Thank you Gary, I have ordered one of the units you recommended . The noise from the audio section on the 817 is bad but didn’t really want to do the internal mod. Will let you know what I think. It’s

Hello Ben, The instructions for the Kuhne 5.7ghz G2 transverter state that a BAT15-03W Schotty diode is used for the monitoring of the RF output power. I can send you a picture of the simple circuit i

Hello Chris, Yes , there are some oddities with iCloud. You could try drdavidjnewman@... That should hopefully work. Regards David.

Sorry the message was altered, Bienvenodos Mati , 73 Dave G4GLT.

Bienvenidos Mari, 73 Dave G4GLT.

Hello, I bought one of these rotators which was very reasonable on an offer recently, for portable use. It will be fine for 23 and 13 cm yagis. The only thing is that the readout is in tens of degrees

Hello again Greg, I did read Pascal’s article on the refractive index in the lower troposphere. The value N for the refractive index is derived from three variables: atmospheric pressure, temperature

PS If you find out anything useful perhaps you could share it with the group as the charts are very useful though puzzling as to how exactly they relate to the weather charts. 73 Dave G4GLT.

Hello Greg, Not sure myself but F5LEN May be able to answer your question. In the ‘About’ section of his tropospheric propagation website there is an article on the refractive index. The only problem

Thank you all for your input and help. I took away from it the usefulness of handshaking contacts. I will certainly be using them . 73 Dave G4GLT.

What about 2 small 12 v relays fed from the tx/Rx tell back contacts fed in series to the 12v power on the PA and in series to the power to the Preamp. I guess electronics is quicker than relays. Rega

Discovered that my waveguide relay does have tell back contacts. Just need to work out how to connect these to the Kuhne sequencer. I think W1GHZ has a circuit but it looks very complicated. Might tak

Like many people I will be using a Kuhne sequencer. There is no more room in the box for another waveguide relay. The amp is the 8-10 watt one . I guess a good sequencer would make sure that no transm

I also have a WG16 waveguide relay and considered the same problem with the same preamp. The waveguide relay is a 4 port job. On transmit would it help to short the waveguide port going to receive or

John , I have a 124.5 mhz Crystal that you can have free. It was tested recently and has good activity. 73 Dave G4GLT.

Hello, I have been in contact with Kuhne Electronics regarding the range of PA’s they offer for 10ghz. They currently offer 8watt and 60 watt amplifiers . I feel that for aircraft and rain scatter a m

Hello John, I would be happy to pay a subscription to get the service. 73 Dave G4GLT.

Hello David, I got a 1.25 m Gibertini from Tony Hiscox in Harlech. You could ask if he has one left. His phone number is : 07808607502 73 and GL, Dave G4GLT.

Poor English on my part. I meant logging instead of recording , although I am certainly trying to increase the number of recordings on Beaconspot. The problem as I discovered is that QSB on 10 GHz is