|
Re: ADF 4350
This paper by TI is an excellent intro to the subject even if it is geared towards their own products.
http://www.ti.com/lit/an/swra029/swra029.pdf
Analog Devices may do a similar technical brief for
This paper by TI is an excellent intro to the subject even if it is geared towards their own products.
http://www.ti.com/lit/an/swra029/swra029.pdf
Analog Devices may do a similar technical brief for
|
By
Andy G4JNT
·
#40539
·
|
|
Re: ADF 4350
Like yourself David , I would love to get one of these PLL things , but it's dark matter to me , and I would need some tutoring ...
Could I suggest a workshop at a future round table
Like yourself David , I would love to get one of these PLL things , but it's dark matter to me , and I would need some tutoring ...
Could I suggest a workshop at a future round table
|
By
GORDONJ REASON <gordonj.reason@...>
·
#40538
·
|
|
432 abd Above EME Newsletter for September 2016
Hello All,
The 432 MHz and Above EME Newsletter for September 2016 by K2UYH can be downloaded from:
http://www.nitehawk.com/rasmit/em70cm.html
-- Enjoy
73 Rein W6SZ
Hello All,
The 432 MHz and Above EME Newsletter for September 2016 by K2UYH can be downloaded from:
http://www.nitehawk.com/rasmit/em70cm.html
-- Enjoy
73 Rein W6SZ
|
By
rein0zn@...
·
#40537
·
|
|
Re: ADF 4350
Data sheet from:
http://www.analog.com/media/en/technical-documentation/data-sheets/ADF4350.pdf
I use custom PIC code to send the SPI commands as needed for any particular job.
You could use a PIC
Data sheet from:
http://www.analog.com/media/en/technical-documentation/data-sheets/ADF4350.pdf
I use custom PIC code to send the SPI commands as needed for any particular job.
You could use a PIC
|
By
Andy G4JNT
·
#40536
·
|
|
ADF 4350
Hello All,
Having read the messages about ADF 4351 I decided to have a dabble, but
I did not need the LF frequencies, I'm after something at 4.2GHz.
Hence I bought an ADF 435X evaluation board from
Hello All,
Having read the messages about ADF 4351 I decided to have a dabble, but
I did not need the LF frequencies, I'm after something at 4.2GHz.
Hence I bought an ADF 435X evaluation board from
|
By
David <david.g6feo@...>
·
#40535
·
|
|
FREE test equipment
Hi all
Further to my earlier list I've been working through the surplus test equipment to check that things are good enough to be saleable. The following items are not and so are offered FREE to
Hi all
Further to my earlier list I've been working through the surplus test equipment to check that things are good enough to be saleable. The following items are not and so are offered FREE to
|
By
Dave G8KHU
·
#40534
·
|
|
GMRT 2016
The GM Microwave Round Table will be on Saturday 12 November. Booking is now open on
http://www.gmroundtable.org.uk/
The programme is not yet confirmed; there will be further announcements when
The GM Microwave Round Table will be on Saturday 12 November. Booking is now open on
http://www.gmroundtable.org.uk/
The programme is not yet confirmed; there will be further announcements when
|
By
John GM8OTI
·
#40532
·
|
|
Réf. : Re: Hi can any one identify my Mimic?
Clive
print it and keep it ..
hope that PDF is visible
Francois F1CHF
-------Message original-------
De : Clive Jenner clivejenner@... [ukmicrowaves]
Date : 15/09/2016 12:25:49
A :
Clive
print it and keep it ..
hope that PDF is visible
Francois F1CHF
-------Message original-------
De : Clive Jenner clivejenner@... [ukmicrowaves]
Date : 15/09/2016 12:25:49
A :
|
By
F1CHF
·
#40533
·
|
|
Re: Hi can any one identify my Mimic? [1 Attachment]
Hi and thanks to those that kindly answered my question ref my unknown Mimic.
You have confirmed my suspicions.
73 Clive GW0PPO
Hi and thanks to those that kindly answered my question ref my unknown Mimic.
You have confirmed my suspicions.
