Hi Martin I was informed a copy might be posted on the BATC site My question is is there a listing of these Lectures with dates times and how to listen to them Regards Paul From: UKMicrowaves@...

Hi all There is a Hewlett Packard Tracking Generator 8443A on ebay for £40 20 hrs left nothing to do with me but I couldn’t even do the box for £30 Paul No virus found in this message. Checked by AVG

Hi Martine I did send you an email expressing my interest in the scalier and detectors but unfortunately no reply Regards Paul From: UKMicrowaves@groups.io [mailto:UKMicrowaves@groups.io] On Behalf Of

Hi all just bean testing a commercial variable vane attenuator 0 to 60 db but although the vane rotates the attenuation dues not increase after 35 dB Has any one come across this before the wave guide

Hi all Can any one help me as I am looking for a small oscilloscope 12 volts powered Preferably a Tektronix 314 or 335 or possibly a 305 preferably working Regards Paul

Hi Roger There were a lot of 3 port waveguide switches in wave guide 22 available and these are also usable for 47 ghz Paul From: UKMicrowaves@groups.io [mailto:UKMicrowaves@groups.io] On Behalf Of Ro

Hi Noel Are you using WG22 26 to 40 ghz wave guide as this works on 24 and 47 ghz ? If so what wave guide parts do you require Paul From: UKMicrowaves@groups.io [mailto:UKMicrowaves@groups.io] On Beha

Hi Murray Thanks for posting the HP document even though I referred to the same document for my last post I didn’t think of posting it but it dues explain a lot about what dues what Just trying to sor

Hi Andy Thank you for the link to the Anritsu catalogue also information about SMA , 3.5 and 2.92 that are all mate with each other and going as high as 40 Ghz when using 2.92 to 2.92 I think the best

Hi Neil regarding shipping Are they going to charge for packing ? and how much will the shipping be ? Regards Paul

Hi Robin Actually I don’t think I have actually measured the signals on the head probably put them on a scope in my early days what HP power meter set up do you have ? Sorry I don’t have your location

Hi robin I live in West Sussex on the south coast UK I will check out but I should have 2 off Marconi 6960 B providing they are working sorry neither is for sale As they are part of a proposed Calibra

Hi Andy Could you explain G4JNT Yep, totally different project Ad com back with information about the other 122 Ghz project Best regards Paul From: UKMicrowaves@groups.io [mailto:UKMicrowaves@...

Hi Robin OK on the Mains filter Did I also mention there is a socket on the back for the power meter and a lot are configured not to use the socket on the front it can be easily changed inside Regards

Regarding 6960B not recognising the sensor there is often a socket for the sensor on the back of the unit and this could be the one in use just open it up and you can easily change it so the front soc

Hi Robin Regarding the "slightly dysfunctional" meter If you are talking about a Marconi 6960 B then watch out for the IEC socket as it is also a mains filter and they have a tendency to go bang I had

Hi Mark You say you are looking for wave guide for 24 Ghz can I ask what you want it for ?? as you can use wave guide that is ment for 26 to 40 Ghz this being WG 22 or WR28 as its cut of point is norm

Hi Murray thank you for the refrains to IEEE 1785 Unfortunately I am not a member of the IEEE so Could you or someone please help me with a PDF of the paper Regards Paul B From: UKMicrowaves@groups.io

Hi all If I find any front pointing radar dishes is there any interest ? and how much £ They would be commercial whether radar dishes including wave guide swivels and Control motors to move it X & Y p

Hi what was the nose radar from military or civil Paul From: UKMicrowaves@groups.io [mailto:UKMicrowaves@groups.io] On Behalf Of militaryoperator via groups.io Sent: 01 July 2020 13:03 To: UKMicrowave