|
HP 9836 newbie
Sorry for the misunderstanding. I am already trying to improve my english knowledge. The developing of HPDisk is an essential help to keep old HP-IB Disk based system running. And I am thankful for pe
Sorry for the misunderstanding. I am already trying to improve my english knowledge. The developing of HPDisk is an essential help to keep old HP-IB Disk based system running. And I am thankful for pe
|
By
Roland Dietiker
· #8578
·
|
|
HP 9836 newbie
sorry I mean lucky instead of looky.... Am 06.08.2022 um 11:30 schrieb Roland Dietiker:
sorry I mean lucky instead of looky.... Am 06.08.2022 um 11:30 schrieb Roland Dietiker:
|
By
Roland Dietiker
· #8574
·
|
|
HP 9836 newbie
In my opinion, is your solution preferable over the HP-IB Card - PC solution, because the disk is a small board and not depending of HP-IB Interface and PC or Client. But I am looky with both, except
In my opinion, is your solution preferable over the HP-IB Card - PC solution, because the disk is a small board and not depending of HP-IB Interface and PC or Client. But I am looky with both, except
|
By
Roland Dietiker
· #8573
·
|
|
HP 9836 newbie
Sorry I don't follow this information. What did it mean? Am 06.08.2022 um 09:23 schrieb Anders:
Sorry I don't follow this information. What did it mean? Am 06.08.2022 um 09:23 schrieb Anders:
|
By
Roland Dietiker
· #8570
·
|
|
Would anyone be interested if I created a PCB design for an OOBIO-connector for the HP-1000 and made it public?
Well done! Thanks Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] Im Auftrag von Anders Gesendet: Donnerstag, 14. April 2022 17:11 An: VintHPcom@groups.io Betreff: Re: [VintHPcom] Would anyone b
Well done! Thanks Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] Im Auftrag von Anders Gesendet: Donnerstag, 14. April 2022 17:11 An: VintHPcom@groups.io Betreff: Re: [VintHPcom] Would anyone b
|
By
Roland Dietiker
· #7871
·
|
|
How about a new HP 1000 A-series RAM board?
I would like to clarify the memory question. There are in fact two lines of memory types: - Parity memory (A600/A600+, A700 and A400) - ECC memory for A600 and A700 - different layout - ECC Memory for
I would like to clarify the memory question. There are in fact two lines of memory types: - Parity memory (A600/A600+, A700 and A400) - ECC memory for A600 and A700 - different layout - ECC Memory for
|
By
Roland Dietiker
· #7868
·
|
|
Recreating the HP 1000 6-slot backplane?
Yes, the fan in the 16 slot box are dual speed controlled. With the A400 you need a minimal flow of air through the cards for cooling. The box could be also 90 degree turned, so you get the stack-effe
Yes, the fan in the 16 slot box are dual speed controlled. With the A400 you need a minimal flow of air through the cards for cooling. The box could be also 90 degree turned, so you get the stack-effe
|
By
Roland Dietiker
· #7828
·
|
|
Tape drive emulation and filemark handling?
Thanks, interesting document about this topic. Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] Im Auftrag von Anders Gesendet: Freitag, 8. April 2022 12:40 An: VintHPcom@groups.io Betreff: Re: [
Thanks, interesting document about this topic. Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] Im Auftrag von Anders Gesendet: Freitag, 8. April 2022 12:40 An: VintHPcom@groups.io Betreff: Re: [
|
By
Roland Dietiker
· #7805
·
|
|
Booting RTE-A from emulated tape?
Is it not 0x400? -> 1024 blocksize? Maybe this:12016-13504 FST 12016A 5250 SCSI/1000 12016-13304 REV: 5250 SCSI/1000 CT-CS80 92860-13301 FST 92860A 5260 Symbolic Debug/1000 92860-13301 REV: 5260 CT-DE
Is it not 0x400? -> 1024 blocksize? Maybe this:12016-13504 FST 12016A 5250 SCSI/1000 12016-13304 REV: 5250 SCSI/1000 CT-CS80 92860-13301 FST 92860A 5260 Symbolic Debug/1000 92860-13301 REV: 5260 CT-DE
|
By
Roland Dietiker
· #7779
·
|
|
Booting RTE-A from emulated tape?
Look a bit better: ….but…. Date of 1970 sound very to Backup from FMGR cartridge (diskvolume). But no warranty for multiple archives on the same tape… Von: VintHPcom@groups.io [mailto:VintHPcom@groups
Look a bit better: ….but…. Date of 1970 sound very to Backup from FMGR cartridge (diskvolume). But no warranty for multiple archives on the same tape… Von: VintHPcom@groups.io [mailto:VintHPcom@groups
|
By
Roland Dietiker
· #7777
·
|
|
Booting RTE-A from emulated tape?
