Planned operation as follows: Callsign: G8CUB/P Locator: Hackpen IO91CL35 (09.00 - 12.30z) Coombe Gibbet IO91GI25 (13.30 on) Bands: 24G 1W / 47G 50mW 30cm dish. 76G 50mW 30cm dish (122G 150mm horn) Ti

David, I generally agree with all your points. However as Amateurs, we need to be a lot more aware of where are spurious / unwanted emissions lie. In the past there has been very little thought of rad

Paul, I disagree with you. Existing equipment is on 122.400 in UK. The frequency is works well when you want to generate markers. 12.240 from an Elcom, or 13.600 x 9 from a low cost synth. It also all

Andy, I am along way behind on that... Will send out requests soon Roger

I agree with Noel. Lets have an informal 24 - 122G Activity day next Sunday 21st June. The last of the UK 122G orders will be posted today - phew... Roger

A local farmer uses vhf to link his people, farms and tractors. He has several farms up to 30 miles away. He had good coverage except one, which was in a valley. We used a gain antenna 8el I think, po

Useful for 144MHz PA, I have a bag of new bend 25ohm semi rigid lengths, used on a 156M 120W am commercial tx, (4 per pa) foc to anyone that can use a few Roger

In a similar vain to Andy. I have being trying to offload a Carnel Labs NM-67B 1-18GHz measurement receiver. It came out in 2003 as an update to the Stoddart NM-67. Cost circa $60k. It is too big and

Keith, The info from Francois, is what you need. However I just use the Pasolink x4 multiplier. This driven by 100mW at 11.66xx GHz gives 15-20mW out, when re-tuned. This I use as LO for a wr-28 mixer

I have the 47GHz transverter, which will be the microwave group loan unit, now working. This is based on a Pasolink unit with 25cm dish. It should be good on receive with a fundamental mixer. But, is

Please send to editor@ microwavers.org Thanks Roger

Input for Scatterpoint Does anyone have a report and or pictures from the Midland Round Table, and Heelweg? Thanks Roger

One thing I forgot to add to the article in Scatterpoint. Is that they remember the last frequency programmed. So then just a 5 & 12V supply required. Though a lock led to ground via a resistor is use

Stuart, The 2076B does not go down to 24G. Neil’s suggestion looks good, I had not seen those before. Riger

Looking to produce a Scatterpoint before Christmas. Does anyone have a constructional article they would like included? Roger G8CUB

In case you have not been following developments, in regard to the 122GHz project... Tim now has a Fund raising site where orders can be placed for the build 122G boards, bare pcb’s and horn antennas.

Planned activity weather permitting. G8CUB/P Danbury JO01GR81 10.00 local 24GHz 3W 30cm dish 47GHz 50mW 30cm dish 76GHz 50mW 30 cm dish At 1.5m agl 13.00 local Buckland IO91XX77 14.30 local Therfield

Ideal for those located in valleys. 40m tower. Or those in very deep valleys 300m tower.... https://www.ppauctions.com/auction.php?id=266 Roger G8CUB

Thanks to everyone that has emailed me with their orders. I am happy to coordinate UK orders. It makes sense they are shipped in one go. An unbelievable amount of interest! For this order, I must this