselman <kc4sw.io@.

hi all, this is my first post / i am new here, so hello and thank you for reading. i have bought recently two HP 64000 + a lot of material with it for 200CHF from the son of the previous owner who him

The following files and folders have been updated in the Files area of the VintHPcom@groups.io group. /HP 9000 Series 200 300/Hardware related/9826CONF.BIN By: Rik Bos <hp-fix@...> Description: HP 982

Hello , I have two HP2649A Terminals for sale, One is in ok condition, and the other one have been forced open with damage to the case and locking mechanism. The damaged one had 8 boards inside, that

Searching for a new home

Does anyone have mechanical drawings for the HP "Kittyhawk" disk drives, C3013A, C3013B or C3014A? I'm looking for CAD drawings, specifically the mounting screw coordinates and outline dimensions. Oh,

Hello at all, I'm new in this group and would like to get in contact with people owning a HP250 or who are familiar with this computer. Such a computer is used in my museum as a living exhibit . Am I

I recently obtained an early (1981) 9836A with the 2.0 Boot ROMs. It has the first CPL board with 64 KB RAM and no MMU (no "U" model). I am wondering whether it is possible to install later (e.g. 3.0)

I'm fabricating a new 10-conductor ribbon cable for my HP 9845A to replace the original defective cable. The connectors on the original cable have a white nylon hole plug in one position of the female