Sorry it looks not good: I get the impression this was done with FMGR, and no Archive sections.. Note: FST is able to write the backup direct to a diskfile, but without multiple archives support. No c
Sorry it looks not good: I get the impression this was done with FMGR, and no Archive sections.. Note: FST is able to write the backup direct to a diskfile, but without multiple archives support. No c
|
By
Roland Dietiker
· #7775
·
|
|
Booting RTE-A from emulated tape?
Restore with: ROM loader, FMGR: sounds to much for 21MX Serie (RTE-6/VM). We need a VCP loadable image for A-Series. I will provide one for you. Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] I
Restore with: ROM loader, FMGR: sounds to much for 21MX Serie (RTE-6/VM). We need a VCP loadable image for A-Series. I will provide one for you. Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] I
|
By
Roland Dietiker
· #7773
·
|
|
Booting RTE-A from emulated tape?
Sorry, not complete correct: %xDC is to oad/or boot from CS/80 SS/80 devices like disk or CTD. %xMT is for Tape like DDS,Reel Tape, DLT, but not for CTD even it seems to be a tape! %xCD is not a valid
Sorry, not complete correct: %xDC is to oad/or boot from CS/80 SS/80 devices like disk or CTD. %xMT is for Tape like DDS,Reel Tape, DLT, but not for CTD even it seems to be a tape! %xCD is not a valid
|
By
Roland Dietiker
· #7771
·
|
|
Tape drive emulation and filemark handling?
The EXEC communicate direct to the device driver. Ref 92077-90013 Sys Des Mnl Page 7-1 Ref: Driver design Mnl 92077-90019 The EXEC connect the Device Driver –> Interface Driver –> HP-IB Controller on
The EXEC communicate direct to the device driver. Ref 92077-90013 Sys Des Mnl Page 7-1 Ref: Driver design Mnl 92077-90019 The EXEC connect the Device Driver –> Interface Driver –> HP-IB Controller on
|
By
Roland Dietiker
· #7760
·
|
|
Tape drive emulation and filemark handling?
On page 2-81 of DRV Ref Mnl title CLOSE CACHE they write about the posting of the cache to the tape (Subfunction 2). The “2” is missing in the table 2-9. Is this supported by HPDrive and HPDisk? Von:
On page 2-81 of DRV Ref Mnl title CLOSE CACHE they write about the posting of the cache to the tape (Subfunction 2). The “2” is missing in the table 2-9. Is this supported by HPDrive and HPDisk? Von:
|
By
Roland Dietiker
· #7757
·
|
|
Tape drive emulation and filemark handling?
XCOPY calls at least XLUEX and is a superset. Note: FST uses direct XLUEX and VMAIO level. I will also check source of ASAVE/ARSTR there seems to be a similar problem. Von: VintHPcom@groups.io [mailto
XCOPY calls at least XLUEX and is a superset. Note: FST uses direct XLUEX and VMAIO level. I will also check source of ASAVE/ARSTR there seems to be a similar problem. Von: VintHPcom@groups.io [mailto
|
By
Roland Dietiker
· #7756
·
|
|
Tape drive emulation and filemark handling?
B_Reg is the counter of the characters or words in the buffer, depending if “length” negative or positive. Check Prgrm Manual exec calls Read/write Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io
B_Reg is the counter of the characters or words in the buffer, depending if “length” negative or positive. Check Prgrm Manual exec calls Read/write Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io
|
By
Roland Dietiker
· #7752
·
|
|
HPDrive: 7914 Disk and CTD Tape
Okay, you got it! I was trying to solve the Captanproblem, but you will see. Roland Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] Im Auftrag von Rik Bos Gesendet: Mittwoch, 30. März 2022 15:17
Okay, you got it! I was trying to solve the Captanproblem, but you will see. Roland Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] Im Auftrag von Rik Bos Gesendet: Mittwoch, 30. März 2022 15:17
|
By
Roland Dietiker
· #7744
·
|
|
HPDrive: 7914 Disk and CTD Tape
….yes this is really true. Capstan and I tried 3 Tapes Media. And the belt…. I am so frustraded, that I give my two 9144A, one 9145A and Tapes for free away. Only charge for transportation from switze
….yes this is really true. Capstan and I tried 3 Tapes Media. And the belt…. I am so frustraded, that I give my two 9144A, one 9145A and Tapes for free away. Only charge for transportation from switze
|
By
Roland Dietiker
· #7742
·
|
|
HPDrive: 7914 Disk and CTD Tape
I own 2x9144 and one 9145. I did not plane to enlarge to zoo… The Capstan is the week point after 20 years… Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] Im Auftrag von Anders Gesendet: Mittwo
I own 2x9144 and one 9145. I did not plane to enlarge to zoo… The Capstan is the week point after 20 years… Von: VintHPcom@groups.io [mailto:VintHPcom@groups.io] Im Auftrag von Anders Gesendet: Mittwo
|
By
Roland Dietiker
· #7737
·
|