-------- Weitergeleitete Nachricht -------- Betreff: [Moon] 10ghz eme beacon Datum: Sat, 18 Mar 2023 05:54:55 +0000 Von: Per Dudek via Moon <moon@...> Antwort an: Per Dudek <per@...> An: moon-net@...,

Looks like the repercussions of the Galileo GPS project are beginning to be felt in the .eu now ... Austrian amateurs just had their power output limited to 10W ... be interesting to see how this spre

Well, an hour & 15 minutes to re-fit one SMC free socket, back on the cable it came on. But done, it doesn't spin on the cable any more, and the centre contact if anything is slightly (0.5mm) recessed

The UK Microwave Group AGM will take place at the Martlesham Microwave Round Table on 16th April. The calling notice is attached and will appear in Scatterpoint imminently. We are always looking for v

btinternet.com@groups.io> wrote:

The FRARS 10 GHz EME Project history PDF published in the current Scatterpoint is now also available in the UKuG Wiki at https://wiki.microwavers.org.uk/Main_Page#Microwave_EME One day soon, I'm going

I've just bought one of these on eBay. https://www.ebay.co.uk/itm/254908937882 The seller has a few left and he is taking offers also. I've tweeked it for 13cm and it seems pretty flat across 2.3 and

Hello all. I am trying to find the data for F1OPA RF detector V1. Vincent’s old google site is gone and now he only trades via Passion Radio. I don’t suppose anybody downloaded the following file? The

We did some mods to our TX matching at G4RFR yesterday pm and then did a Sun noise RX check .To our surprise we saw 17dB of Solar output ,which exceeds our normal level by approximately 1.5dB . This w

Hi, a friend of mine needs the connection for both the control connector as the HV connector of a EEV N10038. A complete datasheet and/or a manual with power supply schematic would be nice also. tnx R

More as a joke or a bit of nonsensical fun, has anyone ever tried WSPR on 10GHz? Might strike lucky on a clean path if you have good LO stability and accuracy. Andy www.g4jnt.com

John, Paul and Neil, many thanks for your assistance pointing me to sources for the M5stack. I followed John's footsteps to Mouser whose price was conveniently just over the line for free postage. Now

I'm sure I recently read in passing as an aside to a different thread (but can't find it now) a comment from someone who said they "made a 3 band feed that worked well"...I'd be grateful for more deta

I've recently picked up one of these units with a view to using it on 5.7GHz. I have a 'identical' unit labelled for 5.85-6.425GHz that works fine. Initial explorations showed NO RF out (low level dri

I believe I have now dealt with all of the requests for an SMC angle connector and one or two BNC/SMC adaptors. I still have a few left if any one wants them for their F1CJN HP diode power meter? The

A few months ago there were people looking for 2C39 tubes. I found a box with 14 of them. 2 seem to be new in box. Quality unknow, memory to bad to remember, no guarantee! Looking for a good home for

Version 2 update of the firmware from Alain is available now on the listeATV group list (no login needed). See https://groups.io/g/listeATV/message/4259 for details and download. Also includes documen

Photo attached, these are all tested as working, as they were pulled from working service. Better than a gas-tube-only protector, which isn't frequency specific. I expect these to be DC short. 20 GBP/

The attached pic came off a pop up advert this morning and it makes me wonder .... Have we gone a bit OTT when soldering iron stations have to have Blu Tooth and presumably full network connectivity w

Just picked up a 23cm VLNA and to my surprise the HEMT is missing. They don't seem to be freely available. There is one on eBay, but as it has not got any markings in the picture, I wonder if it is ge