Is there any other source than Prologix to get listening only over the HP bus, thus allowing screen print outs rather than taking a pic with a mobile phone cheers Geoff GI0GDP

Hi Colin, See photo of a fuzzy diagram of a cct it was used in. I don't have the physical pinout to hand, will dig it out later. Osc is a bit sensitive Hz/volt on the control V, but usable up to 10G w

I meant to add these came within 3-4 days with no added cost to the e-bay price from KUHNE. They were 4 Euro each BTW. 73’s Sent from Mail for Windows 10

I'm considering making a POTY feed for 2.25 and 8.5 ghz for my 3 mtr dish. Does anyone have all the dimensions in wavelengths so I can scale to the frequencies I need please ? Been searching for 2 day

Hi Colin, Nothing like getting the data from the designer !! They were used in many of the first wave of digital TV transmitters and transposers. Phase noise is good (essential for DTV), and they were

If anyone is taking part in the group purchase (or wants to be on the waiting list for tranche 2) but hasn't joined the BVA-transverters-uk IO group, can you please join the group, or if you prefer no

HI All, For those that might need them, or just want to file them here are the connections for the DQ7016 Pin 1 O/P TTL Pin 2 Ground, O/P and – ve Pin3 NC Pin 4 Supply, 15 volt, up to 500mA switch on

Andy www.g4jnt.com

Please can anyone help me with the pinouts for the following. Dasco O.C.X.O. DQ7016 10MHz If its any good I can put it to use in a newly licenced amateurs shack. Thanks Colin de G8LBS. Sent from Mail

Just to say that I now have the info I wanted. 73 Dave G4GLT.

Hello, I do have all the printed sheets for the G8ACE multiplier but on the parts list the first line of the resistors is missing due to how it has been printed. Can anyone help please? 73 Dave G4GLT.

Can some one please confirm how the pins are on a Jupiter TU35-410-041 Is it pin 2 is oposite 1, pin 4 oposite pin 3 ETC. or do they run like an IC 1 to 10 then back up the other way 11 to 20 many tha

Greetings to all readers! First of all, does anyone know the electronics industry name given to small single-conductor 'sockets' which are usually soldered into a PCB, designed to mechanically clasp a

Good day to all fellow uW’ers Just a quickie for the intelligentsia, I have a 5.7GHz RX converter that was obtained at a Round Table from the SBRS. It was originally made by MACOM and the strip line f

Hello, Does anyone have the circuit diagram/component list for G8ACE’s 10mhz OCXO ? 73 Dave G4GLT.

Is anyone using (or plotting to use) a Hermes Lite 2 as IF for microwave transverters? I'm intending to use one with an Anglian or 70cm transverter but would like to share the pain and gnashing of tee

I believe everyone who has ordered one, has had an email this afternoon with a tracking number. If not please contact me. 73 Dave G4IUG Ex G8EAO

Ive have an Eltek 53.5V 18.7A one if anyone is still after one -- Mike GD6ICR IO74PF73TW

Having succeeded in getting operational on 23, 13, 9 and 3Cm in the past 12 months that leaves 6Cm to sort out. With the Kuhne transverter being 600 Euro (£530 today) I was wondering if there were any

Correction, the marking on the filters says 5.4 – 5.9GHz. 73’s G8LBS. Sent from Mail for Windows 10