Is anyone using (or plotting to use) a Hermes Lite 2 as IF for microwave transverters? I'm intending to use one with an Anglian or 70cm transverter but would like to share the pain and gnashing of tee

I believe everyone who has ordered one, has had an email this afternoon with a tracking number. If not please contact me. 73 Dave G4IUG Ex G8EAO

Ive have an Eltek 53.5V 18.7A one if anyone is still after one -- Mike GD6ICR IO74PF73TW

Having succeeded in getting operational on 23, 13, 9 and 3Cm in the past 12 months that leaves 6Cm to sort out. With the Kuhne transverter being 600 Euro (£530 today) I was wondering if there were any

Correction, the marking on the filters says 5.4 – 5.9GHz. 73’s G8LBS. Sent from Mail for Windows 10

I now have requests for 62 of the silver-plated F6BVA 10 GHz-UHF transverter PCBs, and several more tentative enquiries. The group buy for the first batch of 50 is now closed, so I am collecting expre

Hello, The talk on 'Starting Out on Microwaves' which I gave last night as part of the RSGB 'Tonight at 8' series of webinars is now available on the RSGB YouTube channel https://youtu.be/lNWG7dLhh7s

Gentleman, 24G season will be starting soon. Who of you is permanently QRV? Here 2.5W 1.1 m dish ... JO31FX. 73 Gerard PA0BAT Op 30 jan. 2021 3:19 p.m. schreef "Steve G4HTZ via groups.io" <essexsteve@

Hello all After due consideration, and an exchange of emails with I0JXX, I'm proposing to import a few of his feeds for resale in the UK. The purpose of this mail is to establish the likely interest.

I have just sent an email to Mini-kits in VK, enquiring about a couple of PCBs and received this reply: Sorry we can no longer ship to the UK due to changes to your tax system. https://www.minikits.co

One of the components recovered from the old Eaton Spec an last year is a PMI-5074 "Peripheral Mode Isolator" It was used in the YIG LO feed to the frequency locking circuitry, and is described in the

All, High Power DC 5V-36V 15A 400W MOSFET Trigger Switch Drive Module Total: £5.99 per pair. Order number: 15-06479-48440 Item number: 133549042395 2 x modules arrived this morning. Rather amused to s

"Evanescent filters are so easy to throw together, and drilling too many tapped holes while just playing around .... ". This from Mr "I don't do mechanical things " LOL. As Andy says WG16 does work we

If anyone in the UK is considering building an F6BVA 3cm to UHF transverter, there is a group purchase under way for the PCBs. To save on carrier fees, I am happy to receive boards for other UK purcha

These were mentioned by Andy JNT in his Design Ideas for the Dec RadCom. I looked on the Menlo web site but only see 3 devices, all of them more complex than the SPDT we normally need for amateur desi

Does anyone know how to take apart a round attenuator? I have a Weinschel 50W one faulty. Thought I'd try and look inside. Looks like the fins screw off the body? Ben.

Hi All Any body out tyhere got a RF ham Design 24HG2 Milled Horn surplas they want to sell on Many thanks Denis G0OLX

I'm looking for a short length of WG15/WR112 to make an evanescent mode filter for 13cm If anyone has some to spare, please email me off line. Thanks and 73 Howard, G4CCH

I have a Hermes Lite 1 (essentially much the same as the HL2, but minus much of the analogue I/O circuitry). I built mine a few years ago with the idea of using it as a microwave IF. Although with HB

Hi all, unable to find paper work for my kuhne G4 10ghz transverter. What is the recommended i/p pwr for the 10mhz ref? Cheers Chris G0WUS