Hi Dave, Thanks for that, working on something here....... can control the rotator via cw/ccw switches from an Emotator control Box. Looking to use a Magetomer/Arduino project.

Hello John I already feed FR24 and planefinder. Once I have reviewed the feed download package from adsbexchange I will consider adding them to my output. I'll let you know... Dave, G1OGY

Thanks Gordon, Phil and Richard Pleased to say that normal service seems to have resumed; 13 decodes in the last hour, with the best at -14dB. Temporary aerial, 4 x 23 ele at about

Hearing it fine here in JO02SS, about 1 decode in 4 passes today reporting -23 to -21. Phil G4LPP

Hello John, I would be happy to pay a subscription to get the service. 73 Dave G4GLT.

Update on Airscout plane feed issue, pretty much as expected I'm afraid. I would be happy to collate responses to Frank on those running ADS-B RXs if you wish. 73 John G3XDY

Hi John There was a power outage at the site over the weekend - not sure when it started (sometime mid Saturday) and power was restored yesterday morning at 10:00am so maybe that’s why you didn’t

Thanks for the update. I've been missing I was thinking temperature problems. John G8IKP

Hi John Here's my (cunning) plan:- Callsign: G4ZTR Locator: JO01KW Band: 10GHz 10W 80cm offset dish Talkback: ON4KST, 144MHz Times: Various throughout Regards John

John Appears to be functioning fine here visually in IO74PC only 144Kms away but through a 230 metre very steep hill. Screen shoot attached. As to strength looks about average but about 30dB

Callsign: GW4MBS/P Locator: IO71XW Bands: 5.7GHz 8W 65cm dish 10GHz 12W 65cm dish Talkback: ON4KST, Zello SHF Chat Times: Morning & early afternoon 10GHz only Late afternoon

Hi Colin, it would be good to have some pointers to papers and documentation about how the various gyrotron variants all work. Most of the Google hits and literature searches produce

The recent query about G8MBU has reminded me to ask about GB3NGI on 23cms:- A couple of weeks ago I used aircraft scatter to compare a dish with a small box of yagis, and on both antennas I had

Thanks to all who have replied. 73, Phil G4LPP

Phil, Bob , G8MBU , emailed me last week to say he had no option other than to temp. turn off G8MBU as it is housed in a commercial premises and he was unable to add any more forced air cooling to

Callsign: G4BXD Locator: IO82UJ Bands: 10GHz 6W 46cm dish Talkback: ON4KST Times: Various throughout

Thanks very much for that Phil. Good to know it’s not my gear. Hope there’s no damage to the beacon. 73, Phil G4LPP

The next sessions of the UKuG 5.7GHz and 10GHz Contests take place this Sunday, 31st July from 0600 - 1800 GMT (0700 - 1900 BST). Entrants can operate for a maximum of 8 hours during the contest

Nope, the pin is outside the housing, I just undid the bolt four turns and the motor housing slipped off. The photo of the socket is the inside of the hole where the shaft fits. Pin

Or 85cm! David