Hi everybody Weather and equipment permitting I hope to activate IO85QV21 forthose in the central lowlands and up the East coast of Scotland. Startingat 1300 approx. If there is a demand from anybody

Thanks Ian - that will be very useful. 73, Dave

When I get Time to order a Board from you , I will take some pics from inside my 746, with everything else going on I havnt got to this project Ian 2E0IJH

Hello all, I should be QRV on 10GHz from West Muirhouses Farm - Kilpatrick Hills 785ft asl IO75TW27GM on Sunday about 1300local for a few hours - wx looking a bit wet - might get some RS

Hi Lance, If you go to http://huprf.com/huprf/pat-board/ and then scroll down the page to the second table, you'll find links to all of the instructions and notes that have been posted so far. There

I hope to be out on Sunday if it's dry! G1DFL/P 10GHz 0.2W 60cm dish IO91NM Likely 3-4pm, depends on Wx. 144.175MHz always preferred, then KST or 07713 432632 Regards...Pete G1DFL

Some great SHF UKAC ideas so far that a few people have shared on this Microwave Reflector. If anyone thinks of anything else please discuss here. Andy G4PIQ's consultation document on UKAC 2017 is

G0LGS/P and 2E0MDJ/P 10GHz 1W 40cm IO81XW 1100 onwards ON4KST and 2m Talkback. Subject to weather.

A bit late this time, I will put together an activity list for the 5.7 and 10GHz contests this coming Sunday. This is the final session in this year's 5.7 and 10GHz events. Times are any 8 hours

They look nice, reasonable specification. Good enough for 10GHz, casual operation anyway. I've ordered one - also to test out Need to be careful buying all these 10MHz references on spec - could

 Andy, Thank you, I have just ordered one as per yourdescription! regards Mike G6TRM

I've recently bought a couple of these to try

Hi folks, I've just updated the website to include some guidance notes for the IC746 (not PRO) installation of the PAT board. I've also added, on the SMD 2016 page, more info about the SMD project

My one that works is a professional looking black coated PCB with connections on a 10 way header arranged 5 x 2 The dubious one(s) are on a larger, square green coated PCB with connections via 10 way

 Unless I missed a post where they were listed,could we produce a list of those ebay seller who are know to be selling pukkaADF4351 PCB's? I would like to buy one but not be caught outbuying a

Just a test – seeing if I’ve removed those blank attachments

Hi Peter/John Re Point 3 – totally agree the minimum power level should be reintroduced (this rule relates to ALL UKAC, not just SHF part though). Although not currently active on either 6M

I'm happy to take ideas from all sources, some of the topics mentioned below are already being addressed for 2017. Regarding separation of the SHF/50MHz events, the European events such as

Hi Pete, I agree completely with removing the 6m clash, but it would make more sense to keep SHF on the Tuesday (to align with continentals and give the chance of some

I meant 10GHz or 3cm and above - for the proposed 2nd monthly evening session. It would be great to have two SHF UKAC evenings a month, so we can get more folks active on the GHZ bands (as well as the