Evening All I'm just about to post into my UKNanowaves Group photos folder copies of Richard's SSTV pictures as received at Holme Moss last night. The quality is very good. The pictures which Richard

Bill Peter has passed this on for a reply. Our transmitters use Luminus Phlatlight PT39 or CBT40 high power LEDs. These run at a standing current of typically 5-6 amps and are amplitude modulated

Hi Peter, Thanks for the link. Would a description of the equipment used be available? Regards...Bill - N6GHz

Take a look at the following URL to see what Barry G8AGN and Richard G0RPH have been doing with their Sunday evenings! This latest test shows how well the SSTV pictures were received at both ends of a

Hi Andy, One site is GI8GJX Sam died about 10 yearsago Made my first 24 Ghz qso with him sadlymissed. Dave GM3WIL From:ukmicrowaves@... [mailto:ukmicrowaves@...] On Behalf Of Andy

I've been looking through the old site database SITES.DAT. This was originally started a very long time ago (by G3YGF and others in the BBC computer days) and I put together that version around 1990

Hi I am looking for a service manual for afarnell B30/20 PSU cheers ChrisGM4YLN

I believe GB3ZME uses frequecny locking, so you can probably assume that is correct. GB3OHM does not, so assume that is the one in error Perhaps the owners can confirm ZME locking status ?

Hi All I have been playing with my 9cm system today. I have been trying to set the OCXO so that transverter IF frequency is about right. Today I have been listening to GB3OHM and GB3ZME beacons.

I think condx may not be great now but have some time now but onky between 1520 and 1645.. GL 73 Alan GM0USI/P Sent from Samsung Mobile

Hi John I plan to be active as follows Callsign: G8DTF Locator: IO83SM Bands: 10GHz 2.5W 78cm dish Talkback: ON4KST and 144MHz Times: Various times 73 Bob G8DTF

Does anyone know of where I can get a *male* N plug that is chassis mount. Something like this http://uk.farnell.com/amphenol-connex/172118/rf-coaxial-n-plug-str-50-ohm-solder/dp/1791344 from

Callsign: G4BAO Locator: JO02cg Bands: 24GHz 1.5W 60cm dish 10GHz 1W (or 6W) 60cm dish Talkback: ON4KST Times: times that suit my day! I should add that if my new 6W 10GHz station

Hi Bryan, I'm sorry I couldn't stay and chat...sked with XDY failed - I had worked him on 3cm the week before i went to Cumbrae. Condx this pm were poor - getting better now - worked John on tropo

Its time for the activity list again for next week's UK Microwave Group contests on 5.7, 10 and 24GHz. This is the final event in the series for the Championships for these bands. Please send me your

Hi Alan, If I may, can I ask for a copy of the CD. If you can share an ISO file of the CD on dropbox I ca downloaded. If that is not a problem with you Thanks and 73's Mans. 9H1GB

In spite of the antennas only being 6m above the ground, for directions to the left and right of the ridgeline the take off from the remaining Bell Hill beacons is still good. That is roughly West

Dear Alan, Thank you for the reply. If you could let me have the RJ45 pinouts that will be fine, I can then verify them for you. No need for the CD, thank you, I think I've found any other

Hi David that was from me....I think I have a CD still and I may have a page that defines the RJ45 outputs, though as you may remember the guy who wrote it mis counted the pins. Give a day or so and

Hello John, for info: Nothing from it today here but GB3NGI 539 with QSBat 527km. 73 Ralph G4ALY