I am just wondering why it is felt necessary to use a Pic rather than theArduino for the final version. Why not just use an Arduino ? 73 Pete GM4BYF

thanks !

oops, sorry, meant to send that just to Gordon....

Here is a rough sketch of the veroboard thing I made. Left side connector is a set of sockets which allow the ADF4351 chinese "red" boards to plug in, face towards the 629. The other

For interests sake , I've ordered five of the 629 pics ,,,, Some of our radio club members had a meeting this evening to discuss projects for the future .... so i should get some help soon ... I

In case anyone was considering ordering one of the 45W kits as an Xmas present. I've sold out! Not likely to order any more parts for the foreseeable future unless there is a sudden renewal of

Martin I will try Dimension 4, also recommended by Tony G4NBS. Spent some time last night trying to set up MSK on MSHV. Receiving OK but I need to check the PC line out as I have nothing at

Thanks Tony I will try this. 73 Peter …………………………………….

I'm not sure that there is isn't something else going on. I used to buy my largish quantities of Avago parts from a well known UK company (now French owned, I believe) and now I'm told the Avago parts

Yes, tnx to all who replied (here and individually) pointing at Mouser. You clearly use them as first point of call - with me its always Farnell then RS. I've just ordered a couple - they do look

Andy, Mouser have then in stock and supply one

The ADL5375 400MHz to 6GHz quadrature upconverter looked particularly appealing, so looked on the Farnell web site. Would you believe, it's "No Longer Stocked" Then on to RS... They have it as a

Hi Peter, Very interesting that your clock speed increases when running more apps – Irun several Dell Optiplex machines, and also a Dimension, and have never noticedthis, but then I’ve never

Surprised I see no answer to your query Peter but http://www.thinkman.com/dimension4/ is mentioned in the manual for WSJT. You can schedule it to synchronise as often as you wish Regards Tony

As per subject line. I won't be putting it on tomorrow, unless there are any special requests. Not least as the timing needs to be sorted out - it would be good to be able to keep within a second in

I wasn't. I was curious if it could decode at those narrow bandwidths and pleased and surprised it did. I usually keep the bandwidth at 3kHz unless there is a close by, interferer. I prefer the sound

Not sure its a good idea to go reducing the bandwidth for the sake of it. The waveform is over 2kHz wide, and filtering to a narrow bandwidth will only degrade the decoding process. If it were

Sorry meant to add the B/W is 1.8KHz Simon

Andy Thanks – wow what a difference looks like pure tropo tonight as very littlespread observed. report below Cheers Simon G8ATB 185840 -5 0.4 1543 & G4JNTIO90IV 4 190610 -8 3.4

It's on a heading of 348 now, so you are significantly off the side. The QL appears to have plenty of sidelobes so they could be helping, or perhaps the reflection bursts are just too frequent Andy