73 Clive GW0PPO
|
By
Clive Jenner
·
#40531
·
|
|
Re: Hi canyone identify my Mimic? [1 Attachment]
AO6 would be a MAR6
By
g4bao
·
#40530
·
|
|
Re: Hi canyone identify my Mimic? [1 Attachment]
MAR6
Sam, G4DDK
By
SAM JEWELL
·
#40529
·
|
|
Re: Hi canyone identify my Mimic?
Was just about to say the same,
https://www.minicircuits.com/pdfs/MAR-6+.pdf
Ian
2E0IJH
Was just about to say the same,
https://www.minicircuits.com/pdfs/MAR-6+.pdf
Ian
2E0IJH
|
By
ian hope (2E0IJH)
·
#40528
·
|
|
Re: Hi canyone identify my Mimic? [1 Attachment]
MAR-6
'jnt
By
Andy G4JNT
·
#40527
·
|
|
Hi canyone identify my Mimic?
Hi, I wonder if anyone can identify some Mimics that I have dug out of my parts draw?
With the aid of a Magnifying glass and my bench mounted magnifying lens and pushing my eye sight to the limit I
Hi, I wonder if anyone can identify some Mimics that I have dug out of my parts draw?
With the aid of a Magnifying glass and my bench mounted magnifying lens and pushing my eye sight to the limit I
|
By
Clive Jenner
·
#40526
·
|
|
Equipment for sale
Got the following equipment for sale ...going to Crawley Sunday
Downeast microwave 2w in 8w+ out 10ghz amp
3.4ghz PLL lnb ..new ..ideal for 3.4ghz ATV repeaters
DB6NT 10ghz 200mw ATV TX plus DG0VE
Got the following equipment for sale ...going to Crawley Sunday
Downeast microwave 2w in 8w+ out 10ghz amp
3.4ghz PLL lnb ..new ..ideal for 3.4ghz ATV repeaters
DB6NT 10ghz 200mw ATV TX plus DG0VE
|
By
Steve G4HTZ
·
#40525
·
|
|
Re: Réf. : Re: Re: 5.7 GHz PAs
Just to confirm some numbers, with the SMAs changed and at 5.750 GHz
21.4 dBm in gives 36 dBm out or 140 mW in for 4 watts out and only slightly compressed.
So perhaps an out board wilkinson
Just to confirm some numbers, with the SMAs changed and at 5.750 GHz
21.4 dBm in gives 36 dBm out or 140 mW in for 4 watts out and only slightly compressed.
So perhaps an out board wilkinson
|
By
geoffrey pike
·
#40524
·
|
|
24GHz gear at Crawley
Due to a change in circumstances , there will be one possibly two 24GHz
transverters for sale at Crawley .
Both are 432 MHz I.F. , based on the Alcatel " white box " modules
and fully working
Due to a change in circumstances , there will be one possibly two 24GHz
transverters for sale at Crawley .
Both are 432 MHz I.F. , based on the Alcatel " white box " modules
and fully working
|
By
STEPHEN COOKE
·
#40522
·
|
|
Re: Crawley Round table. G4BAO kits update.
No. It's all on www.g4bao.com
No. It's all on www.g4bao.com
|
By
g4bao
·
#40521
·
|
|
Microwave equipment for sale
Got the following equipment for sale ...going to Crawley Sunday
Downeast microwave 2w in 8w+ out 10ghz amp
3.4ghz PLL lnb ..new ..ideal for 3.4ghz ATV repeaters
DB6NT 10ghz 200mw ATV TX plus DG0VE
Got the following equipment for sale ...going to Crawley Sunday
Downeast microwave 2w in 8w+ out 10ghz amp
3.4ghz PLL lnb ..new ..ideal for 3.4ghz ATV repeaters
DB6NT 10ghz 200mw ATV TX plus DG0VE
|
By
Steve G4HTZ
·
#40523
·
|
|
Re: 3cm good this morning
WebSDR is rx JO21, JO22 and JO34 beacons this (14th Sep) morning on 3cms, very strong!
Regards,
Mark EI3KD
WebSDR is rx JO21, JO22 and JO34 beacons this (14th Sep) morning on 3cms, very strong!
Regards,
Mark EI3KD
|
By
Mark Turner <ei3kd@...>
·
#40520
·
|