The first of this year's series of UKuG 5.7GHz and 10GHz contests takes place on Sunday 29th May from 0600-1800 UTC (0700-1900 Clock time). Entrants can operate for up to 8 hours during this period. F

Does anyone know why wtKST no longer works ? John G4ZTR

Has anyone got a 23cm transverter they want to sell? Rich G8ZHA

Hi All I seem to have a very deaf IC-1275e the suspect device is, I believe, a MGF1302 ?? Can anyone please confirm that this is the first device in the RX line? I think I've seen it [the MGF1302] pub

Hi all, Just got a pristine Microwave Modules MML432/50 amp from a SK sale. Anyone got a copy of the schematic for this amp please ? Google throwing up zilch. Probably an older version, no switches on

all being well, no rain, I will be on 9/3 tonight G4BXD IO82UJ 9CM 20W 20DB PANEL 3CM 6W 46CM PF Will watch KST. I know most will be on 13 but spare a thought for those of us who only have so much pol

Many thanks to Dave, G8GKQ for the MML432/50 manual, Thanks also to other gentlemen for help. Best regards Colin de G8LBS. Sent from Mail for Windows

Long shot I know, anybody have a power lead or plug for an Icom IC202S or know of a source. Thanks, Chuck GM8GIQ

I went out to my usual /p spot on 23cm last Tuesday working a few PAs who were complaining of radar qrm. I did notice some strange noise that momentarily sent the 9700 into OVF (sglab preamp and a ztr

Hi All I have retrieved all the intact ex 5.8GHz link large 'WiFi' antennas and have just finished testing them. I got a couple of the smaller antennas to investigate too. Most of the large antennas w

The device is specced 40W @ 3400, SMA in and out and there is a circulator too. As he has a quantity, I suspect these are working pulls from a decommissioned system rather than stuff gone bang. Not ba

To all I am looking for a RFhamdesign 24HZ2 Linear hornfeed for 24 Ghz, I have decided to go waveguide for 24 GHz moon bounce. RFham design say it is no longer available, if someone has a unit they do

It's the EU digital modes (not just FT8, any MGM) on Wednesday 18th April 2022 from 17:00 to 21:00 UTC. Will anyone be taking part again? I'll have a look round the usual frequencies. Dave (G0DJA) IO9

Up until a couple of weeks ago my last activity on 6cm was 38 years ago. Back then the value of RS on 3cm was regularly demonstrated working G3JVL & G3YGF as I lay under their path when I lived in Ham

Sad news. I bought many an interesting bit of kit from Birkett's. I remember happening to pass his shop on a Saturday late afternoon. Although closed, I saw John loading kit for a rally the next day,

This is described as a THz laser, covering 0.3 to 3 THz. Personally I would consider it a maser, not a laser. Apparently It's tunable over 120 frequencies. https://www.mwrf.com/technologies/systems/ar

Can anyone point me in the direction of a Low Noise preamp for 3cm? I need coaxial input and output. Paul G8AQA

I've treated myself to a very nice BNIB 60cms Andrews dish from a 24GHz P2P system. It has a rear mounted ODU from which I have removed the feed arrangement, its two arms tuned to the separate RX and

I have gained a Rubidium Source, it's a Traycor 304DR. I've tried looking for information about on the web it without success. The only information I found was that Traycor merged into BAC many moons

Yesterday I ventured out to Butser Hill with my new CBBN 10GHz transceiver set up, along with a similar Wavelab module arrangement for 24GHz. The main purpose was to test on DATV, but first of all I u