Today I started what I hoped would be a fairly straight forward change from a rotator loop of RG213 to something better on my 23cm antenna. However, things didn't go to plan. On removing the preamp fr

I bought a 40 GHz HP 5352B from eBay for £200. https://www.ebay.co.uk/itm/HP-AGILENT-KEYSIGHT-5352B-MICROWAVE-FREQUENCY-COUNTER-40-GHz-/165492446615 Not having a 40 GHz source, I got the frequency cou

Hi Guys Wonder if anyone out there has had problems trying to get a directive systems dual feed for 3 and 6 cms working properly .I emailed directive systems some time back but received the "we have o

I seem to have mislaid my manual/data sheet for my SGLabs 3400MHz transverter. I have looked on the SGLabs web page but can't even see the transverter now listed, let alone the data? I wonder if anyon

I will be active from about 12noon BST. IO85UU Hope to work somebody! 73 Pete GM4BYF -- vry 73 Pete GM4BYF

Thanks for your inputs for the activity list for this Sunday's UKuG 5.7GHz and 10GHz contests, which run 0600-1800z (0700-1900 BST). Full rules are here: https://www.microwavers.org/files/2022-mwrules

The first of this year's series of UKuG 5.7GHz and 10GHz contests takes place on Sunday 29th May from 0600-1800 UTC (0700-1900 Clock time). Entrants can operate for up to 8 hours during this period. F

Does anyone know why wtKST no longer works ? John G4ZTR

Has anyone got a 23cm transverter they want to sell? Rich G8ZHA

Hi All I seem to have a very deaf IC-1275e the suspect device is, I believe, a MGF1302 ?? Can anyone please confirm that this is the first device in the RX line? I think I've seen it [the MGF1302] pub

Hi all, Just got a pristine Microwave Modules MML432/50 amp from a SK sale. Anyone got a copy of the schematic for this amp please ? Google throwing up zilch. Probably an older version, no switches on

all being well, no rain, I will be on 9/3 tonight G4BXD IO82UJ 9CM 20W 20DB PANEL 3CM 6W 46CM PF Will watch KST. I know most will be on 13 but spare a thought for those of us who only have so much pol

Many thanks to Dave, G8GKQ for the MML432/50 manual, Thanks also to other gentlemen for help. Best regards Colin de G8LBS. Sent from Mail for Windows

Long shot I know, anybody have a power lead or plug for an Icom IC202S or know of a source. Thanks, Chuck GM8GIQ

I went out to my usual /p spot on 23cm last Tuesday working a few PAs who were complaining of radar qrm. I did notice some strange noise that momentarily sent the 9700 into OVF (sglab preamp and a ztr

Hi All I have retrieved all the intact ex 5.8GHz link large 'WiFi' antennas and have just finished testing them. I got a couple of the smaller antennas to investigate too. Most of the large antennas w

The device is specced 40W @ 3400, SMA in and out and there is a circulator too. As he has a quantity, I suspect these are working pulls from a decommissioned system rather than stuff gone bang. Not ba

To all I am looking for a RFhamdesign 24HZ2 Linear hornfeed for 24 Ghz, I have decided to go waveguide for 24 GHz moon bounce. RFham design say it is no longer available, if someone has a unit they do

It's the EU digital modes (not just FT8, any MGM) on Wednesday 18th April 2022 from 17:00 to 21:00 UTC. Will anyone be taking part again? I'll have a look round the usual frequencies. Dave (G0DJA) IO9

Up until a couple of weeks ago my last activity on 6cm was 38 years ago. Back then the value of RS on 3cm was regularly demonstrated working G3JVL & G3YGF as I lay under their path when I lived in Ham