Sorry I'll be on my way back from the GM Round table so won't be QRV Enjoy! 73 John

The fake ones I received don't look like the image on ebay, my board is clearly marked ADF4351_PLL and has a single 10-pin header instead of separate 2-pin power and 6-pin control. The

Well , I think I've found the correct one , they are getting cheaper by the day ..... Two sellers , £20.88 and £14.99 .looks like the same unit ! perhaps one of each ......? , and if the chip is

It was all so long ago I've deleted the relevant emails and forgotten all about it. The OK-ones are on a black coated PCB. The suspicious one are a green PCB (you'll see what I mean when you start

Re , ADF4351 DDS rf signal source . can you give us a hint , of the bad vendor ... and the good one(s) please ........ ie , ebay number . I will be getting one of these at the end of the month

The final UK Microwave Group contest of 2016 takes place next Sunday, 13th November, on the 1.3, 2.3, and 3.4GHz bands. Times are 1000 - 1400 GMT. As usual I will compile an activity list for the

Anyone got experience of these, http://www.antennas-amplifiers.com/23cm-High-gain-Yagi-1296-MHz/23cm-1296MHz-Yagi-antenna-PA1296-18-1.5R Looking for something 1.5m length, to loose as "tv" antenna,

Thank you. Are there any other devices the same or a bit more power at a reasonable price around? It is hard hunting for microwave amplifiers on eBay, as there are tons of them.

Give them negative Ebay feedback. That soon wakes them up and makes then whinge. In spite of the vendor acknowledging my comments after his own testing and promising to send replacements, nothing

Despite asking very politely, my vendor suggested that I was insufficiently skilled to select the /32 /64 and should consult an experienced techician.... Gold star for customer

Hi, I inadvertently bought one of the suspicious ADF4351s from EBay. Just like a lot of people, on testing, the 32 & 64 dividers didn't function. Rather than create an eBay complaint or demand my

As they say up here in't North .... Nowt wrong wi that!

Excellently Ugly.... I approve.... :-)

I've repaired commerical Fire panels that look far worse. Ian 2E0IJH

Beacon hardware doesn't have to use the nicest, cleanest professionally made PCBs This is the RDDS source and controller generating the MGM for GB3SCX, after the modifications / repair last August.

they are well known - see this conversion article Cheers Simon ZL4PLM https://wayne-yoshida-kh6wz.com/2013/07/06/harris-farinon-10ghz-amplifier-for-amateur-radio-use/

GB3LEX, 10.955GHz beacon has been taken out of service for the investigation of the cause of reduced radiated output following reports that although it was audible locally listeners further away were

I was looking at this on eBay. http://www.ebay.com/itm/10-Ghz-RF-Power-Amplifier-076-108687-001-output-4w-power-at-10ghz-/252601619784 Does anyone know anything about them? Gain etc. Any suggestions

OK. That one should work. It looks like a Geeetech.com one. The important thing is that they use the Cypress chip as that it the one that is compatable with the AD drivers. Like the call sign! 73s

I will be attending the Scottish Microwave Round Table next weekend. As I'm flying up I will not be able to take many kits for sale in my carry-on luggage. Anyone going to the GMRT and wanting me to