Someones QC needs looking at!

I have uploaded in the files area a list of manufacturers also on my web site http://f1chf.free.fr/hyper/quartz_story.htm if you have any inputs, don't hesitate 'sorry it is in French ... oupps ! Fran

The following files have been uploaded to the Files area of the UKMicrowaves@groups.io group. /Quartz Crystal manufacturers/quartz_story.htm By: F1CHF Description: quartz manufacturers (in French ...

Gidday Keith DownEast Microwave in the USA has them for $150 see model L4-2ULNA Best 73 Barry VE4MA

As part of the GB3KBQ refurb I need to purchase a 108.0090622 MHz crystal I have to admit it is a long time since I bought a crystal ..however I had not realised that things had changed so much in the

Good Morning All I have also posted this on the 122GHz group. Earlier this year I co-ordinated a group purchase of Silicon Radar 122 GHz and 24 GHz devices (50+ devices) so that we could split Si Rada

Greetings to all readers! I am wondering please if someone reading this message has practical experience with the internal construction and circuitry of AVANTEK microwave amplifier modules such as the

Does anyone have a data sheet or calibration information for this detector that they could send to me? Tnx Geoff G4AKW

Hi all Can any one help me as I am looking for a small oscilloscope 12 volts powered Preferably a Tektronix 314 or 335 or possibly a 305 preferably working Regards Paul -- Paul Bicknell G8KFW South Co

A long time ago I built a couple of thru lines using Yorkshire plumbing fittings to use on 23cm and 70cm to check antenna matching. The plan was to make a poor man's Bird Meter but I only ever made on

Had to laugh. In a recently published dribble I wrote: These are A: the hard way and B: the easy way. Method A had the least attraction for me. Those choosing method A usually come from or have a mech

Can anyone point me to a datasheet for a Micronde coax relay that I've fished out of the junk box?. The inscription I can make out is "R 554 432". The two separate solenoids have about 32 ohm resistan

PP selling a lot of stuff from BBC Cardiff, Lots of tables and chairs etc. but in there is: Lot 2371 3x Xicom TWTA travelling wave tube amplifiers (spares or repair) No picture, no type No.! I think t

Right then, 4 more cut out, 2 more to cut in the morning, but I have lost track to some extent of who it was that wanted them .. and indeed who I sent them to in batch 1! I think I sorted Nick HIK and

Hi all, upon switching on the shack this morning my first check is always the UK beacons GB3MHZ (1296.830 2320.830 and 3400.830). The first two are practically always audible imo not bad at 280km Turn

Anyone know of a source of 3.4GHz flat panel antennas? Have found this on ebay http://tiny.cc/qds4tz which is decribed as 3.5-3.6GHz has anyone tried one of these? Thanks -- Nigel G8IFN

I'm having trouble deciding which is the problem item out of my Marconi 6960B and measuring head ... I bought them in differing places, the head was supposed to be a good 'un, the meter was supposed t

Hi all I have a directional coupler from Omni Spectra. It is marked with FSC16179 and PN2020-4077-20. It also indicates that the coupling is -20dB. I'd like to know the useful frequency range but can'

Just had a payment reminder although I have already paid, I nearly paid twice !! 73 Dave G4IUG

Hi all, I am planning to modify the Kuhne 10GHz transverter so I can receive the QO-100 NB transponder (downlink 10489.550 to 10489.800GHz). Could anyone please direct me onto the right path? Is it en