Hi, Im looking for a Kenwood TM 541/531 or similar for opperation on 23cm. Im in Ireland and I havent had much luck finding one of these. Does anyone have any suggestions? Thanks 73's Tony EI4GHB

Hi everyone, Ive recently started experimenting with 10ghz and Im currently building a 10ghz gunnplexer transceiver as a entry level project. I need to locate a 1N23 mixer diode or similar to calibrat

Hi, I've started experimenting on 10ghz with a gunnplexer txcvr and Im now looking at using a transverter so I can work SSB. One question, (-for now, Im sure I'll many more questions later!!), whats t

Hi everyone, Just a quick email to introduce myself, the names Tony Gallagher, EI4GHB. I recently ordered a 10Ghz transverter which I should receive within the next couple of weeks so hopefully you'll

Hi, I wont be working any 10Ghz from the home QTH, it will be /portable. My work takes me to many high sites across Ireland so I'm quite lucky. My kit incidently is a 50cm Procom dish with a 2watt dow

Hi. Just a quick email to see if anyone has any suggestions of how I can mount my 50cm Procom dish. As Im sure your all aware the dish doesnt come with any hardware to mount it. Im reluctant to hold t

Hi Johnathon, Thanks for that. If you come across a picture could you email it onto me if you get a chance? Thanks Tony

Hi there, While I´m waiting for my transverter to arrive I´d like to start listening to 10ghz to see if I can hear any beacons. I purchased a 10Ghz lnb sometime back on ebay and was wondering if its w

Hi Richard Its a ready built unit. I wouldnt have the test gear to setup a kit txverter. I wanted to buy something I knew was fully working and tested. Tony

Hi everyone, Quick question..... My Procom dish doesnt have a proper mount to attach it to a mast so I have to devise my own system. Here's my question.... If i place a sheet of steel or alluminium be

Hi, Yes, Richards correct! Hard for me to explain without a diagram!! :) Once I have that done, I plan to brace the top,bottom,left and right of the dish to this steel plate with aluminium strips. Tha

Hi, Im sorry if this isnt the forum for what maybe a silly question, but when setting up a dish for a qso, obviously I need the bearing, ie, 90 degees, but what position is does the dish get pointed a

Hi everyone, I posted here a few months ago about becoming opperational on ghz from Ireland, here's the update.... Myself ei4ghb, ei3ix and ei7fab are still waiting on our transverters for 10ghz to ar

Hi everyone, A quick question. At the moment I cant put up any large antennas on the QTH, but I was wondering if its worth me looking at putting a Wimo 1,2ghz panel antenna on my Chimney and fixing it

Hi everyone, Thanks for your advice and your comments. I have to put something up, I'd love to start working europe on 23cm!. I think I would get away with a Yagi and possibly a small rotator, neighbo

Ok, So I might be able to put a low profile antenna outside. Would anyone recomend a Wimo panel? They are about 140euros and claim a gain of 14db with a beam width of about 30degrees. Its lower profil

Hi, My 10ghz is another 6-8weeks away due to problem with stability. However, as I type this I'm building my brand new Khune 2.5watt 23cm unit into waterproof box. hope to be active again on 23cm in a

Hi, Its 16.00hrs GMT and I'm calling on 1296.2ssb from IO52, beaming east with 200watts ERP at 1800feet above sea level. I'll be here until 17.00GMT. 73's Tony EI4GHB

Hi, No luck today!!! Back in the shack now. Next time I'm going hill topping I'll give more notice and will head to the South Coast of EI. 73's for now.... Tony <cbartram@...> wrote: listening on

Hi, What I'm using for mobile KST acess is my Iphone. It works a treat! Even if the GPRS/3G modem in my laptop cant get a signal! I've tried it on many hills and its great. The data transfer level is