Does anyone know the electrical specifications of the SC connector? The best specification I have seen for VSWR is 1.25:1, which is a return loss of around 19 dB. Some SC bits seem to be rated to 8, 1

Hello everyone. I am traveling to the Isle of Man for work next week and will be taking my portable 10GHz station along with me (1W with a 30cm dish). Weather depending, I should be able to be active

I have a number of my X24 multipliers for disposal. These are unboxed but look to be fully populated with components. The board is normally on good behaviour unboxed. They will drop in frequency for a

I have for disposal at RAL a 50cm diameter Flann lens horn WG20. Gain at 24G is around 41dbi according to Flann info. Also a second WG20 50cm horn but has the lens missing so the gain will be less by

I've been looking at the RSGB guidance for 24 GHz. I found 24, 47 and 76 GHz which says: "24GHz: Note that no operation is currently permitted in the UK at 24050-24150, nor is any new activity recomme

Hi All, I'd like to get started on 24ghz, maybe someone has gear they want to sell or can help me find what's needed. I have no means of testing or the knowledge to homebrew circuits etc so any help w

I'm looking for some SC open, shorts, and loads, as well as adapters to APC7 or N. If you have any, please get in touch. I see this open cal standard on eBay with an SC connector, https://www.ebay.com

The date for the GM round table has been confirmed as Saturday 11th Nov 2023, to be held at the Museum of Communication, Burntisland, Fife. The programme and other details are here :- https://gmroundt

I have registered for RAL. I intend to bring some of the late G3LQR’s bits and pieces to sell on behalf of his family. G3LTF and a group of locals, including myself, have started the clear out of his

Just to add to the list of equipment for sale, I plan to bring an HP 8620C Sweep Oscillator C/W 86222B and 86250D plug-ins (0.01 to 2.4GHz and 8 to 12.4 GHz respectively) The 86222B has an unlevelled

G8KHU and G1TVL have a quantity of used test equipment which is now surplus to requirements due to imminent retirement. If anyone is interested please contact off list. We'd prefer to offer to people

Hello, I am hoping to buy some LDF4-50 from John G8ACE at RAL, however I will be in San Diego that week, so will be home too late to attend. I was wondering whether there was anybody from South Wales/

So several years ago purchased a new TVRO 1.8m petal style dish (indian made). The arms weren't well made but they did line up and I was using the thing on QO100 for a while. Anyway to cut a long stor

I have a couple of these medium-chunky PSUs for sale - all money raised will go to the Bell Hill Beacons [*]. I want £40 each for these - and remember it all goes to GB3SCS/C/F/X/K/Q Let me know by PM

The next session of the UKuG Low Band contest series on 1296,2300,2320, and 3400MHz will take place this Sunday from 1000 - 1600 GMT (1100 - 1700 BST). This date coincides with the IARU Region 1 Micro

Folks, I have uploaded a PDF, to my web page, showing some of the ex-G3LQR items I intend to bring to RAL. Www.g4ddk.com and follow the PDF link. Last evening's link has been removed as it failed badl

For 13cms EME , does anybody have a OK1DFC square septum feed ideally with choke or a SM6FHZ septum feed spare that they no longer need ? Just asking before I build my own Can collect most places main

I have used several of the ADF4351 PLL boards as generators of LOs for my projects, both the Greek quality item and the 'others' from eBay or Aliexpress. Some of the later boards turned up with quite

I can bring approximate (comparative +/- 0.2 dB and absolute +/- 2 dB) 24 GHz noise figure measurement equipment to RAL. SMA connector. Perhaps someone else could bring a decent WG transition? Also I'

On Friday I have a site meeting with the Waterboard to agree where 'they will core drill ' to provide access for cables. They are really being very helpful ! I am hopeful that the postal service will