I’ve looked into building a HP-HIL to USB interface a bit and it’s going to be a little bit of work: The approach that I’ve planned to take whenever I try this again is to use an AVR or two solely as

Hi all, a few days ago I noticed the time coming near for the 50th aniversary of the first series 9800 calculator. I digged a bit in some documents from the design of the 9800 series in 1970/71 and fo

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the VintHPcom@groups.io group. /HP1000/General Information and Newsletter/D

Hi I got a large assortment of vintage hp cards here is a pic of some of what I have

My 340 is on its way, so I guess I need an image to boot from one of these days. Can some kind soul provide one? Preferably a flat (HPI) file? Also: The manual seem to indicate that the 340 can boot f

Any ideas? I do not have a 10Mb/s hub (yet), but I plugged a 50 ohm teminator into the network BNC socket, via cable.

Wanted: Graphic that shows the key assignments of the ITF (46021?) Keyboard. I have searched, but not found anything but photos. This is to document the mappings in my emulator.Found this table though

Any idea what these 239 - 21xx chips might be? My Googling is failing me on this one. :) They reminded me of the the 1820- series in my HP2100. Seems like a similar naming convention?

Will collect them in a this thread so as not to clutter the forums :) First question: What should I select for terminal type on a 9000 340? The default works, but that apparently assumes another keybo

I have booted, but cannot seem to log in. I have booted the HP-UX 7 fullsys image and when I get to the login I try "root" with no password, "root" root", "admin" "admin" etc, but get incorrect login

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the VintHPcom@groups.io group. /HP9111A Graphics Tablet/9111A_Schematics.zi

Can someone, perhaps @Ansgar can shed some light on this? Take the BASIC5 Utilities 1 disk as an example. When emulating I can run it just fine as AMIGO, but with SS/80 I run into problems that seem t

Does anyone have an example? I just need this to test my keyboard emulator.

I have an old HP7946A Disc/Tape drive with a dead power supply. No voltages, fuses intact, no physically blown components or traces. It's a Boschert XL183-3S03R, HP P/N 07942-60024. Before I dig into

Hi, does anyone know where I can find the schematics (and maybe even the firmware dump) of the HP 9111 tablet, please? I was thinking about studying this interesting piece of hardware in deep. I looke

I can buy a 9000 340 system with some extras: HP 98751A - Monitor • HP 46087B - Digitizer / Tablet Met Pen • HP 46021A - Keyboard • HP 9144 - Tape Drive, HP 9122 floppy disk • HP 9000 340 The asking p

Hi -- We have a problem (another one). Could use some advice. Just got really moving with the L series box, and thought I'd try to bring the 1000 E along at the same time. This machines was refurbed b

Assuming a HP 9000 Series 300 Model 340 can one access it from a serial terminal, either over the serial port or the LAN port?

Hi -- Can I just check the experience of others who've debugged VCP loading on the 1000A? I'm attempting to get my A600+ to boot over a 12009A HP-IB interface from Rik's disk image hosting on a PC run

I’d like to add a 98574A to my HP 9000-332 system, replacing the 98543A I’ve been using since the latter is hard to make work nicely with a multi-sync LCD. Is anyone interested in parting with one? —