Dammit, I missed Kents talk ! G8LBS. Sent from Mail for Windows 10

Hi all, Practical questions: 1) Going for around 15db of gain on 23cm, home made, would you build a yagi or corner reflector for a home tower installation? 2) The waveguide fed yagi, does this simplif

Gm All 10GHz aficionados", It would also be auspicious to recall in the object that it is "the transverter 10GHz designed and produced by Michel F6BVA" for the good pleasures of “the Ham community! Gr

I've ordered 25 NLB-310 amplifiers as I needed some for making these thermally-tuned cavity oscillators I'm messing with. I bought 25 because, well, why not. I only need 12, so there are 13 spares. Th

The next UKuG on-line talk will be; Care and Feeding of Yagi’s – by Kent Britain WA5VJB - Wednesday Feb-10 at 20:00 UTC Some interesting ways to doing Yagi’s and myths of Yagi Stacking. The talks will

I found this. Hope you can open it. transverter 10Ghz english.pdf (dropbox.com) De G8LBS. Sent from Mail for Windows 10

I am trying to program a new PIC for controlling a PLL, but have run into the snag that Microchip don't seem to support older versions of assembler in their current development environment. I have mad

I purchased a leo bodnar mini GPS clock to lock my IC9700. The first one that came appeared to be defective and was putting out around -2dBm after running config software, so I sent it back and was pl

Right then, these arrived this morning .. just need the Fedex man to come back and deliver the solder paste stencils that are also on his van and I can build a few up. Also delivered weresome 13cm pre

Good late evening all, Does anyone have a couple of BFR520 transistors they could be persuaded to part with please ? Thanks, in anticipation, Colin de G8LBS. Sent from Mail for Windows 10

Neil, the spreadsheet is excellent – can see where we all stand re – ‘what we have on order’ I am fortunate in that I have been a kleptomaniac over the years and have quite a bit of stuff to forward t

I am putting together the latest Scatterpoint. It would be nice to include details of any projects, or simple ‘this month I have been .....’ Pictures would be nice. As usual activity ( on air) should

For a new 10GHz beacon we plan to use an IF of around 600MHz, for this we need 4 band-pass filters. Does anyone know a source for these filters ? 2.12.0.0

Is there any other source than Prologix to get listening only over the HP bus, thus allowing screen print outs rather than taking a pic with a mobile phone cheers Geoff GI0GDP

Hi Colin, See photo of a fuzzy diagram of a cct it was used in. I don't have the physical pinout to hand, will dig it out later. Osc is a bit sensitive Hz/volt on the control V, but usable up to 10G w

I meant to add these came within 3-4 days with no added cost to the e-bay price from KUHNE. They were 4 Euro each BTW. 73’s Sent from Mail for Windows 10

I'm considering making a POTY feed for 2.25 and 8.5 ghz for my 3 mtr dish. Does anyone have all the dimensions in wavelengths so I can scale to the frequencies I need please ? Been searching for 2 day

Hi Colin, Nothing like getting the data from the designer !! They were used in many of the first wave of digital TV transmitters and transposers. Phase noise is good (essential for DTV), and they were

If anyone is taking part in the group purchase (or wants to be on the waiting list for tranche 2) but hasn't joined the BVA-transverters-uk IO group, can you please join the group, or if you prefer no

HI All, For those that might need them, or just want to file them here are the connections for the DQ7016 Pin 1 O/P TTL Pin 2 Ground, O/P and – ve Pin3 NC Pin 4 Supply, 15 volt, up to 500mA switch on